JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1714-1716. doi:10.18429/JACoW-IPAC2016-TUPOR025
[n]	P. A. Zavodszky, “INNOVATI VE DESIGN PRINCIPLES OF SUSI ÔÇô SUPERCONDUCTING?SOURCE FOR IONS AT NSCL/MSU”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20B4, pp. XX-XX. 
[n]	A. J. Gonsalves et al., “Multi-GeV Plasma Acceleration Results at BELLA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1319-1324. doi:10.18429/JACoW-IPAC2015-TUYC2
[n]	G. Riddone et al., “Technical Specification for the CLIC Two-Beam Module”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP028, pp. 607-609. 
[n]	S. Bauer, M. Pekeler, W. Anders, J. Knobloch, and W.-D. M?Âller, “Vertical and Horizontal Test Results of TESLA Cavities for BESSY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP13, pp. 267-267. 
[n]	B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421. 
[n]	M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811. 
[n]	H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 370-373. doi:10.18429/JACoW-IPAC2015-MOPJE038
[n]	J. Bahrdt et al., “Measurements of the Lattice Modifications for the Cryogenic Undulator CPMU17”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4031-4034. doi:10.18429/JACoW-IPAC2016-THPOW039
[n]	G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191. 
[n]	A. Kosicek, P. Leban, and K. B. Scheidt, “Beam Lifetime Measurements with Libera Brilliance”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM063, pp. 311-314. 
[n]	Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181. 
[n]	E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158. 
[n]	E. Barbero et al., “Accuracy Of The LEP Spectrometer Beam Orbit Monitors”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM03, pp. XX-XX. 
[n]	H. G. Khodzhibagiyan et al., “Prototype Superconducting Magnets for the NICA Accelerator Complex”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME028, pp. 3567-3569. 
[n]	R. Tikhoplav et al., “The UCLA Helical Permanent-Magnet Inverse Free Electron Laser”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS026, pp. 3055-3057. 
[n]	C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881. 
[n]	E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 196-199. doi:10.18429/JACoW-IPAC2018-MOPMF043
[n]	J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 618-621. doi:10.18429/JACoW-ICALEPCS2017-TUPHA088
[n]	A. A. Aksoy, ?û. Karsli, C. Kaya, O. Yavas, P. Arikan, and S. Ozkorucuklu, “The Turkish Accelerator and Radiation Laboratory in Ankara (TARLA) Project”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP089, pp. 585-588. 
[n]	K. V. Ettinger, O. J. Filkin, and B. J. Thomas, “Transmission Detectors for Cyclotron in-vivo Irradiations with Neutrons”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-14, pp. 467-470. 
[n]	B. Bonin, “Saclay Laboratory Report”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95A02, pp. 19-21. 
[n]	K. Anderson, C. M. Bhat, J. Marriner, and Z. Tang, “An Antiproton Target Design for Increased Beam Intensity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1946-1949. 
[n]	N. Elias, C. Darve, J. Fydrych, A. Nordt, and D. P. Piso, “Preliminary Functional Analysis and Operating Modes of ESS 704 MHz Superconducting Radio-Frequency Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3317-3319. doi:10.18429/JACoW-IPAC2014-THPME042
[n]	P. Jines and B. Craft, “PLC Based Upgrades for the CAMD Linac and Storage Ring Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP037, pp. XX-XX. 
[n]	J. Tan, B. Bonin, and H. Safa, “Thermal Contact Resistance of a Particle on a Substrate”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C02, pp. 369-372. 
[n]	L. E. Juergensen et al., “Installation of a Beam Loss Monitoring System at the S-DALINAC”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD24, pp. 468-470. 
[n]	E. Petit, “Progress of the SPIRAL2 Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEYA01, pp. 1912-1916. 
[n]	C. Clavero, D. Beringer, R. A. Lukaszew, W. M. Roach, R. Skuza, and C. E. Reece, “Strain Effects in the Superconducting Properties of Niobium Thin Films grown on Sapphire”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO047, pp. 835-837. 
[n]	Yu. A and N. Yu. Yazvitskii, “DESIGN AND TESTS OF A SUPERCONDUCTING MAGNET WITH A CRYOCOOLER FOR THE ION SOURCE DECRIS-SC”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP09, pp. XX-XX. 
[n]	D. Quartullo, S. C. P. Albright, and E. N. Shaposhnikova, “Studies of Longitudinal Beam Stability in CERN PS Booster After Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4469-4472. doi:10.18429/JACoW-IPAC2017-THPVA023
[n]	V. A. Lebedev, S. Nagaitsev, J.-F. Ostiguy, A. V. Shemyakin, B. G. Shteynas, and N. Solyak, “PXIE Optics and Layout”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP057, pp. 3871-3873. 
[n]	W. Chou, M. A. Kostin, J. R. Lackey, R. J. Macek, Z. Tang, and P. S. Yoon, “Some Physics Issues of Carbon Stripping Foils”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS013, pp. 1679-1681. 
[n]	J. Maslow, J. Coleman, T. Kelehan, V. Rodriguez, and J. Koglin, “Modernization of DARHT axis-I debris blocker”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3428-3430. doi:10.18429/JACoW-IPAC2024-THPG67
[n]	Y. K. Batygin, V. K. Bharadwaj, D. C. Schultz, and J. C. Sheppard, “Design Studies of Positron Collection for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH056, pp. 3804-3806. 
[n]	H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120. 
[n]	L. Liu et al., “Preliminary Sirius Commissioning Results”, in Proc. IPAC'20, Caen, France, May 2020, pp. 11. doi:10.18429/JACoW-IPAC2020-MOVIR06
[n]	C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2561-2564. doi:10.18429/JACoW-IPAC2016-WEPMY009
[n]	D. Quartullo, E. N. Shaposhnikova, and H. Timko, “Controlled Longitudinal Emittance Blow-Up Using Band-Limited Phase Noise in CERN PSB”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4473-4476. doi:10.18429/JACoW-IPAC2017-THPVA024
[n]	D. Mihalcea, P. Piot, B. M. Cowan, and P. Stoltz, “Wakefield Generation in Compact Rectangular Dielectric-Loaded Structures Using Flat Beams”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP132, pp. 340-342. 
[n]	H.-U. Klein, “Recent Developments in Hadron Therapy Accelerators”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FOAB003, unpublished. 
[n]	A.-S. M??ller et al., “Observation of Coherent THz Radiation from the ANKA and MLS Storage Rings with a Hot Electron Bolometer”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP027, pp. 1153-1155. 
[n]	K. S. B. Li et al., “Low Emittance X-FEL Development”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP016, pp. XX-XX. 
[n]	G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896. 
[n]	A. V. Aleksandrov and C. Deibele, “New Design of the SNS MEBT Chopper Deflector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS073, pp. 1817-1819. 
[n]	L. Muguira et al., “Automatic Tuner Unit Operation for the Microwave System of the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD070, pp. 2684-2686. 
[n]	Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624. 
[n]	P. O. Schmid, D. B. Engel, J. Feikes, P. Kuske, R. M??ller, and G. W??stefeld, “Optics calibration at the MLS and at BESSY II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA014, pp. 2505-2507. 
[n]	C. Bietha, “PKDELIS : AN ECRIS USING HIGH TEMPERATURE SUPERCONDUCTING WIRES AND OTHER SPECIALIZD ECRIS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20B5, pp. XX-XX. 
[n]	R. L. Warnock, J. C. Bergstrom, and M. Klein, “Inter-bunch Communication through CSR in Whispering Gallery Modes”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA19, pp. 219-221. 
[n]	N. Tani, H. Hotchi, J. Kamiya, M. Kinsho, O. Takeda, and M. Yamamoto, “Alignment Plan and Survey Results of the Equipment for J-PARC 3 GeV RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME020, pp. 2971-2973. 
[n]	X. Yang et al., “Interferometric Measurement of Bunch Length of a 3Mev Picocoulomb Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2766-2769. doi:10.18429/JACoW-IPAC2019-WEPGW114
[n]	F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2143-2146. doi:10.18429/JACoW-IPAC2023-TUPL169
[n]	W. E. Fischer, “Application of Spallation Neutron Sources”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THYLA001, pp. 114-118. 
[n]	S. Adam, W. Joho, P. Lanz, H. Leber, N. Schmid, and U. Schryber, “First Operation of a Flattop Accelerating System in an Isochronous Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2721-2724. 
[n]	G. G. Venturini, B. Dehning, E. Effinger, J. Emery, and C. Zamantzas, “Systematic Study of Acquisition Electronics with a High Dynamic Range for a Beam Loss Measurement System”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB33, pp. 245-247. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search