Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. L. Kramer, “NSLS-II Beam Loss Monitor System”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG5003, pp. 116-120.
[n] G. Velev et al., “Field Quality of the LHC Inner Triplet Quadrupoles being Fabricated at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE015, pp. 1969-1971.
[n] P. J. Viccaro, D. W. Carnegie, and R. Savoy, “Magnetic Field Tolerances for Insertion Devices on Third Generation Sychrotron Light Sources”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1091-1096.
[n] B. Rusnak et al., “Status of RF Superconductivity at Los Alamos National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B05, pp. XX-XX.
[n] C.Zhang, “An overview of the BEPCII project”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH01, pp. XX-XX.
[n] A. I. Drozhdin et al., “Beam Loss, Residual Radiation, and Collimation and Shielding in the Fermilab Booster”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH053, pp. 2569-2571.
[n] A. V. Rauchas, F. R. Brumwell, and G. J. Volk, “Commissioning of the Argonne Intense Pulsed Neutron Source (IPNS-I) Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3006-3009.
[n] C. E. Hill and M. O, “The High Voltage System for the High Intensity CERN Proton Source”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4051, pp. 165-167.
[n] M. K. Sullivan, K. J. Bertsche, A. Novokhatski, J. Seeman, and U. Wienands, “Changing the PEP-II Center-of-Mass Energy down to 10 GeV and up to 11 GeV”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP052, pp. 2613-2615.
[n] R. Petrocelli, D. Alloza, S. Blanch-Torn?â, and O. Matilla, “Upgrade of Control System of ALBA Main Booster Power Supplies”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1374-1376. doi:10.18429/JACoW-ICALEPCS2017-THPHA018
[n] S. H. Kim et al., “The Fast Interlock Controller for High Power Pulse Modulator at PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3561-3563. doi:10.18429/JACoW-IPAC2016-THPMW012
[n] R. Akre, G. Barillas, and M. Mitchell, “Calibration System for SLC 476 MHz to 2856 MHz Multipliers”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P024, pp. 3024-3026.
[n] P. vom Stein et al., “A Superconducting Landau Accelerator Module for BESSY II”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH167, pp. 1175-1176.
[n] A. Ando, A. Araki, and M. Kihara, “Prototype Multipole Magnets for the KEK Main Ring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1266-1269.
[n] J. F. Bridges, “Modifications to the Fermilab Booster-Main Ring Beam Transfer Phase Lock Circuit”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3337-3340.
[n] Y. Hashimoto et al., “Development of a Beam Profile Monitor using a Nitrogen-Molecular Jet for the J-PARC MR”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF17, pp. 848-851.
[n] J. M. Brennan et al., “Operation of the RHIC RF Systems”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA006, pp. 476-478.
[n] D. Li et al., “Design and Fabrication of an 805 MHz RF Cavity with Be Windows for a High RF Power Testing for a Muon Cooling Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH062, pp. 918-920.
[n] R. O. Hettel et al., “Status of the PEP-X Light Source Design Study”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP114, pp. 2336-2338.
For LaTeX
Use Complete Form
For BibTeX
References
- S. L. Kramer, “NSLS-II Beam Loss Monitor System”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG5003, pp. 116-120.
- G. Velev et al., “Field Quality of the LHC Inner Triplet Quadrupoles being Fabricated at Fermilab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE015, pp. 1969-1971.
- P. J. Viccaro, D. W. Carnegie, and R. Savoy, “Magnetic Field Tolerances for Insertion Devices on Third Generation Sychrotron Light Sources”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1091-1096.
- B. Rusnak et al., “Status of RF Superconductivity at Los Alamos National Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93B05, pp. XX-XX.
- C.Zhang, “An overview of the BEPCII project”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper MOACH01, pp. XX-XX.
- A. I. Drozhdin et al., “Beam Loss, Residual Radiation, and Collimation and Shielding in the Fermilab Booster”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH053, pp. 2569-2571.
- A. V. Rauchas, F. R. Brumwell, and G. J. Volk, “Commissioning of the Argonne Intense Pulsed Neutron Source (IPNS-I) Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3006-3009.
- C. E. Hill and M. O, “The High Voltage System for the High Intensity CERN Proton Source”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4051, pp. 165-167.
- M. K. Sullivan, K. J. Bertsche, A. Novokhatski, J. Seeman, and U. Wienands, “Changing the PEP-II Center-of-Mass Energy down to 10 GeV and up to 11 GeV”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP052, pp. 2613-2615.
- R. Petrocelli, D. Alloza, S. Blanch-Torn?â, and O. Matilla, “Upgrade of Control System of ALBA Main Booster Power Supplies”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1374-1376.
- S. H. Kim et al., “The Fast Interlock Controller for High Power Pulse Modulator at PAL-XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3561-3563.
- R. Akre, G. Barillas, and M. Mitchell, “Calibration System for SLC 476 MHz to 2856 MHz Multipliers”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P024, pp. 3024-3026.
- P. vom Stein et al., “A Superconducting Landau Accelerator Module for BESSY II”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH167, pp. 1175-1176.
- A. Ando, A. Araki, and M. Kihara, “Prototype Multipole Magnets for the KEK Main Ring”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1266-1269.
- J. F. Bridges, “Modifications to the Fermilab Booster-Main Ring Beam Transfer Phase Lock Circuit”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3337-3340.
- Y. Hashimoto et al., “Development of a Beam Profile Monitor using a Nitrogen-Molecular Jet for the J-PARC MR”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF17, pp. 848-851.
- J. M. Brennan et al., “Operation of the RHIC RF Systems”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAA006, pp. 476-478.
- D. Li et al., “Design and Fabrication of an 805 MHz RF Cavity with Be Windows for a High RF Power Testing for a Muon Cooling Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH062, pp. 918-920.
- R. O. Hettel et al., “Status of the PEP-X Light Source Design Study”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP114, pp. 2336-2338.
Back to search