Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Struven, “Wide-Band Cable Systems at SLAC”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2323-2325.
[n] S. Littleton, “Dark current in LCLS-II: source characterization and start-to-end modeling”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS112, unpublished.
[n] F. Chautard and G. S?®n?®cal, “Operation Status of High Intensity Ion Beams at GANIL”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-07, pp. 54-58.
[n] X. H. Xie et al., “A Major Update of Web Based Development Toolkit for Control System of Large-Scale Physics Experiment Device”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 1029-1031. doi:10.18429/JACoW-ICALEPCS2021-FRAR03
[n] F. P?®rez, T. F. G??nzel, and A. Olmos, “BPM Design for the ALBA Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH078, pp. 1190-1192.
[n] S. Assadi, “Overview of Beam Instrumentations for High-Power Operation of the Spallation Neutron Source”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF01, pp. 439-439.
[n] J. Riedel and J. Vincent, “The RF Systems of the MSU K500 and K800 Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper H05, pp. 315-316.
[n] S. Littleton, “Analysis of Linear Induction Accelerator Physics with Field-Adapted Coordinate Transformations”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL069, unpublished.
[n] B. C. Anderson, “Master Timing System for CEA Colliding Beam Project”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 422-424.
[n] E. R. Gray, S. Nath, and T. P. Wangler, “Simulated Performance of the Superconducting Section of the APT Linac Under Various Fault and Error Conditions”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W018, pp. 1153-1155.
[n] A. P. Zhukov and S. Assadi, “SNS BLM System Overview: Detectors, Measurements, Simulations”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF04, pp. 453-453.
[n] S. Greenwald, “Higher Order Modes Power Loss in the Vertical Separators at CESR”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P040, pp. 3699-3701.
[n] N. Shafqat and C. Pasotti, “Elettra cavity HOM and dedicated dampers design”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7007, unpublished.
[n] Z. Greenwald, S. Greenwald, and D. H. Rice, “REC Quadrupole's Beam Pipe Temperature Control”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P042, pp. 3705-3707.
[n] A. Galdi et al., “PHOtocathode Epitaxy and Beam Experiments laboratory at Cornell: current status and future work”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 630-633. doi:10.18429/JACoW-IPAC2024-MOPR78
[n] O. Kamalou, F. Chautard, and A. Savalle, “Stable and Exotic Beams Produced at GANIL”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 398-400. doi:10.18429/JACoW-Cyclotrons2016-FRB02
[n] P. A. Zavodszky et al., “Design, Construction and Commissioning of the SuSI ECR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXAB03, pp. 3766-3770.
[n] I. Bazarov and G. Hoffstaetter, “Multi-pass Beam-breakup: Theory and Calculation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT153, pp. 2197-2199.
[n] S. Littleton, D. Dowell, F. Zhou, and A. Fisher, “Dark current in the LCLS Injector: characterization and mitigation strategies”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2148-2150. doi:10.18429/JACoW-IPAC2024-WEPC75
[n] L. Perrot, P. Blache, and S. Rousselot, “The DESIR Facility at GANIL-SPIRAL2: The Transfer Beam Lines”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 179-183. doi:10.18429/JACoW-HB2016-MOPL002
[n] O. Kamalou et al., “GANIL Operation Status and New Range of Post-Accelerated Exotic Beams”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA1C02, pp. 20-22.
[n] M. Olivo, U. Rohrer, and E. Steiner, “An Electrostatic Beam Splitter for the SIN 590 MeV Proton Beam Line”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3094-3097.
[n] W. Andreazza et al., “Design of New Beam Instrumentation for the ISOLDE Isotope Separator at CERN”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 205-207. doi:10.18429/JACoW-MEDSI2018-WEPH03
[n] J. L. Baelde et al., “The SISSI Facility at GANIL”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP050G, pp. 2403-2405.
[n] D. Reagan and T. E. Hostetler, “An Electron Beam Spectrum Monitor using Synchrotron Light”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3297-3300.
[n] P. Tenenbaum, R. Brinkmann, and V. Tsakanov, “Beam-based Alignment of the TESLA Main Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI054, pp. 515-517.
[n] E. Kikutani, T. Kasuga, L. Ma, Y. Minagawa, T. Obina, and M. Tobiyama, “Development of Bunch Feedback Systems for KEKB”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1613-1616.
[n] A. Fabris, C. Pasotti, and M. Svandrlik, “Coupled Bunch Instability Calculations for the ANKA Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP04E, pp. 1011-1013.
[n] A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed ISABELLE" Dipoles"”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1242-1245.
[n] R. Nietuby et al., “Status of PolFEL project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFAV003, pp..
[n] M. Pezzetti and Ph. Gayet, “CERN Cryogenic Controls Today and Tomorrow”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 997-1004. doi:10.18429/JACoW-ICALEPCS2021-FRAL03
[n] A. S. Alexandrova and C. P. Welsch, “Beam Characterization Using Laser Self-Mixing”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 516-520. doi:10.18429/JACoW-IBIC2015-TUPB070
[n] T. F. Günzel, “Longitudinal Beam Stability and Related Effects at the ALBA Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS064, pp. 748-750.
[n] P. Craievich, A. Fabris, C. Pasotti, and M. Svandrlik, “RF System for the ELETTRA Booster Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B12, pp. 1957-1959.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Struven, “Wide-Band Cable Systems at SLAC”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2323-2325.
- S. Littleton, “Dark current in LCLS-II: source characterization and start-to-end modeling”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS112, unpublished.
- F. Chautard and G. S?®n?®cal, “Operation Status of High Intensity Ion Beams at GANIL”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-07, pp. 54-58.
- X. H. Xie et al., “A Major Update of Web Based Development Toolkit for Control System of Large-Scale Physics Experiment Device”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 1029-1031.
- F. P?®rez, T. F. G??nzel, and A. Olmos, “BPM Design for the ALBA Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH078, pp. 1190-1192.
- S. Assadi, “Overview of Beam Instrumentations for High-Power Operation of the Spallation Neutron Source”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF01, pp. 439-439.
- J. Riedel and J. Vincent, “The RF Systems of the MSU K500 and K800 Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper H05, pp. 315-316.
- S. Littleton, “Analysis of Linear Induction Accelerator Physics with Field-Adapted Coordinate Transformations”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL069, unpublished.
- B. C. Anderson, “Master Timing System for CEA Colliding Beam Project”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 422-424.
- E. R. Gray, S. Nath, and T. P. Wangler, “Simulated Performance of the Superconducting Section of the APT Linac Under Various Fault and Error Conditions”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W018, pp. 1153-1155.
- A. P. Zhukov and S. Assadi, “SNS BLM System Overview: Detectors, Measurements, Simulations”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF04, pp. 453-453.
- S. Greenwald, “Higher Order Modes Power Loss in the Vertical Separators at CESR”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P040, pp. 3699-3701.
- N. Shafqat and C. Pasotti, “Elettra cavity HOM and dedicated dampers design”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7007, this conference.
- Z. Greenwald, S. Greenwald, and D. H. Rice, “REC Quadrupole's Beam Pipe Temperature Control”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P042, pp. 3705-3707.
- A. Galdi et al., “PHOtocathode Epitaxy and Beam Experiments laboratory at Cornell: current status and future work”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR78, pp. 630-633.
- O. Kamalou, F. Chautard, and A. Savalle, “Stable and Exotic Beams Produced at GANIL”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 398-400.
- P. A. Zavodszky et al., “Design, Construction and Commissioning of the SuSI ECR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRXAB03, pp. 3766-3770.
- I. Bazarov and G. Hoffstaetter, “Multi-pass Beam-breakup: Theory and Calculation”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT153, pp. 2197-2199.
- S. Littleton, D. Dowell, F. Zhou, and A. Fisher, “Dark current in the LCLS Injector: characterization and mitigation strategies”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC75, pp. 2148-2150.
- L. Perrot, P. Blache, and S. Rousselot, “The DESIR Facility at GANIL-SPIRAL2: The Transfer Beam Lines”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 179-183.
- O. Kamalou et al., “GANIL Operation Status and New Range of Post-Accelerated Exotic Beams”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOA1C02, pp. 20-22.
- M. Olivo, U. Rohrer, and E. Steiner, “An Electrostatic Beam Splitter for the SIN 590 MeV Proton Beam Line”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3094-3097.
- W. Andreazza et al., “Design of New Beam Instrumentation for the ISOLDE Isotope Separator at CERN”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 205-207.
- J. L. Baelde et al., “The SISSI Facility at GANIL”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP050G, pp. 2403-2405.
- D. Reagan and T. E. Hostetler, “An Electron Beam Spectrum Monitor using Synchrotron Light”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3297-3300.
- P. Tenenbaum, R. Brinkmann, and V. Tsakanov, “Beam-based Alignment of the TESLA Main Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI054, pp. 515-517.
- E. Kikutani, T. Kasuga, L. Ma, Y. Minagawa, T. Obina, and M. Tobiyama, “Development of Bunch Feedback Systems for KEKB”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1613-1616.
- A. Fabris, C. Pasotti, and M. Svandrlik, “Coupled Bunch Instability Calculations for the ANKA Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP04E, pp. 1011-1013.
- A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed ISABELLE" Dipoles"”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1242-1245.
- R. Nietuby et al., “Status of PolFEL project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFAV003, pp..
- M. Pezzetti and Ph. Gayet, “CERN Cryogenic Controls Today and Tomorrow”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 997-1004.
- A. S. Alexandrova and C. P. Welsch, “Beam Characterization Using Laser Self-Mixing”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 516-520.
- T. F. Günzel, “Longitudinal Beam Stability and Related Effects at the ALBA Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS064, pp. 748-750.
- P. Craievich, A. Fabris, C. Pasotti, and M. Svandrlik, “RF System for the ELETTRA Booster Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B12, pp. 1957-1959.
Back to search