Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] U. Lehnert, P. Michel, R. Schurig, A. A. Aksoy, P. E. Evtushenko, and J. M. Kr?ñmer, “Bunch Compression of the Low-energy ELBE Electron Beam for Super-radiant THz Sources”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1123-1125. doi:10.18429/JACoW-IPAC2014-TUPRO044
[n] B. X. Yang, W. Berg, A. R. Brill, J. C. Dooling, L. Erwin, and A. F. Pietryla, “Beam Measurements of a Large Solid-Angle Beam Loss Monitor in the APS”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM042, pp. 228-232.
[n] M. Zhang and Q. G. Zhou, “Study of Nonlinear Beam Dynamics Effects for DEPU at SSRF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC075, pp. 1347-1349.
[n] W. Zhang, Q. G. Zhou, and H. F. Wang, “The Magnetic Performance of Two Undulators for HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA033, pp. 2202-2204.
[n] S. Tomassini, “Measurement and Vibration Studies on the Final Focus Doublet at DANE and new collider Implications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME009, pp. 1580-1582.
[n] D. Kostin et al., “European XFEL: Accelerating Module Repair at DESY”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 127-130. doi:10.18429/JACoW-SRF2019-MOP034
[n] P. J. Horne, “Implementation of an INTEL 8080 Microprocessor Development System Using Existing Minicomputers”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1772-1774.
[n] R. M. Scrivens, “High Charge State Ion Beam Production from a Laser Ion Source”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP22, pp. 378-380.
[n] S. Schreiber and B. Faatz, “First Lasing at FLASH2”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOA03, pp. 7-8.
[n] D. Alesini et al., “High Power Test Results of the Eli-NP S-Band Gun Fabricated with the New Clamping Technology Without Brazing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3662-3665. doi:10.18429/JACoW-IPAC2017-THOBB1
[n] S. Seddon-Stettler, M. Liepe, N. Sitaraman, and T. Oseroff, “Novel materials for beam acceleration”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2730-2732. doi:10.18429/JACoW-IPAC2024-WEPS15
[n] A. Endo, K. Sakaue, M. Washio, and H. Mizoguchi, “Optimization of High Average Power FEL Beam for EUV Lithography Application”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper FRA04, pp. 990-992.
[n] O. Frasciello, S. Tomassini, M. Zobov, A. Grudiev, N. Mounet, and B. Salvant, “Geometric Beam Coupling Impedance of LHC Secondary Collimators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1677-1679. doi:10.18429/JACoW-IPAC2014-TUPRI049
[n] L.-H. Yu, “Remembering Samuel Krinsky”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOA01, pp. XX-XX.
[n] M. Cavenago, T. Kulevoy, and S. Petrenko, “Operation of the LNL ECR Ion Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B12, pp. 2417-2419.
[n] H. F. Wang, W. Zhang, and Q. G. Zhou, “Application of Magnetic Field Integral Measurement of Magnet Module to Research Alterable Gap Undulator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME021, pp. 3549-3551.
[n] L. Catani et al., “Exploring a New Paradigm for Accelerators and Large Experimental Apparatus Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS028, pp. 856-859.
[n] D. R. Xu and H. Xu, “COHERENT SYNCHROTRON RADIATION FIELD AND THE ENERGY LOSS IN A WAVY BEAM”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1650-1653. doi:10.18429/JACoW-IPAC2015-TUPJE016
[n] E. Schneidmiller and M. V. Yurkov, “Circular Polarization Control by Reverse Undulator Tapering”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOC01, pp. 297-299.
[n] D. Xiang, “Phase Space Manipulations in Modern Accelerators”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOB03, pp. 16-21.
[n] S. M. Polozov et al., “Transport System for Ion Implantation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC155, pp. 439-441.
[n] N. J. Norris, J. L. Detch, C. L. Hudson, S. M. Kocimski, and C. R. Sawyer, “EGG Electron Linac Modifications”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-42, pp. 546-548.
[n] P. Anger, V. C. Cingal, C-P. Pacary, S. P. G. Perret-Gatel, and A. Savalle, “Safety System for the Respect of Nuclear Requirements of SPIRAL2 Facility”, in Proc. IPAC'20, Caen, France, May 2020, pp. 57. doi:10.18429/JACoW-IPAC2020-WEVIR11
[n] Y. U. Jeong, “Small-scale Accelerator-based Radiation Sources and Their Applications”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOB02, pp. 14-15.
[n] G. Ren, W. Li, Y. Li, and M. Zeng, “Simulation for Radiation Field Caused by Beam Loss of C-ADS Injector II”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC47, pp. 489-491.
[n] M. Cavenago, T. Kulevoy, and S. Petrenko, “Beams from RF Ovens and ECR Ion Sources”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT065, pp. 1303-1305.
[n] L. Shpani, M. Liepe, T. Oseroff, G. Eremeev, and S. Posen, “Mechanically polishing electroplated Nb3Sn for higher accelerating gradients”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 336-341. doi:10.18429/JACoW-SRF2025-TUP13
[n] M. Romagnoni, “Future Prospective for Bent Crystals in Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3545-3547. doi:10.18429/JACoW-IPAC2021-WEPAB360
[n] J. B. Farr, “The Future of Medical Linacs”, presented at the LINAC'22, Liverpool, UK, Aug.-Sep. 2022, paper FR2AA02, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- U. Lehnert, P. Michel, R. Schurig, A. A. Aksoy, P. E. Evtushenko, and J. M. Kr?ñmer, “Bunch Compression of the Low-energy ELBE Electron Beam for Super-radiant THz Sources”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1123-1125.
- B. X. Yang, W. Berg, A. R. Brill, J. C. Dooling, L. Erwin, and A. F. Pietryla, “Beam Measurements of a Large Solid-Angle Beam Loss Monitor in the APS”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM042, pp. 228-232.
- M. Zhang and Q. G. Zhou, “Study of Nonlinear Beam Dynamics Effects for DEPU at SSRF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC075, pp. 1347-1349.
- W. Zhang, Q. G. Zhou, and H. F. Wang, “The Magnetic Performance of Two Undulators for HLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA033, pp. 2202-2204.
- S. Tomassini, “Measurement and Vibration Studies on the Final Focus Doublet at DANE and new collider Implications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME009, pp. 1580-1582.
- D. Kostin et al., “European XFEL: Accelerating Module Repair at DESY”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 127-130.
- P. J. Horne, “Implementation of an INTEL 8080 Microprocessor Development System Using Existing Minicomputers”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1772-1774.
- R. M. Scrivens, “High Charge State Ion Beam Production from a Laser Ion Source”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP22, pp. 378-380.
- S. Schreiber and B. Faatz, “First Lasing at FLASH2”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOA03, pp. 7-8.
- D. Alesini et al., “High Power Test Results of the Eli-NP S-Band Gun Fabricated with the New Clamping Technology Without Brazing”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3662-3665.
- S. Seddon-Stettler, M. Liepe, N. Sitaraman, and T. Oseroff, “Novel materials for beam acceleration”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS15, pp. 2730-2732.
- A. Endo, K. Sakaue, M. Washio, and H. Mizoguchi, “Optimization of High Average Power FEL Beam for EUV Lithography Application”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper FRA04, pp. 990-992.
- O. Frasciello, S. Tomassini, M. Zobov, A. Grudiev, N. Mounet, and B. Salvant, “Geometric Beam Coupling Impedance of LHC Secondary Collimators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1677-1679.
- L.-H. Yu, “Remembering Samuel Krinsky”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOA01, pp. XX-XX.
- M. Cavenago, T. Kulevoy, and S. Petrenko, “Operation of the LNL ECR Ion Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B12, pp. 2417-2419.
- H. F. Wang, W. Zhang, and Q. G. Zhou, “Application of Magnetic Field Integral Measurement of Magnet Module to Research Alterable Gap Undulator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME021, pp. 3549-3551.
- L. Catani et al., “Exploring a New Paradigm for Accelerators and Large Experimental Apparatus Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS028, pp. 856-859.
- D. R. Xu and H. Xu, “COHERENT SYNCHROTRON RADIATION FIELD AND THE ENERGY LOSS IN A WAVY BEAM”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1650-1653.
- E. Schneidmiller and M. V. Yurkov, “Circular Polarization Control by Reverse Undulator Tapering”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOC01, pp. 297-299.
- D. Xiang, “Phase Space Manipulations in Modern Accelerators”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOB03, pp. 16-21.
- S. M. Polozov et al., “Transport System for Ion Implantation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC155, pp. 439-441.
- N. J. Norris, J. L. Detch, C. L. Hudson, S. M. Kocimski, and C. R. Sawyer, “EGG Electron Linac Modifications”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-42, pp. 546-548.
- P. Anger, V. C. Cingal, C-P. Pacary, S. P. G. Perret-Gatel, and A. Savalle, “Safety System for the Respect of Nuclear Requirements of SPIRAL2 Facility”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 57.
- Y. U. Jeong, “Small-scale Accelerator-based Radiation Sources and Their Applications”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOB02, pp. 14-15.
- G. Ren, W. Li, Y. Li, and M. Zeng, “Simulation for Radiation Field Caused by Beam Loss of C-ADS Injector II”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC47, pp. 489-491.
- M. Cavenago, T. Kulevoy, and S. Petrenko, “Beams from RF Ovens and ECR Ion Sources”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT065, pp. 1303-1305.
- L. Shpani, M. Liepe, T. Oseroff, G. Eremeev, and S. Posen, “Mechanically polishing electroplated Nb3Sn for higher accelerating gradients”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 336-341.
- M. Romagnoni, “Future Prospective for Bent Crystals in Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3545-3547.
- J. B. Farr, “The Future of Medical Linacs”, presented at the 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, paper FR2AA02, unpublished.
Back to search