Favourites
For Word
[n] I. Zagorodnov and K. L. F. Bane, “Wakefield Calculations for 3D Collimators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH036, pp. 2859-2861.
[n] W. J. Corbett, A. M. Kiss, M. J. Boland, and C. L. Li, “Characterization of Visible Synchrotron Radiation Polarization at SPEAR3”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1240-1242. doi:10.18429/JACoW-IPAC2015-MOPWI035
[n] Y. Kawai, G. Alton, J. O. Kiggans, and D. W. Stracener, “ISOL Targets Prepared with a New Paint Infiltration Coating Method”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE016, pp. 1508-1510.
[n] S. Gurov, P. A. Bak, D. Chernousov, P. V. Logatchev, V. Pavlov, and E. Pyata, “The Measurements of the Longitudinal Beam Profile on the Preinjector VEPP-5”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOALH03, pp. 259-261.
[n] V. E. Scarpine et al., “Instrumentation Developments and Beam Studies for the Fermilab Proton Improvement Plan Linac Upgrade and New RFQ Front-End”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO1C06, pp. 315-319.
[n] F. Marti et al., “Charge Stripper Development for FRIB”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1339-1342. doi:10.18429/JACoW-IPAC2015-TUBB1
[n] X. Cui, C. H. Yu, J. Y. Zhai, and Y. Zhang, “An On-axis Injection Design for CEPC”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 143. doi:10.18429/JACoW-eeFACT2018-TUPAB05
[n] A. Salom, J. M. Alvarez, B. Bravo, and F. P?®rez, “HOM Damped Normal Conducting 1.5 GHz Cavity Design Evolution for the 3rd Harmonic System of the ALBA Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2948-2951. doi:10.18429/JACoW-IPAC2019-WEPRB060
[n] S. Wu et al., “Transverse Beam Profile Diagnostic Using Fiber Optic Array”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC32, pp. 1205-1207.
[n] Y. Liu, G. D. Alton, J. R. Beene, J. F. Liang, H. Wollnik, and Z. Zhou, “Collisional Cooling of Negative Ion Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH088, pp. 3885-3887.
[n] L. Ahle, R. Berio, L. Bernstein, and B. Rusnak, “A Neutron Source Facility for Neutron Cross-Section Measurements on Radioactive Targets at RIA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB080, pp. 989-991.
[n] N. F. Petry, M. Busch, K. K??mpel, O. Meusel, and H. Podlech, “Further Designs of HOM Couplers for Superconducting 400 MHz RF Cavities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4132-4134. doi:10.18429/JACoW-IPAC2019-THPTS013
[n] W. Stein, A. Sunwoo, V. K. Bharadwaj, D. C. Schultz, and J. C. Sheppard, “Thermal Shock Structural Analyses of a Positron Target”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH015, pp. 2111-2113.
[n] A. Leggieri, F. Di Paolo, D. Passi, A. Ciccotelli, and G. Felici, “High Transparent Matched Window for Standing Wave Linear Accelerators”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP140, pp. 1192-1195.
[n] I. Zagorodnov and N. Solyak, “Wakefields Effects of New ILC Cavity Shapes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH037, pp. 2862-2864.
[n] S. Pordes, J. L. Crisp, B. J. Fellenz, R. H. Flora, A. Para, and A. V. Tollestrup, “Signal Processing for Longitudinal Parameters of the Tevatron Beam”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT013, pp. 1362-1364.
[n] I. Zagorodnov and T. Weiland, “The Short-Range Transverse Wakefields in TESLA Accelerating Structure”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG034, pp. 3249-3251.
[n] A. C. C. Villari et al., “Commissioning and First Accelerated Beams in the Reaccelerator (Rea3) of the National Superconducting Cyclotron Laboratory, MSU”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1287-1290. doi:10.18429/JACoW-IPAC2016-TUPMR024
[n] M. Pont, N. Ayala, G. Benedetti, M. Carl?á, Z. Mart?¡, and R. N????ez-Prieto, “A Pinger Magnet System for the ALBA Synchrotron Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3039-3042. doi:10.18429/JACoW-IPAC2015-WEPMN050
[n] A. Artiomov and A. Sidorin, “Light Radiation at the Exit of RFQ and RF-field Control”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP051L, pp. 1890-1892.
[n] C. Kuo, C. J. Wang, and K. Hsu, “Electronic Logbook by Using the Hypertext Preprocessor”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_086.
[n] M. Pont, “Operation Status of ALBA Synchrotron Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP023, pp. 1659-1661.
[n] M. Pont, U. Iriso, R. Muñoz Horta, and F. Perez, “Operation of the ALBA Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC057, pp. 3023-3025.
[n] B. T. Jacobson, T. J. Campese, A. Y. Murokh, A. C. Bartnik, and B. M. Dunham, “Design and Initial Demonstration Results of Laser Wire Scanner for Energy Recovery Linacs”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF11, pp. 525-525.
[n] C. Adolphsen et al., “Wakefield and Beam Centering Measurements of a Damped and Detuned X-Band Accelerator Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA40, pp. 3477-3479.
[n] R. Pakter, J. S. Moraes, and F. B. Rizzato, “New Regions of Stability for Periodically Focused Particle Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG051, pp. 2990-2992.
For LaTeX
Use Complete Form
For BibTeX
References
- I. Zagorodnov and K. L. F. Bane, “Wakefield Calculations for 3D Collimators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH036, pp. 2859-2861.
- W. J. Corbett, A. M. Kiss, M. J. Boland, and C. L. Li, “Characterization of Visible Synchrotron Radiation Polarization at SPEAR3”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1240-1242.
- Y. Kawai, G. Alton, J. O. Kiggans, and D. W. Stracener, “ISOL Targets Prepared with a New Paint Infiltration Coating Method”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE016, pp. 1508-1510.
- S. Gurov, P. A. Bak, D. Chernousov, P. V. Logatchev, V. Pavlov, and E. Pyata, “The Measurements of the Longitudinal Beam Profile on the Preinjector VEPP-5”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOALH03, pp. 259-261.
- V. E. Scarpine et al., “Instrumentation Developments and Beam Studies for the Fermilab Proton Improvement Plan Linac Upgrade and New RFQ Front-End”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper TUO1C06, pp. 315-319.
- F. Marti et al., “Charge Stripper Development for FRIB”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1339-1342.
- X. Cui, C. H. Yu, J. Y. Zhai, and Y. Zhang, “An On-axis Injection Design for CEPC”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 143.
- A. Salom, J. M. Alvarez, B. Bravo, and F. P?®rez, “HOM Damped Normal Conducting 1.5 GHz Cavity Design Evolution for the 3rd Harmonic System of the ALBA Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2948-2951.
- S. Wu et al., “Transverse Beam Profile Diagnostic Using Fiber Optic Array”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC32, pp. 1205-1207.
- Y. Liu, G. D. Alton, J. R. Beene, J. F. Liang, H. Wollnik, and Z. Zhou, “Collisional Cooling of Negative Ion Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH088, pp. 3885-3887.
- L. Ahle, R. Berio, L. Bernstein, and B. Rusnak, “A Neutron Source Facility for Neutron Cross-Section Measurements on Radioactive Targets at RIA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB080, pp. 989-991.
- N. F. Petry, M. Busch, K. K??mpel, O. Meusel, and H. Podlech, “Further Designs of HOM Couplers for Superconducting 400 MHz RF Cavities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4132-4134.
- W. Stein, A. Sunwoo, V. K. Bharadwaj, D. C. Schultz, and J. C. Sheppard, “Thermal Shock Structural Analyses of a Positron Target”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH015, pp. 2111-2113.
- A. Leggieri, F. Di Paolo, D. Passi, A. Ciccotelli, and G. Felici, “High Transparent Matched Window for Standing Wave Linear Accelerators”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP140, pp. 1192-1195.
- I. Zagorodnov and N. Solyak, “Wakefields Effects of New ILC Cavity Shapes”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH037, pp. 2862-2864.
- S. Pordes, J. L. Crisp, B. J. Fellenz, R. H. Flora, A. Para, and A. V. Tollestrup, “Signal Processing for Longitudinal Parameters of the Tevatron Beam”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT013, pp. 1362-1364.
- I. Zagorodnov and T. Weiland, “The Short-Range Transverse Wakefields in TESLA Accelerating Structure”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG034, pp. 3249-3251.
- A. C. C. Villari et al., “Commissioning and First Accelerated Beams in the Reaccelerator (Rea3) of the National Superconducting Cyclotron Laboratory, MSU”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1287-1290.
- M. Pont, N. Ayala, G. Benedetti, M. Carl?á, Z. Mart?¡, and R. N????ez-Prieto, “A Pinger Magnet System for the ALBA Synchrotron Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3039-3042.
- A. Artiomov and A. Sidorin, “Light Radiation at the Exit of RFQ and RF-field Control”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP051L, pp. 1890-1892.
- C. Kuo, C. J. Wang, and K. Hsu, “Electronic Logbook by Using the Hypertext Preprocessor”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_086.
- M. Pont, “Operation Status of ALBA Synchrotron Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP023, pp. 1659-1661.
- M. Pont, U. Iriso, R. Muñoz Horta, and F. Perez, “Operation of the ALBA Injector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC057, pp. 3023-3025.
- B. T. Jacobson, T. J. Campese, A. Y. Murokh, A. C. Bartnik, and B. M. Dunham, “Design and Initial Demonstration Results of Laser Wire Scanner for Energy Recovery Linacs”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF11, pp. 525-525.
- C. Adolphsen et al., “Wakefield and Beam Centering Measurements of a Damped and Detuned X-Band Accelerator Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA40, pp. 3477-3479.
- R. Pakter, J. S. Moraes, and F. B. Rizzato, “New Regions of Stability for Periodically Focused Particle Beams”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG051, pp. 2990-2992.
Back to search