Favourites
For Word
[n] F. Staufenbiel et al., “Heat Load Studies in Target and Collimator Materials for the ILC Positron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD032, pp. 2576-2578.
[n] P. H. Williams, B. W. J. McNeil, B. L. Militsyn, H. L. Owen, M. W. Poole, and N. Thompson, “PULSE - A High-Repetition-Rate Linac Driver for X-ray FELs”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC035, pp. 148-150.
[n] M. Venturini and A. Dragt, “Computing Transfer Maps from Magnetic Field Data”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP50, pp. 1593-1595.
[n] S. Pfeiffer et al., “Virtual Cavity Probe Generation using Calibrated Forward and Reflected Signals”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 200-202. doi:10.18429/JACoW-IPAC2015-MOPWA040
[n] L. Butkowski, H. Schlarb, and V. Vogel, “Klystron Measurement and Protection System for XFEL on the MTCA.4 Architecture”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA09, pp. 937-939.
[n] M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4912-4915. doi:10.18429/JACoW-IPAC2023-THPM010
[n] T. Sieber et al., “Stand-alone operation of the dual-core cryogenic current comparator for FAIR”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM046, unpublished.
[n] S. Seletskiy et al., “Commissioning of Active Interlock System for NSLS II Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1962-1964. doi:10.18429/JACoW-IPAC2015-TUPMA057
[n] J. A. Martin, “Invited Paper- Recent Advances in Design for Low- and Medium-Energy Heavy Ion Accelerators”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3645-3653.
[n] A. Ushakov, V. S. Kovalenko, G. A. Moortgat-Pick, S. Riemann, and F. Staufenbiel, “Simulations of the ILC Positron Source at Low Energies”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME003, pp. 1562-1564.
[n] H. Okuno et al., “A New Possibility of Low-Z Gas Stripper for High-Power Uranium Beam Acceleration Alternative to C Foil”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2B01, pp. 600-604.
[n] G. Vandoni et al., “Project management structures, processes, and tools for the HL-LHC project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1656-1659. doi:10.18429/JACoW-IPAC2023-TUPA154
[n] V. Tzoganis, A. Jeff, and C. P. Welsch, “Experimental Results of a Gas Jet Based Beam Profile Monitor”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3559-3562. doi:10.18429/JACoW-IPAC2014-THPME134
For LaTeX
Use Complete Form
For BibTeX
References
- F. Staufenbiel et al., “Heat Load Studies in Target and Collimator Materials for the ILC Positron Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD032, pp. 2576-2578.
- P. H. Williams, B. W. J. McNeil, B. L. Militsyn, H. L. Owen, M. W. Poole, and N. Thompson, “PULSE - A High-Repetition-Rate Linac Driver for X-ray FELs”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC035, pp. 148-150.
- M. Venturini and A. Dragt, “Computing Transfer Maps from Magnetic Field Data”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP50, pp. 1593-1595.
- S. Pfeiffer et al., “Virtual Cavity Probe Generation using Calibrated Forward and Reflected Signals”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 200-202.
- L. Butkowski, H. Schlarb, and V. Vogel, “Klystron Measurement and Protection System for XFEL on the MTCA.4 Architecture”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA09, pp. 937-939.
- M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM010, pp. 4912-4915.
- T. Sieber et al., “Stand-alone operation of the dual-core cryogenic current comparator for FAIR”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM046, this conference.
- S. Seletskiy et al., “Commissioning of Active Interlock System for NSLS II Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1962-1964.
- J. A. Martin, “Invited Paper- Recent Advances in Design for Low- and Medium-Energy Heavy Ion Accelerators”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3645-3653.
- A. Ushakov, V. S. Kovalenko, G. A. Moortgat-Pick, S. Riemann, and F. Staufenbiel, “Simulations of the ILC Positron Source at Low Energies”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME003, pp. 1562-1564.
- H. Okuno et al., “A New Possibility of Low-Z Gas Stripper for High-Power Uranium Beam Acceleration Alternative to C Foil”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2B01, pp. 600-604.
- G. Vandoni et al., “Project management structures, processes, and tools for the HL-LHC project”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA154, pp. 1656-1659.
- V. Tzoganis, A. Jeff, and C. P. Welsch, “Experimental Results of a Gas Jet Based Beam Profile Monitor”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3559-3562.
Back to search
