JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. Kako et al., “Initial Tests of L-band Niobium Superconducting Cavities for Linear Collider Application”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F18, pp. XX-XX. 
[n]	J. Bauche and A. V. Aloev, “Design of the Beam Transfer Line Magnets for HIE-ISOLDE”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1289-1291. doi:10.18429/JACoW-IPAC2014-TUPRO104
[n]	P. E. Evtushenko, T. E. Cowan, U. Lehnert, and P. Michel, “Concept of High-Power CW IR-THz Source for the Radiation Source Elbe Upgrade”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 59-61. doi:10.18429/JACoW-FEL2019-TUP008
[n]	V. Previtali, G. Stancari, A. Valishev, and S. Redaelli, “Hollow Electron Lens Simulation for the SPS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO043, pp. 990-992. 
[n]	F. Hug, K. Aulenbacher, R. G. Heine, B. Ledroit, and D. Simon, “MESA - an ERL Project for Particle Physics Experiments”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 313-315. doi:10.18429/JACoW-LINAC2016-MOP106012
[n]	D. A. Bartkoski, A. V. Aleksandrov, S. M. Cousineau, S. Henderson, and J. A. Holmes, “The Development of Computational Tools for Halo Analysis and Study of Halo Growth in the Spallation Neutron Source Linear Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOAFI01, pp. 2768-2770. 
[n]	P. Emma and T. O. Raubenheimer, “Circumference Correction Chicanes for Damping Rings”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA23, pp. 3438-3440. 
[n]	C. Dimopoulou, A. Dolinskii, F. Nolden, C. Peschke, and M. Steck, “Stochastic Cooling of Antiprotons in the Collector Ring at FAIR”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD005, pp. 376-378. 
[n]	B. Erdelyi et al., “An Accumulator/Pre-Booster for the Medium-Energy Electron Ion Collider at JLab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP206, pp. 1873-1875. 
[n]	J. Xu, P. F. Fisher, M. Min, B. Mustapha, J. A. Nolen, and P. N. Ostroumov, “Developing Peta-Scalable Algorithms for Beam Dynamic Simulations”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUYMH03, pp. 1256-1260. 
[n]	A. Huschauer, S. S. Gilardoni, and R. Wasef, “Influence of the Alignment of the Main Magnets on Resonances in the CERN Proton Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 392-394. doi:10.18429/JACoW-IPAC2015-MOPJE046
[n]	D. J. Crawford et al., “First Beam and High-Gradient Cryomodule Commissioning Results of the Advanced Superconducting Test Accelerator at Fermilab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1831-1833. doi:10.18429/JACoW-IPAC2015-TUPJE080
[n]	D. Gamba, R. Corsini, T. Persson, P. K. Skowronski, F. Tecker, and P. Burrows, “Dispersion Free and Dispersion Target Steering Experience at CTF3”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 83-86. doi:10.18429/JACoW-LINAC2016-MOPRC008
[n]	P. Krejcik, M. L. Campell, J. M. D, H. Loos, and K. Luchini, “Performance of the New Fast Wire Scanner at the LCLS”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 547-549. doi:10.18429/JACoW-IBIC2015-TUPB082
[n]	C. Rimbault, P. Bambade, S. Kuroda, G. R. White, and M. Woodley, “Coupling Correction in ATF2 Extraction Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP005, pp. 4314-4316. 
[n]	M. Ferrario et al., “Advanced Beam Dynamics Experiments with the SPARC High Brightness Photoinjector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE082, pp. 2311-2313. 
[n]	X. Yang et al., “Accurate prediction of mega-electron-volt electron beam properties from UED using machine learning”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4452-4455. doi:10.18429/JACoW-IPAC2023-THPL014
[n]	Y. L. Huang, R. A. Rimmer, H. Wang, and S. Wang, “Beam Dynamics Analysis for the Ultra-fast Kicker in Circular Cooler Ring of JLEIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 510-513. doi:10.18429/JACoW-IPAC2016-MOPMY001
[n]	J. S. Oh et al., “Efficiency Issue in C-Band Klystron-Modulator System for Linear Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W013, pp. 593-595. 
[n]	J. G. Power, C.-J. Jing, and I. Jovanovic, “High Frequency Bunch Train Generation from an RF Photoinjector at the AWA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP047, pp. 464-466. 
[n]	T. Asaka et al., “Development Status of RF System of Injector Section for XFEL/SPring-8”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE025, pp. 2194-2196. 
[n]	M. J. Barnes et al., “Upgrade of the LHC Injection Kicker Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA030, pp. 729-731. 
[n]	M. K. Kempkes, R. Ciprian, M. P. J. Gaudreau, T. H. Hawkey, and K. Schrock, “A Klystron Power System for the ISIS Front End Test Stand”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD097, pp. 3326-3328. 
[n]	M. Min, Y.-C. Chae, and P. F. Fisher, “Spectral-Element Discontinuous Galerkin Simulations for Wake Potential Calculations: NEKCEM”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN091, pp. 3435-3437. 
[n]	V. Ayvazyan, S. Choroba, Z. Geng, G. Petrosyan, S. Simrock, and V. Vogel, “Optimization of Filling Procedure for TESLA-type Cavities for Klystron RF Power Minimization of European XFEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA039, pp. 1416-1418. 
[n]	C. Chang, J. Neilson, C. Pellegrini, M. Shumail, and S. G. Tantawi, “Single Electron Dynamic of Microwave Undulator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP085, pp. 753-755. 
[n]	T. Himel and K. A. Thompson, “Energy Measurements from Betatron Oscillations”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1529-1531. 
[n]	E. Cano Vargas et al., “Timing Stability Comparison Study of RF Synthesis Techniques”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 325-327. doi:10.18429/JACoW-FEL2019-WEP004
[n]	J. A. Holmes, S. M. Cousineau, S. Henderson, and M. A. Plum, “Simulations for SNS Ring Commissioning”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH130, pp. 348-350. 
[n]	M. Kinsho, “Status of J-PARC 3 GeV RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP083, pp. 3927-3929. 
[n]	R. M. Zwaska, S. C. Childress, A. I. Drozhdin, N. V. Mokhov, and I. S. Tropin, “Beam Loss Protection for a 2.3 Megawatt LBNE Proton Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD041, pp. 454-456. 
[n]	J. M. D, M. L. Campell, P. Krejcik, H. Loos, and K. Luchini, “Fast Wire Scanner Upgrade for LCLS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 114-116. doi:10.18429/JACoW-ICALEPCS2015-MOPGF015
[n]	G. Chlachidze et al., “Quench Performance and Field Quality of 90-mm Nb3Sn Quadrupoles of TQC Series”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD034, pp. 3581-3583. 
[n]	B. Autin et al., “The CERN Antiproton Collector Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 308-311. 
[n]	G. Geloni, P. Ilinski, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Method for the Determination of the Three-Dimensional Structure of Ultrashort Relativistic Electron Bunches”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC47, pp. 607-610. 
[n]	M. Heilmann et al., “High Current Proton and Carbon Beam Operation via Stripping of a Molecular Beam at GSI UNILAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1390-1393. doi:10.18429/JACoW-IPAC2016-TUPMR057
[n]	M. Aiba, M. B?Âge, F. Marcellini, A. Saa Hernandez, and A. Streun, “Longitudinal Top-up Injection for Small Aperture Storage Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1842-1844. doi:10.18429/JACoW-IPAC2014-WEOAA01
[n]	D. Raparia et al., “Reliability and Intensity Upgrade for 200 MeV Linac at Brookhaven National Laboratory”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP011, pp. 67-69. 
[n]	F. Hug et al., “Cryogenic Installations for Module Tests at Mainz”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 997-1002. doi:10.18429/JACoW-SRF2019-THP054
[n]	D. Xu, Y.-K. Kan, and Y. Luo, “Vertical emittance growth from IBS diffusion via beam-beam coupling in the EIC”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 621-625. doi:10.18429/JACoW-NAPAC2025-TUP104
[n]	K. Flippo et al., “Multi-MeV Ion Beams from Terawatt Laser Thin-Foil Interactions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH002, pp. 2081-2083. 
[n]	F. Schmidt et al., “Code Bench-Marking for Long-Term Tracking and Adaptive Algorithms”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 357-361. doi:10.18429/JACoW-HB2016-WEAM1X01
[n]	V. S. Kashikhin, N. Andreev, Y. Orlov, D. F. Orris, and M. A. Tartaglia, “Superconducting Magnets for SCRF Cryomodules at Front End of Linear Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB050, pp. 379-381. 
[n]	F.-J. Decker et al., “Emittance Control for Different FACET Beam Setups in the SLAC Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPLB01, pp. 138-140. 
[n]	D. Pellegrini, A. Latina, D. Schulte, and S. A. Bogacz, “Single and Multi-bunch End-to-end Tracking in the LHeC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 459-461. doi:10.18429/JACoW-IPAC2015-MOPJE066
[n]	F. Schlander, K. Aulenbacher, R. G. Heine, D. Simon, and T. Stengler, “1.3 GHz SRF Cryomodules for the Mainz Energy-recovering Superconducting Accelerator MESA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2853-2855. doi:10.18429/JACoW-IPAC2015-WEPMA041
[n]	F. M?®ot, S. J. Brooks, J. A. Crittenden, D. Trbojevic, and N. Tsoupas, “A Full Field-Map Modeling of Cornell-BNL CBETA 4-Pass Energy Recovery Linac”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 186-190. doi:10.18429/JACoW-ICAP2018-TUPAF08
[n]	M. A. Plum, T. V. Gorlov, J. A. Holmes, T. Hunter, R. T. Roseberry, and J. G. Wang, “Challenges for the SNS Ring Energy Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD069, pp. 520-522. 
[n]	G. Wu, S. Aderhold, M. Checchin, M. Martinello, and J. P. Ozelis, “Error Analysis on RF Measurement Due to Imperfect RF Components”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB098, pp. 840-843. 
[n]	Y. Luo et al., “Burn-off Dominated Uranium and Asymmetric Copper-gold Operation in RHIC”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUXA1, pp. 369-373. 
[n]	M. Hu, “Fermilab Recycler Diagnostics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH066, pp. 1363-1365. 
[n]	H. H. Feldmann, “Non-Intercepting Ion Phase Measuring Equipment of the Isochronous Cyclotrons at Karlsruhe and J??lich”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-005, pp. XX-XX. 
[n]	W. Wuensch et al., “Fabrication and High-Gradient Testing of an Accelerating Structure Made From Milled Halves”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 845-848. doi:10.18429/JACoW-LINAC2016-THPLR003
[n]	D. M. Dykes et al., “The Economic Optimisation of the Main Parameters of the 3 GeV Electron Booster Synchrotron for DIAMOND”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B05, pp. 657-659. 
[n]	M. O. A. El Ghazaly, V. Aleksandrov, A. A. Alzeanidi, A. I. Papash, and C. P. Welsch, “Design of a Versatile Injector for a Low-energy Experimental Platform at KACST”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP015, pp. 3404-3406. 
[n]	L. Liu, X. R. Resende, A. R. D. Rodrigues, and F. H. de S?í, “A New Booster Synchrotron for the Sirius Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1959-1961. doi:10.18429/JACoW-IPAC2014-WEPRO009
[n]	M. Aicheler et al., “Status of the CompactLight Design Study”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 738-741. doi:10.18429/JACoW-FEL2019-THP078
[n]	J. I. M. Botman et al., “Initial Design of a phi Factory”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 311-314. 
[n]	R. E. Pollock et al., “Infllection and Extraction Systems at the Indiana University Clyclotron Facility”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1094-1097. 
[n]	J. Steimel et al., “The Six-Cavity Test - Demonstrated Acceleration of Beam with Multiple RF Cavities and a Single Klystron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP062, pp. 3877-3879. 
[n]	E. Koukovini, K. S. B. Li, N. Mounet, G. Rumolo, and B. Salvant, “Impedance Effects in the CLIC Damping Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC050, pp. 1111-1113. 
[n]	J. C. McNeur et al., “A Tapered Dielectric Structure for Laser Acceleration at Low Energy”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD047, pp. 4387-4389. 
[n]	Y. Ding, K. L. F. Bane, and Y. M. Nosochkov, “Beam Shaping for High-Repetition-Rate X-Ray FELs”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 661-664. doi:10.18429/JACoW-FEL2019-THP035
[n]	Y. Watanabe and N. Tani, “Development of a Feedback Control System for Resonant Power Supplies in the J-PARC 3-GeV Synchrotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA005, pp. 672-674. 
[n]	A. Freyberger, “Commissioning and Operation of 12 GeV CEBAF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. XX-XX. doi:10.18429/JACoW-IPAC2015-MOXGB2
[n]	M. Satoh, E. Kadokura, and T. Suwada, “Experiments on Laser-Based Alignment at the KEKB Injector Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB056, pp. 2818-2820. 
[n]	T. Hart, D. J. Summers, and K. Paul, “Magnetic Field Expansion Out of a Plane: Application to Cyclotron Development”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP190, pp. 1846-1848. 
[n]	S. Guiducci and L. Palumbo, “General Considerations on a Damping Ring for a 5-10 GeV Linear Collider”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 508-511. 
[n]	K. Shafak et al., “Synchronous Laser-Microwave Network for Attosecond-Resolution Photon Science”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 286-289. doi:10.18429/JACoW-IBIC2016-TUBL03
[n]	M. Giovannozzi, S. S. Gilardoni, C. Hernalsteens, A. Lachaize, and G. Metral, “Modified Extraction Scheme for the CERN PS Multi-Turn Extraction”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD060, pp. 502-504. 
[n]	G. Xu, I. Jovanovic, and S. F. Wandel, “Development of a High-Energy Short-pulse 5-m Parametric Source for Dielectric Laser Acceleration”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1460-1462. doi:10.18429/JACoW-IPAC2014-TUPME045
[n]	T. Mimashi et al., “The Design of Beam Abort System for the Super KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA023, pp. 1378-1380. 
[n]	J.-M. De Conto, “ETOILE: The Hadrontherapy Project for Lyon (France)”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI081, pp. 2724-2726. 
[n]	R. Parodi, A. Dacc?á, G. Gemme, R. Musenich, S. Pittaluga, and V. Buscaglia, “RF Superconductivity in Genoa”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A23, pp. 218-223. 
[n]	P. Emma and R. Brinkmann, “Emittance Dilution through Coherent Energy Spread Generation in Bending Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5V030, pp. 1679-1681. 
[n]	M. U. Urbaniak, Y. Balkova, S. K. Kowalski, S. Pu, and K. W. W??jcik, “Development of New Beam Position Detectors for the NA61/SHINE Experiment”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 84-87. doi:10.18429/JACoW-IBIC2022-MOP22
[n]	T. Aoki et al., “Generation and Application of High Quality Photoelectron Beam at  Waseda University”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B15, pp. 1654-1656. 
[n]	M. E. Couprie et al., “Possible Microstructure in the Super-ACO FEL Pulse”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4B13, pp. 735-737. 
[n]	B. List, L. Hagge, and N. Walker, “Change Management at the International Linear Collider ILC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3835-3837. doi:10.18429/JACoW-IPAC2016-THPOR026
[n]	A. P. Shishlo et al., “Self-Consistent Electron-Cloud Simulation for Long Proton Bunches”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPB010, pp. 722-724. 
[n]	J. E. Spencer and B. Zotter, “Optics Effects & Optinons for TeV Colliders - II”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 481-484. 
[n]	T. Maruta et al., “Recent Progress of Beam Commissioning at J-PARC Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP094, pp. 646-648. 
[n]	D. C. Plostinar, C. R. Prior, and G. H. Rees, “Conceptual Design of a New 800 MeV H- Linac for ISIS Megawatt Developments”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC041, pp. 2100-2102. 
[n]	E.-S. Kim et al., “Recent Experiment Results on Fast Ion Instability at 2.5 GeV PLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPB005, pp. 466-468. 
[n]	S. M. Pattalwar, R. Bate, R. K. Buckley, B. D. Fell, A. R. Goulden, and P. A. McIntosh, “SRF Cryomodule and Cryogenics Developments for the New Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE048, pp. 2251-2253. 
[n]	J. P. Sikora, J. R. Calvey, and J. A. Crittenden, “Cross-Calibration of Three Electron Cloud Density Detectors at CesrTA”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper THCXB1, pp. 722-726. 
[n]	R. R. Lindberg and A. Blednykh, “Modeling of Impedance Effects for the APS-MBA Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1825-1827. doi:10.18429/JACoW-IPAC2015-TUPJE078

For LaTeX

Use Complete Form

For BibTeX

References

Back to search