Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. W. Poole, “A Review of Proposed New European Synchrotron Light Sources”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 99-105.
[n] J. Kallestrup and X. Gu, “Possible Application of Round-to-Flat Hadron Beam Creation Using 3rd Order Coupling Resonances for the Electron-Ion Collider”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 99-102. doi:10.18429/JACoW-IPAC2021-MOPAB019
[n] O. A. Tanaka, T. Miyajima, N. Nakamura, and T. Tanikawa, “Injector Design Towards ERL-Based EUV-FEL for Lithography”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2299-2302. doi:10.18429/JACoW-IPAC2022-WEPOMS025
[n] S. Brooks and D. Trbojevic, “Optimisation of a permanent magnet multi-energy FFA arc for the CEBAF energy upgrade”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1053-1056. doi:10.18429/JACoW-IPAC2024-TUPC22
[n] O. A. Tanaka, N. Higashi, and T. Miyajima, “Injector Optimization for the IR-FEL Operation at the Compact ERL at KEK”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4531-4534. doi:10.18429/JACoW-IPAC2021-FRXB07
[n] B. C. Brown, D. Capista, I. Kourbanis, N. V. Mokhov, and V. Sidorov, “Collimation System for the Fermilab Booster to Main Injector Transfer Line”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS011, pp. 1673-1675.
[n] J. Kallestrup and M. Aiba, “Improvements to the SLS Booster Synchrotron Performance Towards SLS 2.0”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 103-106. doi:10.18429/JACoW-IPAC2021-MOPAB020
[n] V. Rajesh, J. Edelen, and J. Einstein-Curtis, “An FPGA-based autoencoder model for real-time RF signal denoising for industrial accelerators”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 928-933. doi:10.18429/JACoW-ICALEPCS2025-WEMG006
[n] Y. Sasaki et al., “An optimization of the ILC E-driven positron source with the TPE algorithm”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1369-1371. doi:10.18429/JACoW-IPAC2025-TUPM091
[n] C. P. Bailey, F. Goldie, B. Leigh, and N. Marks, “Harmonic Measurement and Adjustment of Diamond Quadrupoles”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS066, pp. 2532-2534.
[n] H.-C. Chao, R. Fielder, I. Martin, and B. Singh, “Updates to Diamond-II storage ring error specifications and commissioning procedures”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 422-425. doi:10.18429/JACoW-IPAC2023-MOPA158
[n] D. R. Chow et al., “Simulating Enhanced Focusing Effects of Ion Motion in Adiabatic Plasmas”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1798-1801. doi:10.18429/JACoW-IPAC2022-WEPOST045
[n] W. Lin, “Maintaining optimal beam brightness and luminosity using machine learning”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 79-84. doi:10.18429/JACoW-HIAT2025-TUX03
[n] J. Qiang, “An energy recovery ion linear accelerator”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper TUP20, unpublished.
[n] T. D'Ottavio, P. S. Dyer, J. Piacentino, and M. R. Tomko, “Experience Using NuPIC to Detect Anomalies in Controls Data”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1619. doi:10.18429/JACoW-ICALEPCS2019-THCPL07
[n] J.-W. Kim, “Study on high-current beam extraction methods of a q/A=1/2 K100 compact cyclotron for multi-disciplinary utilization”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper WEC01, unpublished.
[n] W. Lu et al., “Nonlinear Theory in the Blowout Regime for Both Particle Beam and Laser Drivers”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPAE040, unpublished.
[n] K. Yoo et al., “Production and charge breeding for post-acceleration of the first RI beam from RAON ISOL facility”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper WEX03, unpublished.
[n] M. Fukuda, Y. Enomoto, Y. Morikawa, and M. Sato, “Beam tracking simulation of the capture LINAC for the ILC e-driven positron source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 453-455. doi:10.18429/JACoW-IPAC2025-MOPM058
[n] F. S. Tsung et al., “Particle-in-Cell Simulation of LWFA Using 50 fs Pulses in Guided and Unguided Plasmas”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPAE038, unpublished.
[n] V. Rajesh, J. Edelen, and J. Einstein-Curtis, “A self-supervied transformer for RF cavity signal denoising”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP054, unpublished.
[n] M. Xiao, R. Ainsworth, K. J. Hazelwood, and M.-J. Yang, “Linear Modelling and Lattice Correction from Betatron Phase Measurements at the Fermilab Recycler NOvA Ring”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 534-537. doi:10.18429/JACoW-HB2023-THBP30
[n] H.-C. Chao, I. Martin, and R. Fielder, “Comparison of numerical methods to determine quadrupole centres for beam based alignment”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2017, unpublished.
[n] J. P. Edelen, N. M. Cook, K. A. Brown, and P. S. Dyer, “Optimal Control for Rapid Switching of Beam Energies for the ATR Line at BNL”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 790. doi:10.18429/JACoW-ICALEPCS2019-TUCPL07
[n] I. A. Zvonarev, D. Philippov, and L. M. Sevryukova, “Superconducting RF Cavity on the Base of Nb/Cu for the Accelerator SVAAP”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR001, pp. XX-XX.
[n] M. J. Grabski, E. Al-Dmour, and S. M. Scolari, “Vacuum System Performance of the 3 GeV Electron Storage Ring at MAX IV Laboratory”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2836-2838. doi:10.18429/JACoW-IPAC2022-THPOTK034
[n] L. Russo, A. Amodio, E. Norum, and J. Weber, “Open source event timing system at ALS-U”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1073-1079. doi:10.18429/JACoW-ICALEPCS2025-WEPD018
[n] S. Wilkes, A. Morgan, M. Warren, G. Karras, and I. Martin, “Investigations into operating Pulse Picking by Resonant Excitation (PPRE) in the vertical plane”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1071-1074. doi:10.18429/JACoW-IPAC2023-MOPM037
[n] A. Stolz, “FRIB one year user operation”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUXD1, unpublished.
[n] H. Imao, “A charge stripper ring for RIKEN RI Beam Factory”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 298-303. doi:10.18429/JACoW-HIAT2025-FRX01
[n] A. Bungau and R. J. Barlow, “Large Simulation of High Order Short Range Wakefields”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH123, pp. 2209-2211.
[n] S. Twum et al., “Leveraging software simulators in SKA Dish LMC development and testing”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 68-72. doi:10.18429/JACoW-ICALEPCS2025-MOBR004
[n] J. Beinortait et al., “Progress Towards High-Repetition-Rate Plasma Wakefield Acceleration at FLASHForward”, presented at the IPAC'26, Deauville, France, May 2026, paper WEO3T04, unpublished.
[n] G. Favia et al., “SPS injection kicker system: 2023 operational experience and upgrade proposals for high-luminosity LHC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1088-1091. doi:10.18429/JACoW-IPAC2024-TUPC38
[n] T. Egenolf and O. Boine-Frankenheim, “Towards integrated diagnostics for multi-stage dielectric laser acceleration: a conceptual study”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3017, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- M. W. Poole, “A Review of Proposed New European Synchrotron Light Sources”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 99-105.
- J. Kallestrup and X. Gu, “Possible Application of Round-to-Flat Hadron Beam Creation Using 3rd Order Coupling Resonances for the Electron-Ion Collider”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 99-102.
- O. A. Tanaka, T. Miyajima, N. Nakamura, and T. Tanikawa, “Injector Design Towards ERL-Based EUV-FEL for Lithography”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2299-2302.
- S. Brooks and D. Trbojevic, “Optimisation of a permanent magnet multi-energy FFA arc for the CEBAF energy upgrade”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC22, pp. 1053-1056.
- O. A. Tanaka, N. Higashi, and T. Miyajima, “Injector Optimization for the IR-FEL Operation at the Compact ERL at KEK”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4531-4534.
- B. C. Brown, D. Capista, I. Kourbanis, N. V. Mokhov, and V. Sidorov, “Collimation System for the Fermilab Booster to Main Injector Transfer Line”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS011, pp. 1673-1675.
- J. Kallestrup and M. Aiba, “Improvements to the SLS Booster Synchrotron Performance Towards SLS 2.0”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 103-106.
- V. Rajesh, J. Edelen, and J. Einstein-Curtis, “An FPGA-based autoencoder model for real-time RF signal denoising for industrial accelerators”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 928-933.
- Y. Sasaki et al., “An optimization of the ILC E-driven positron source with the TPE algorithm”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM091, pp. 1369-1371.
- C. P. Bailey, F. Goldie, B. Leigh, and N. Marks, “Harmonic Measurement and Adjustment of Diamond Quadrupoles”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS066, pp. 2532-2534.
- H.-C. Chao, R. Fielder, I. Martin, and B. Singh, “Updates to Diamond-II storage ring error specifications and commissioning procedures”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA158, pp. 422-425.
- D. R. Chow et al., “Simulating Enhanced Focusing Effects of Ion Motion in Adiabatic Plasmas”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1798-1801.
- W. Lin, “Maintaining optimal beam brightness and luminosity using machine learning”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUX03, pp. 79-84.
- J. Qiang, “An energy recovery ion linear accelerator”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUP20, unpublished.
- T. D'Ottavio, P. S. Dyer, J. Piacentino, and M. R. Tomko, “Experience Using NuPIC to Detect Anomalies in Controls Data”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1619.
- J.-W. Kim, “Study on high-current beam extraction methods of a q/A=1/2 K100 compact cyclotron for multi-disciplinary utilization”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper WEC01, unpublished.
- W. Lu et al., “Nonlinear Theory in the Blowout Regime for Both Particle Beam and Laser Drivers”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE040, unpublished.
- K. Yoo et al., “Production and charge breeding for post-acceleration of the first RI beam from RAON ISOL facility”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper WEX03, unpublished.
- M. Fukuda, Y. Enomoto, Y. Morikawa, and M. Sato, “Beam tracking simulation of the capture LINAC for the ILC e-driven positron source”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM058, pp. 453-455.
- F. S. Tsung et al., “Particle-in-Cell Simulation of LWFA Using 50 fs Pulses in Guided and Unguided Plasmas”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE038, unpublished.
- V. Rajesh, J. Edelen, and J. Einstein-Curtis, “A self-supervied transformer for RF cavity signal denoising”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP054, unpublished.
- M. Xiao, R. Ainsworth, K. J. Hazelwood, and M.-J. Yang, “Linear Modelling and Lattice Correction from Betatron Phase Measurements at the Fermilab Recycler NOvA Ring”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP30, pp. 534-537.
- H.-C. Chao, I. Martin, and R. Fielder, “Comparison of numerical methods to determine quadrupole centres for beam based alignment”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2017, this conference.
- J. P. Edelen, N. M. Cook, K. A. Brown, and P. S. Dyer, “Optimal Control for Rapid Switching of Beam Energies for the ATR Line at BNL”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 790.
- I. A. Zvonarev, D. Philippov, and L. M. Sevryukova, “Superconducting RF Cavity on the Base of Nb/Cu for the Accelerator SVAAP”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR001, pp. XX-XX.
- M. J. Grabski, E. Al-Dmour, and S. M. Scolari, “Vacuum System Performance of the 3 GeV Electron Storage Ring at MAX IV Laboratory”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2836-2838.
- L. Russo, A. Amodio, E. Norum, and J. Weber, “Open source event timing system at ALS-U”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1073-1079.
- S. Wilkes, A. Morgan, M. Warren, G. Karras, and I. Martin, “Investigations into operating Pulse Picking by Resonant Excitation (PPRE) in the vertical plane”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM037, pp. 1071-1074.
- A. Stolz, “FRIB one year user operation”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUXD1, unpublished.
- H. Imao, “A charge stripper ring for RIKEN RI Beam Factory”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper FRX01, pp. 298-303.
- A. Bungau and R. J. Barlow, “Large Simulation of High Order Short Range Wakefields”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH123, pp. 2209-2211.
- S. Twum et al., “Leveraging software simulators in SKA Dish LMC development and testing”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 68-72.
- J. Beinortait et al., “Progress Towards High-Repetition-Rate Plasma Wakefield Acceleration at FLASHForward”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEO3T04, this conference.
- G. Favia et al., “SPS injection kicker system: 2023 operational experience and upgrade proposals for high-luminosity LHC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC38, pp. 1088-1091.
- T. Egenolf and O. Boine-Frankenheim, “Towards integrated diagnostics for multi-stage dielectric laser acceleration: a conceptual study”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3017, this conference.
Back to search