Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. R. Bainbridge, N. Krumpa, I. P. S. Martin, B. J. A. Shepherd, and W. Tizzano, “Demonstration of ÔÇÿZEPTOÔÇÖ Permanent Magnet Technology on Diamond Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2370-2373. doi:10.18429/JACoW-IPAC2021-TUPAB365
[n] Y. Ma et al., “Microphonics Investigation of ARIEL e-Linac Cryomodules”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 370-373. doi:10.18429/JACoW-LINAC2018-TUPO020
[n] H. Wan, D. Hei, and Z. Yao, “Design of a compact electron linac for the X-ray based intraoperative radiotherapy”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM011, unpublished.
[n] S. Kurokawa, “The Present Status of the KEKB Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP086G, pp. 448-450.
[n] S. Takeda et al., “Test Accelerator Facility for Linear Colliders”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1841-1844.
[n] J. Hagel and B. Zotter, “One Dimensional Motion in a Thick Sextupole: A Comparison of Tracking Methods with the Exact Solution”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1295-1298.
[n] O. Etisken, F. Antoniou, A. De Santis, C. Milardi, and F. Zimmermann, “Collective Effects Estimates for the Damping Ring Design of the FCC-ee”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2435-2438. doi:10.18429/JACoW-IPAC2022-THPOST003
[n] T. Sugimoto, K. Ishii, S. Iwata, H. Matsumoto, and T. Shibata, “Improvement of Matching Circuit for J-PARC Main Ring Injection Kicker Magnet”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 316-319. doi:10.18429/JACoW-IPAC2022-MOPOPT032
[n] S. Kurashima, “DEVELOPMENT OF THE FLAT-TOP ACCELERATION SYSTEM FOR THE JAERI AVF CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P28, pp. XX-XX.
[n] M. Ivanyan, L. V. Hovakimyan, and A. Sargsyan, “Some Features of Wave Distribution in the Thin-Wall Waveguide”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1641-1643. doi:10.18429/JACoW-IPAC2014-TUPRI037
[n] A. Roy et al., “Status of Superconducting Linac Booster for NSC Pelletron”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A30, pp. 265-268.
[n] J. Wolfenden, N. Kumar, A. Salehilashkajani, C. P. Welsch, and H. D. Zhang, “Gas Jet In-Vivo Dosimetry for Particle Beam Therapy”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4548-4551. doi:10.18429/JACoW-IPAC2021-FRXC05
[n] M. Apollonio, G. Cinque, H. Ghasem, A. N. Jury, I. P. S. Martin, and R. Rambo, “A Single Dipole Source for Broad-Band Soft Photon Beamlines in Diamond-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 261-264. doi:10.18429/JACoW-IPAC2021-MOPAB062
[n] J. Hagel and H. Moshammer, “Analytic Calculation of the Dynamical Aperture for the Two Dimensional Betatron Motion in Storage Rings”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 696-699.
[n] K. W. Reiniger, “Power Supply System for the TRIUMF KAON Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 920-923.
[n] G. Ciovati, A. V. Gurevich, and I. P. Parajuli, “Maximum Performance of Cavities Affected by the High-field Q-slope (HFQS)”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 533-537. doi:10.18429/JACoW-SRF2019-TUP049
[n] H. Junkes et al., “Integrating the FHI-FEL Into the FHI Research Environment - Design and Implementation Aspects”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO30, pp. 562-565.
[n] G. O. Rodrigues, D. Kanjilal, N. Kumar, K. Mal, Y. Mathur, and A. Roy, “Frequency Tuning Effect On The Bremsstrahlung Spectra, Beam Intensity And Shape In An ECR Ion Source”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOOBMH03, pp. 15-19.
[n] O. Etisken, A. K. Ciftci, and Y. Papaphilippou, “Conceptual Design of a Pre-Booster Ring for the FCC e+e- Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 917-920. doi:10.18429/JACoW-IPAC2017-MOPVA029
[n] K. Yamada et al., “Construction of New Injector LINAC at RIBF”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP025, pp. 102-104.
[n] M. Grieser et al., “Status of the REX-ISOLDE Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA30, pp. 1955-1957.
[n] B. K. Sahu et al., “Piezoelectric Actuator Based Phase Locking System for IUAC Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB033, pp. 549-551.
[n] B. Gottschalk, “Medium Energy Proton Accelerator for Therapy”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3063-3064.
[n] J. Hagel and B. Zotter, “A New Approach to Potential Well Bunch Deformation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 488-491.
[n] R. R. Nagimov et al., “Development of Remote Handleable Axially Decoupled Radiation Resistant Vacuum Seal”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1233-1235. doi:10.18429/JACoW-IPAC2019-TUPMP003
[n] G. Dutto et al., “Recent Progress at TRIUMF”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-03, pp. 342-346.
[n] P. Dhakal, G. Ciovati, and G. R. Myneni, “Evaluation of High Performance Large Grain Medium Purity SRF Cavity From KEK”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 415-418. doi:10.18429/JACoW-SRF2019-TUP012
[n] R. Kitamura, N. Kawamura, and T. Shibata, “Ionization of the muonium using the electron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1432-1433. doi:10.18429/JACoW-IPAC2023-TUPA041
For LaTeX
Use Complete Form
For BibTeX
References
- A. R. Bainbridge, N. Krumpa, I. P. S. Martin, B. J. A. Shepherd, and W. Tizzano, “Demonstration of ÔÇÿZEPTOÔÇÖ Permanent Magnet Technology on Diamond Light Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2370-2373.
- Y. Ma et al., “Microphonics Investigation of ARIEL e-Linac Cryomodules”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 370-373.
- H. Wan, D. Hei, and Z. Yao, “Design of a compact electron linac for the X-ray based intraoperative radiotherapy”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM011, this conference.
- S. Kurokawa, “The Present Status of the KEKB Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP086G, pp. 448-450.
- S. Takeda et al., “Test Accelerator Facility for Linear Colliders”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1841-1844.
- J. Hagel and B. Zotter, “One Dimensional Motion in a Thick Sextupole: A Comparison of Tracking Methods with the Exact Solution”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1295-1298.
- O. Etisken, F. Antoniou, A. De Santis, C. Milardi, and F. Zimmermann, “Collective Effects Estimates for the Damping Ring Design of the FCC-ee”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2435-2438.
- T. Sugimoto, K. Ishii, S. Iwata, H. Matsumoto, and T. Shibata, “Improvement of Matching Circuit for J-PARC Main Ring Injection Kicker Magnet”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 316-319.
- S. Kurashima, “DEVELOPMENT OF THE FLAT-TOP ACCELERATION SYSTEM FOR THE JAERI AVF CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P28, pp. XX-XX.
- M. Ivanyan, L. V. Hovakimyan, and A. Sargsyan, “Some Features of Wave Distribution in the Thin-Wall Waveguide”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1641-1643.
- A. Roy et al., “Status of Superconducting Linac Booster for NSC Pelletron”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A30, pp. 265-268.
- J. Wolfenden, N. Kumar, A. Salehilashkajani, C. P. Welsch, and H. D. Zhang, “Gas Jet In-Vivo Dosimetry for Particle Beam Therapy”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4548-4551.
- M. Apollonio, G. Cinque, H. Ghasem, A. N. Jury, I. P. S. Martin, and R. Rambo, “A Single Dipole Source for Broad-Band Soft Photon Beamlines in Diamond-II”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 261-264.
- J. Hagel and H. Moshammer, “Analytic Calculation of the Dynamical Aperture for the Two Dimensional Betatron Motion in Storage Rings”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 696-699.
- K. W. Reiniger, “Power Supply System for the TRIUMF KAON Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 920-923.
- G. Ciovati, A. V. Gurevich, and I. P. Parajuli, “Maximum Performance of Cavities Affected by the High-field Q-slope (HFQS)”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 533-537.
- H. Junkes et al., “Integrating the FHI-FEL Into the FHI Research Environment - Design and Implementation Aspects”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO30, pp. 562-565.
- G. O. Rodrigues, D. Kanjilal, N. Kumar, K. Mal, Y. Mathur, and A. Roy, “Frequency Tuning Effect On The Bremsstrahlung Spectra, Beam Intensity And Shape In An ECR Ion Source”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper MOOBMH03, pp. 15-19.
- O. Etisken, A. K. Ciftci, and Y. Papaphilippou, “Conceptual Design of a Pre-Booster Ring for the FCC e+e- Injector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 917-920.
- K. Yamada et al., “Construction of New Injector LINAC at RIBF”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP025, pp. 102-104.
- M. Grieser et al., “Status of the REX-ISOLDE Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA30, pp. 1955-1957.
- B. K. Sahu et al., “Piezoelectric Actuator Based Phase Locking System for IUAC Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB033, pp. 549-551.
- B. Gottschalk, “Medium Energy Proton Accelerator for Therapy”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3063-3064.
- J. Hagel and B. Zotter, “A New Approach to Potential Well Bunch Deformation”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 488-491.
- R. R. Nagimov et al., “Development of Remote Handleable Axially Decoupled Radiation Resistant Vacuum Seal”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1233-1235.
- G. Dutto et al., “Recent Progress at TRIUMF”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-03, pp. 342-346.
- P. Dhakal, G. Ciovati, and G. R. Myneni, “Evaluation of High Performance Large Grain Medium Purity SRF Cavity From KEK”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 415-418.
- R. Kitamura, N. Kawamura, and T. Shibata, “Ionization of the muonium using the electron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA041, pp. 1432-1433.
Back to search