Favourites
For Word
[n] C. Prados and T. Fleck, “FEC in Deterministic Control Systems over Gigabit Ethernet”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL011, pp. 147-149.
[n] D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 319-322. doi:10.18429/JACoW-RUPAC2018-WEPSB17
[n] C. A. Preissner et al., “Earth, Wind, and Fire: The New Fast Scanning Velociprobe”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 112-115. doi:10.18429/JACoW-MEDSI2016-TUAA02
[n] M. S. Zisman and J. C. Gallardo, “A Possible Hybrid Cooling Channel for a Neutrino Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE074, pp. 3515-3517.
[n] G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 803-806.
[n] R. Corsini, W. Farabolini, P. Korysko, A. Malyzhenkov, V. Rieker, and K. N. Sjobak, “Status of the CLEAR User Facility at CERN and its Experiments”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 753-757. doi:10.18429/JACoW-LINAC2022-THPOPA05
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
[n] M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52.
[n] G. Heidenreich, L. Schulz, and P. Wiegand, “Vacuum System for the Swiss Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP30C, pp. 2196-2198.
[n] S. Veitzer, K. Sonnad, P. Lebrun, and P. Stoltz, “Modeling Electron Cloud Buildup and Microwave Diagnostics using VORPAL”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MOD04, pp. 162-166.
[n] V. Sajaev and C. A. Preissner, “Determination of the Ground Motion Orbit Amplification Factors Dependence on the Frequency for the APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1272-1275. doi:10.18429/JACoW-IPAC2018-TUPMF012
[n] A. Schwinn et al., “FESA3 ÔÇô The New Front-End Software Framework at CERN and the FAIR Facility”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOAA03, pp. 22-26.
[n] K. Polak, J.-C. Gayde, and M. Sulc, “3D polarisation of a structured laser beam and prospects for its application to charged particle acceleration”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1443-1445. doi:10.18429/JACoW-IPAC2023-TUPA047
[n] V. N. Litvinenko, B. Burnham, N. Hower, P. Morcombe, and Y. Wu, “Duke Storage Ring Tune Measurements System using Razor Blade and Photomultiplier”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ06, pp. 2461-2463.
[n] J. N. Weaver and H. A. Hogg, “Improving the Phase Stability of the SLAC rf Driveline Network for SLC Operation”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2234-2237.
[n] P. Proudlock and H. W. Isch, “The Power Converters for the RF Klystrons of LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1209-1212.
[n] P. Grand, “Vacuum Requirements for Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
[n] G. Ascenção, M. Alves, L. Liu, and X. Resende, “Study of insertion devices effects in SIRIUS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1184-1187. doi:10.18429/JACoW-IPAC2023-MOPM088
[n] R. L. Geng et al., “RD on the Niobium-Copper Superconducting Cavity at Peking University”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOP013, pp. 70-73.
[n] A. Carroll et al., “Overview of Recent Focussing Horns for BNL Neutrino Program”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1731-1734.
[n] J. L. Baelde et al., “A New Unit Access Control for GANIL and SPIRAL 2”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper G-01, pp. 357-359.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Prados and T. Fleck, “FEC in Deterministic Control Systems over Gigabit Ethernet”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL011, pp. 147-149.
- D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 319-322.
- C. A. Preissner et al., “Earth, Wind, and Fire: The New Fast Scanning Velociprobe”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 112-115.
- M. S. Zisman and J. C. Gallardo, “A Possible Hybrid Cooling Channel for a Neutrino Factory”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE074, pp. 3515-3517.
- G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 803-806.
- R. Corsini, W. Farabolini, P. Korysko, A. Malyzhenkov, V. Rieker, and K. N. Sjobak, “Status of the CLEAR User Facility at CERN and its Experiments”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 753-757.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
- M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52.
- G. Heidenreich, L. Schulz, and P. Wiegand, “Vacuum System for the Swiss Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP30C, pp. 2196-2198.
- S. Veitzer, K. Sonnad, P. Lebrun, and P. Stoltz, “Modeling Electron Cloud Buildup and Microwave Diagnostics using VORPAL”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MOD04, pp. 162-166.
- V. Sajaev and C. A. Preissner, “Determination of the Ground Motion Orbit Amplification Factors Dependence on the Frequency for the APS Upgrade Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1272-1275.
- A. Schwinn et al., “FESA3 ÔÇô The New Front-End Software Framework at CERN and the FAIR Facility”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WECOAA03, pp. 22-26.
- K. Polak, J.-C. Gayde, and M. Sulc, “3D polarisation of a structured laser beam and prospects for its application to charged particle acceleration”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA047, pp. 1443-1445.
- V. N. Litvinenko, B. Burnham, N. Hower, P. Morcombe, and Y. Wu, “Duke Storage Ring Tune Measurements System using Razor Blade and Photomultiplier”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ06, pp. 2461-2463.
- J. N. Weaver and H. A. Hogg, “Improving the Phase Stability of the SLAC rf Driveline Network for SLC Operation”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2234-2237.
- P. Proudlock and H. W. Isch, “The Power Converters for the RF Klystrons of LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1209-1212.
- P. Grand, “Vacuum Requirements for Linacs”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
- G. Ascenção, M. Alves, L. Liu, and X. Resende, “Study of insertion devices effects in SIRIUS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM088, pp. 1184-1187.
- R. L. Geng et al., “RD on the Niobium-Copper Superconducting Cavity at Peking University”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOP013, pp. 70-73.
- A. Carroll et al., “Overview of Recent Focussing Horns for BNL Neutrino Program”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1731-1734.
- J. L. Baelde et al., “A New Unit Access Control for GANIL and SPIRAL 2”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper G-01, pp. 357-359.
Back to search