Favourites
For Word
[n] S. A. Smith, C. Haddock, R. Jayakumar, J. Turner, and J. Zbasnik, “Mechanical Analysis of Beam Tube Assemblies for SSC Dipoles During a Quench”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2206-2209.
[n] J. Sebek and C. Limborg, “Theoretical model of longitudinal relaxation oscillations induced by HOMs”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP67, pp. 3107-3109.
[n] R. Li and F. Marhauser, “Analysis of Multibunch Spectrum for an Uneven Bunch Distribution in a Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2058-2061. doi:10.18429/JACoW-IPAC2021-TUPAB257
[n] S. G. Tantawi et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P058, pp. 3192-3194.
[n] P. W. Allison and R. R. Stevens Jr, “The Beam Transport Design for the LAMPF Injector”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper E-7, pp. 364-371.
[n] K. Yu, Q. S. Shu, J. Zbasnik, J. Maddocks, W. Clay, and G. Morales, “Thermal Model and Associated Novel Approach for Synchrotron Radiation Liner with End Cooling”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3891-3894.
[n] D. Li, J. Corlett, and W. Turner, “Temperature Distribution Calculations on Beryllium Windows in RF Cavities for a Muon Collider”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4089, pp. 273-275.
[n] J. Rodnizki et al., “SARAF Phase-I HWR Coupler Cooling Design”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP066, pp. 1073-1076.
[n] O. Mohsen, R. Ainsworth, and N. Eddy, “Waker Experiments at Fermilab Recycler Ring”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 124-127. doi:10.18429/JACoW-NAPAC2022-MOPA33
[n] J. Carson, S. Gourlay, M. J. Lamm, P. M. Mantsch, and A. Riddiford, “Fabrication and Performance of a New High-gradient Trim Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2236-2239.
[n] K. R. Kim et al., “Reliability and Maintenance of PLS Linac Mechanical Systems”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH475, pp. 770-772.
[n] O. Mohsen et al., “Simulations and Experimental Plans for a High-Repetition-Rate Field-Enhanced Conduction-Cooled Superconducting RF Electron Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2113-2116. doi:10.18429/JACoW-IPAC2019-TUPTS083
[n] R. Li and Y. S. Derbenev, “Discussions on the Cancellation Effect on a Curved Orbit”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT019, pp. 1631-1633.
[n] C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Optimizing the sextupole configuration for simultaneous correction of third order resonances at the recycler ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 736-739. doi:10.18429/JACoW-IPAC2024-MOPS16
[n] M. Wake et al., “Magnetic Field Properties of SSC Model Dipole Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 333-336.
[n] J. Barale et al., “Performance of the Bevalac”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1672-1675.
[n] K. Yu, Q. S. Shu, K. K. Leung, and J. Zbasnik, “Effective Stress of the SSC 80 K Synchrotron Radiation Liner in a Quenching Dipole Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2787-2790.
[n] J. Sebek and C. Limborg, “Environmental Effects on RF Cavity Tuning”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH089, pp. 1877-1879.
[n] S. M. Gierman et al., “Operating a Tungsten Dispenser Cathode in Photo-Emission Mode”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP088, pp. 575-576.
[n] K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060.
[n] A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL011, unpublished.
[n] R. Akre, T. Straumann, and K. D. Kotturi, “130-MHz, 16-Bit Four-Channel Digitizer”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB39, pp. 475-477.
[n] R. Akre et al., “LCLS LLRF Upgrades to the SLAC Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS036, pp. 2421-2423.
For LaTeX
Use Complete Form
For BibTeX
References
- S. A. Smith, C. Haddock, R. Jayakumar, J. Turner, and J. Zbasnik, “Mechanical Analysis of Beam Tube Assemblies for SSC Dipoles During a Quench”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2206-2209.
- J. Sebek and C. Limborg, “Theoretical model of longitudinal relaxation oscillations induced by HOMs”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP67, pp. 3107-3109.
- R. Li and F. Marhauser, “Analysis of Multibunch Spectrum for an Uneven Bunch Distribution in a Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2058-2061.
- S. G. Tantawi et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P058, pp. 3192-3194.
- P. W. Allison and R. R. Stevens Jr, “The Beam Transport Design for the LAMPF Injector”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper E-7, pp. 364-371.
- K. Yu, Q. S. Shu, J. Zbasnik, J. Maddocks, W. Clay, and G. Morales, “Thermal Model and Associated Novel Approach for Synchrotron Radiation Liner with End Cooling”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3891-3894.
- D. Li, J. Corlett, and W. Turner, “Temperature Distribution Calculations on Beryllium Windows in RF Cavities for a Muon Collider”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4089, pp. 273-275.
- J. Rodnizki et al., “SARAF Phase-I HWR Coupler Cooling Design”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP066, pp. 1073-1076.
- O. Mohsen, R. Ainsworth, and N. Eddy, “Waker Experiments at Fermilab Recycler Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 124-127.
- J. Carson, S. Gourlay, M. J. Lamm, P. M. Mantsch, and A. Riddiford, “Fabrication and Performance of a New High-gradient Trim Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2236-2239.
- K. R. Kim et al., “Reliability and Maintenance of PLS Linac Mechanical Systems”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH475, pp. 770-772.
- O. Mohsen et al., “Simulations and Experimental Plans for a High-Repetition-Rate Field-Enhanced Conduction-Cooled Superconducting RF Electron Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2113-2116.
- R. Li and Y. S. Derbenev, “Discussions on the Cancellation Effect on a Curved Orbit”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT019, pp. 1631-1633.
- C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Optimizing the sextupole configuration for simultaneous correction of third order resonances at the recycler ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS16, pp. 736-739.
- M. Wake et al., “Magnetic Field Properties of SSC Model Dipole Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 333-336.
- J. Barale et al., “Performance of the Bevalac”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1672-1675.
- K. Yu, Q. S. Shu, K. K. Leung, and J. Zbasnik, “Effective Stress of the SSC 80 K Synchrotron Radiation Liner in a Quenching Dipole Magnet”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2787-2790.
- J. Sebek and C. Limborg, “Environmental Effects on RF Cavity Tuning”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH089, pp. 1877-1879.
- S. M. Gierman et al., “Operating a Tungsten Dispenser Cathode in Photo-Emission Mode”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP088, pp. 575-576.
- K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060.
- A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL011, unpublished.
- R. Akre, T. Straumann, and K. D. Kotturi, “130-MHz, 16-Bit Four-Channel Digitizer”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB39, pp. 475-477.
- R. Akre et al., “LCLS LLRF Upgrades to the SLAC Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS036, pp. 2421-2423.
Back to search