Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. A. Conway et al., “Frequency Manipulation of Half-Wave Resonators During Fabrication and Processing”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 710-712. doi:10.18429/JACoW-NAPAC2016-WEPOA11
[n] E. S. Kotov, A. M. Batrakov, G. A. Fatkin, A. V. Pavlenko, K. S. Shtro, and M. Yu. Vasilyev, “VME Based Digitizers for Waveform Monitoring System of Linear Induction Accelerator LIA-20”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 721-723. doi:10.18429/JACoW-RUPAC2016-THPSC081
[n] P. I. Nemytov, Yu. I. Golubenko, N. K. Kuksanov, R. A. Salimov, S. N. Fadeev, and M. E. Veis, “HIGH POWER TRANSISTORS FREQUENCY CONVERTER FOR SUPPLY UP TO 500 KW DC ELECTRON ACCELERATORS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLO03, pp. XX-XX.
[n] D. Bloess et al., “Manufacturing and Testing of the First Four Superconducting Nb Cavities for LEP”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G06, pp. XX-XX.
[n] L. D. Amorim, L. O. Silva, J. Vieira, and P. Muggli, “Numerical modeling of the E-209 self-modulation experiment at SLAC - FACET”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1531-1533. doi:10.18429/JACoW-IPAC2014-TUPME076
[n] S. Posen et al., “Nb?Sn at Fermilab: Exploring Performance”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 818-822. doi:10.18429/JACoW-SRF2019-THFUB1
[n] A. Simonin, L. Christin, L. Doceul, F. Faisse, F. Villecroze, and H. de Esch, “Enhanced High-voltage Holding under Vacuum by Field Induced Adsorption of Gas on Metal Surfaces”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS004, pp. 1524-1526.
[n] H. P. Marques, G. Debut, and M. Hahn, “Photodesorption Measurements at ESRF D31”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS002, pp. 1518-1520.
[n] S. Dawson, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “Storage Ring Tune Measurements using High-speed Metal-semiconductor-metal Photodetector”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB84, pp. 537-539.
[n] S. H. Mirza, B. Dursun, H. T. Duhme, H. Schlarb, S. Pfeiffer, and S. Jablonski, “Lattice-based simulations for the fast orbit feedback system of PETRA IV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3989-3991. doi:10.18429/JACoW-IPAC2023-THPA022
[n] G. Delogu, C. Desgranges, M. Fumelli, and A. Simonin, “The DRIFT Source : A Negative Ion Source Module for DC Multi-Amperes Ion Beams”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUO03B, pp. 293-295.
[n] J. Y. Tang and J. C. Nugent, “Recent Results from MICE on Multiple Coulomb Scattering and Energy Loss”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 267-269. doi:10.18429/JACoW-LINAC2018-MOPO127
[n] D. J. Peake, M. J. Boland, G. LeBlanc, and R. P. Rassool, “Growth/Damp Measurements and Bunch-by-Bunch Diagnostics on the Australian Synchrotron Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP066, pp. 4105-4107.
[n] N. K. Kuksanov et al., “High Power ELV Accelerators for Industries Application”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHZ02, pp. 313-315.
[n] C. S. Hopper and J. R. Delayen, “Higher Order Mode Damping in Superconducting Spoke Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2669-2671. doi:10.18429/JACoW-IPAC2014-WEPRI076
[n] M. J. Boland, Y. E. Tan, D. J. Peake, R. P. Rassool, and K. P. Wootton, “Operation and Storage Ring Calibration with the Transverse Bunch-by-Bunch Feedback System at the Australian Synchrotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC049, pp. 2121-2123.
[n] V. K. B. Olsen, E. Adli, L. D. Amorim, P. Muggli, and J. Vieira, “Loading of a Plasma-Wakefield Accelerator Section Driven by a Self-Modulated Proton Bunch”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2551-2554. doi:10.18429/JACoW-IPAC2015-WEPWA026
[n] P. N. Ostroumov et al., “= 0.285 Half-Wave Resonator for FRIB”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO026, pp. 132-134.
[n] C. L. Morris, “Muon Radiography”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FOAB008, unpublished.
[n] C. D. Long, W. Blokland, D. J. Murphy, J. Pogge, J. D. Purcell, and M. Sundaram, “SNS Diagnostics Timing Integration”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP048, pp. 3001-3003.
[n] N. Y. Joly et al., “New Tunable DUV Light Source for Seeding Free-electron Lasers”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPB16, pp. 38-40.
[n] H. Matsumoto et al., “The C-Band (5712-MHz) RF System for e+e- Linear Collider”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10009, pp. XX-XX.
[n] O. I. Meshkov, S. M. Gurov, V. V. Smaluk, and X. Yang, “Application of the Optical Diagnostics during the Commissioning of the Booster of NSLS-II”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3614-3616. doi:10.18429/JACoW-IPAC2014-THPME152
[n] C. S. Hopper and J. R. Delayen, “Multipacting Analysis of High-velocity Superconducting Spoke Resonators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB026, pp. 68-70.
[n] J. C. Nugent and V. C. Palladino, “The Physics Programme of next MICE Step IV”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1361-1363. doi:10.18429/JACoW-IPAC2014-TUPME010
[n] K.-U. Kasemir and E. Danilova, “Integrating the EPICS IOC Log into the CSS Message Log”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN025, pp. 151-153.
[n] M. Donetti et al., “Particle Beam Characteristics Verification for Patient Treatment at CNAO”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS069, pp. 3586-3588.
[n] C. E. Reece, B. D. Madre, L. R. Doolittle, and J. R. Delayen, “Dealing with a Large Installation of SRF Cavities: Characterizing Limitations and Exploiting Operational Flexibility”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP038, pp. 524-527.
[n] S.-C. Kim, A. Ahn, J. M. Kim, K. R. Kim, C. D. Park, and J. C. Yoon, “Magnet Power Supplies Performance at the PLS-II Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3558-3560. doi:10.18429/JACoW-IPAC2016-THPMW011
[n] G. Eremeev et al., “First results from two Nb3Sn cavities assembled in a CEBAF quarter cryomodule”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 604-607. doi:10.18429/JACoW-LINAC2024-THAA004
[n] B. Vacaliuc et al., “Experiment Automation with a Robot Arm Using the Liquids Reflectometer Instrument at the Spallation Neutron Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC077, pp. 759-762.
[n] N. Biancacci et al., “Impedance Measurements and Simulations on the TCTP and TDI LHC Collimators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 610-613. doi:10.18429/JACoW-IPAC2016-MOPOR010
[n] P. C. Marin and G. Debut, “A Simple Way for Comparing Expected and measured Beam Gas Lifetimes in Electron Storage Rings”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1733-1735.
[n] Y. E. Tan, D. J. Peake, and D. O. Tavares, “Fast Orbit Feedback with Linux PREEMPT_RT”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 630-633. doi:10.18429/JACoW-IBIC2016-WEPG08
[n] D. H. An et al., “The Study Of The Central Region Of Kirams-30 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 397-399.
[n] O. R. Blanco-Garc?¡a et al., “Optics Model and Measurements of the DANE Transfer Lines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3249-3251. doi:10.18429/JACoW-IPAC2018-THPAK020
[n] E. S. Kotov, A. M. Batrakov, G. A. Fatkin, A. V. Pavlenko, K. S. Shtro, and M. Yu. Vasilyev, “VME Based Digitizers for Waveform Monitoring System of Linear Induction Accelerator (LIA-20)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1291-1293. doi:10.18429/JACoW-ICALEPCS2017-THMPL09
[n] R. T. Dowd, M. J. Boland, G. LeBlanc, D. J. Peake, and Y. E. Tan, “Impedance Effects in the Australian Synchrotron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD026, pp. 1979-1981.
[n] H. Milcent, X. Genillon, M. Gonzalez-Berges, and A. Voitier, “Supervision Application for the New Power Supply of the CERN PS (POPS)”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN025, pp. 756-758.
[n] T. G. Lucas, P. J. Giansiracusa, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “An Optical Intra-Bunch Instability Monitor for Short Electron Bunches”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 161-164. doi:10.18429/JACoW-IBIC2015-MOPB049
[n] H. S. Suh et al., “Design of Switching Magnet for 20-MeV Beamlines at PEFP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT017, pp. 1575-1577.
[n] A. Voitier, P. Golonka, and M. Gonzalez-Berges, “Integrating Web-Based User Interface Within Cern's Industrial Control System Infrastructure”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 861-864. doi:10.18429/JACoW-ICALEPCS2015-WEPGF069
[n] W. D. Klotz, “Controlling the ESRF Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 321-324.
[n] C. S. Hopper and J. R. Delayen, “Multipacting Analysis of High-Velocity Superconducting Spoke Resonators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB056, pp. 303-305.
[n] C. S. Narug, J. Bernardini, M. Parise, and D. Passarelli, “Design of Production PIP-II SSR1 Cavities”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 822-824. doi:10.18429/JACoW-LINAC2022-THPOGE13
[n] J. P. Ozelis, “The Jefferson Lab Quality Assurance Program for the SNS Superconducting Linac Accelerator Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG028, pp. 1491-1493.
[n] D. O. Tavares et al., “Development of an Open-Source Hardware Platform for Sirius BPM and Orbit Feedback”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOCB07, pp. 1036-1039.
[n] N. Y. Joly et al., “Seeding of SPARC-FEL with a Tunable Fibre-based Source”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD17, pp. 269-271.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. A. Conway et al., “Frequency Manipulation of Half-Wave Resonators During Fabrication and Processing”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 710-712.
- E. S. Kotov, A. M. Batrakov, G. A. Fatkin, A. V. Pavlenko, K. S. Shtro, and M. Yu. Vasilyev, “VME Based Digitizers for Waveform Monitoring System of Linear Induction Accelerator LIA-20”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 721-723.
- P. I. Nemytov, Yu. I. Golubenko, N. K. Kuksanov, R. A. Salimov, S. N. Fadeev, and M. E. Veis, “HIGH POWER TRANSISTORS FREQUENCY CONVERTER FOR SUPPLY UP TO 500 KW DC ELECTRON ACCELERATORS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THLO03, pp. XX-XX.
- D. Bloess et al., “Manufacturing and Testing of the First Four Superconducting Nb Cavities for LEP”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G06, pp. XX-XX.
- L. D. Amorim, L. O. Silva, J. Vieira, and P. Muggli, “Numerical modeling of the E-209 self-modulation experiment at SLAC - FACET”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1531-1533.
- S. Posen et al., “Nb?Sn at Fermilab: Exploring Performance”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 818-822.
- A. Simonin, L. Christin, L. Doceul, F. Faisse, F. Villecroze, and H. de Esch, “Enhanced High-voltage Holding under Vacuum by Field Induced Adsorption of Gas on Metal Surfaces”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS004, pp. 1524-1526.
- H. P. Marques, G. Debut, and M. Hahn, “Photodesorption Measurements at ESRF D31”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS002, pp. 1518-1520.
- S. Dawson, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “Storage Ring Tune Measurements using High-speed Metal-semiconductor-metal Photodetector”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB84, pp. 537-539.
- S. H. Mirza, B. Dursun, H. T. Duhme, H. Schlarb, S. Pfeiffer, and S. Jablonski, “Lattice-based simulations for the fast orbit feedback system of PETRA IV”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA022, pp. 3989-3991.
- G. Delogu, C. Desgranges, M. Fumelli, and A. Simonin, “The DRIFT Source : A Negative Ion Source Module for DC Multi-Amperes Ion Beams”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUO03B, pp. 293-295.
- J. Y. Tang and J. C. Nugent, “Recent Results from MICE on Multiple Coulomb Scattering and Energy Loss”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 267-269.
- D. J. Peake, M. J. Boland, G. LeBlanc, and R. P. Rassool, “Growth/Damp Measurements and Bunch-by-Bunch Diagnostics on the Australian Synchrotron Storage Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP066, pp. 4105-4107.
- N. K. Kuksanov et al., “High Power ELV Accelerators for Industries Application”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHZ02, pp. 313-315.
- C. S. Hopper and J. R. Delayen, “Higher Order Mode Damping in Superconducting Spoke Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2669-2671.
- M. J. Boland, Y. E. Tan, D. J. Peake, R. P. Rassool, and K. P. Wootton, “Operation and Storage Ring Calibration with the Transverse Bunch-by-Bunch Feedback System at the Australian Synchrotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC049, pp. 2121-2123.
- V. K. B. Olsen, E. Adli, L. D. Amorim, P. Muggli, and J. Vieira, “Loading of a Plasma-Wakefield Accelerator Section Driven by a Self-Modulated Proton Bunch”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2551-2554.
- P. N. Ostroumov et al., “= 0.285 Half-Wave Resonator for FRIB”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO026, pp. 132-134.
- C. L. Morris, “Muon Radiography”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAB008, unpublished.
- C. D. Long, W. Blokland, D. J. Murphy, J. Pogge, J. D. Purcell, and M. Sundaram, “SNS Diagnostics Timing Integration”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP048, pp. 3001-3003.
- N. Y. Joly et al., “New Tunable DUV Light Source for Seeding Free-electron Lasers”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPB16, pp. 38-40.
- H. Matsumoto et al., “The C-Band (5712-MHz) RF System for e+e- Linear Collider”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10009, pp. XX-XX.
- O. I. Meshkov, S. M. Gurov, V. V. Smaluk, and X. Yang, “Application of the Optical Diagnostics during the Commissioning of the Booster of NSLS-II”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3614-3616.
- C. S. Hopper and J. R. Delayen, “Multipacting Analysis of High-velocity Superconducting Spoke Resonators”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB026, pp. 68-70.
- J. C. Nugent and V. C. Palladino, “The Physics Programme of next MICE Step IV”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1361-1363.
- K.-U. Kasemir and E. Danilova, “Integrating the EPICS IOC Log into the CSS Message Log”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN025, pp. 151-153.
- M. Donetti et al., “Particle Beam Characteristics Verification for Patient Treatment at CNAO”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS069, pp. 3586-3588.
- C. E. Reece, B. D. Madre, L. R. Doolittle, and J. R. Delayen, “Dealing with a Large Installation of SRF Cavities: Characterizing Limitations and Exploiting Operational Flexibility”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP038, pp. 524-527.
- S.-C. Kim, A. Ahn, J. M. Kim, K. R. Kim, C. D. Park, and J. C. Yoon, “Magnet Power Supplies Performance at the PLS-II Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3558-3560.
- G. Eremeev et al., “First results from two Nb3Sn cavities assembled in a CEBAF quarter cryomodule”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 604-607.
- B. Vacaliuc et al., “Experiment Automation with a Robot Arm Using the Liquids Reflectometer Instrument at the Spallation Neutron Source”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC077, pp. 759-762.
- N. Biancacci et al., “Impedance Measurements and Simulations on the TCTP and TDI LHC Collimators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 610-613.
- P. C. Marin and G. Debut, “A Simple Way for Comparing Expected and measured Beam Gas Lifetimes in Electron Storage Rings”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1733-1735.
- Y. E. Tan, D. J. Peake, and D. O. Tavares, “Fast Orbit Feedback with Linux PREEMPT_RT”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 630-633.
- D. H. An et al., “The Study Of The Central Region Of Kirams-30 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 397-399.
- O. R. Blanco-Garc?¡a et al., “Optics Model and Measurements of the DANE Transfer Lines”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3249-3251.
- E. S. Kotov, A. M. Batrakov, G. A. Fatkin, A. V. Pavlenko, K. S. Shtro, and M. Yu. Vasilyev, “VME Based Digitizers for Waveform Monitoring System of Linear Induction Accelerator (LIA-20)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1291-1293.
- R. T. Dowd, M. J. Boland, G. LeBlanc, D. J. Peake, and Y. E. Tan, “Impedance Effects in the Australian Synchrotron Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD026, pp. 1979-1981.
- H. Milcent, X. Genillon, M. Gonzalez-Berges, and A. Voitier, “Supervision Application for the New Power Supply of the CERN PS (POPS)”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKN025, pp. 756-758.
- T. G. Lucas, P. J. Giansiracusa, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “An Optical Intra-Bunch Instability Monitor for Short Electron Bunches”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 161-164.
- H. S. Suh et al., “Design of Switching Magnet for 20-MeV Beamlines at PEFP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT017, pp. 1575-1577.
- A. Voitier, P. Golonka, and M. Gonzalez-Berges, “Integrating Web-Based User Interface Within Cern's Industrial Control System Infrastructure”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 861-864.
- W. D. Klotz, “Controlling the ESRF Accelerators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 321-324.
- C. S. Hopper and J. R. Delayen, “Multipacting Analysis of High-Velocity Superconducting Spoke Resonators”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB056, pp. 303-305.
- C. S. Narug, J. Bernardini, M. Parise, and D. Passarelli, “Design of Production PIP-II SSR1 Cavities”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 822-824.
- J. P. Ozelis, “The Jefferson Lab Quality Assurance Program for the SNS Superconducting Linac Accelerator Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG028, pp. 1491-1493.
- D. O. Tavares et al., “Development of an Open-Source Hardware Platform for Sirius BPM and Orbit Feedback”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper WECOCB07, pp. 1036-1039.
- N. Y. Joly et al., “Seeding of SPARC-FEL with a Tunable Fibre-based Source”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD17, pp. 269-271.
Back to search