Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Benabderrahmane et al., “Development and Construction of Cryogenic Permanent Magnet Undulators for ESRF-EBS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2712-2715. doi:10.18429/JACoW-IPAC2022-THPOPT050
[n] Y. Martirosyan, M. Ivanyan, and V. Tsakanov, “Beam Current Limitations Study for CANDLE Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE016, pp. 718-720.
[n] R. D. Archuleta and L. Sanchez, “The DARHT Data Acquisition, Archival, Analysis, and Instrument Control System (DAAAC), and Network Infrastructure”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP112, pp. 337-339.
[n] K. Wakonig et al., “A Beamline and Experiment Control System for the SLS 2.0”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 71-77. doi:10.18429/JACoW-ICALEPCS2023-MO2AO02
[n] A. Laxdal et al., “Recirculated Electron Beam in Photo-Converter for Rare Isotope Production”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2526-2529. doi:10.18429/JACoW-IPAC2017-WEOBB1
[n] Y. Mori et al., “Neutron Source with Emittance Recovery Internal Target”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GAC04, pp. 3145-3147.
[n] N. Hamann et al., “Investigation of plasma stability of the prototype plasma lens for positron matching”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 538-540. doi:10.18429/JACoW-IPAC2024-MOPR39
[n] R. Gerig, C. Moore, and S. Pruss, “Measurement of Incoherent Laslett Tune Shifts in the Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2488-2491.
[n] P. Krzeminski et al., “IOT Amplifiers for FELs”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH067, pp. XX-XX.
[n] P. Bertrand et al., “SPIRaL: A Radioactive Ion Beam Facility at GANIL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1789-1792.
[n] N. Carmignani et al., “Light upgrade of the ESRF booster”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 730-732. doi:10.18429/JACoW-IPAC2025-MOPS051
[n] C. Rohde and K. Bishofberger, “Building a MOPA laser for H- beam shaping”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7364, unpublished.
[n] C. Phillips et al., “Experimental demonstration of a straight-merger beamline”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3233-3235. doi:10.18429/JACoW-IPAC2023-WEPL053
[n] C. Appel et al., “First light received by Beamline Experiment Control”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD057, unpublished.
[n] S. Shaik et al., “Conceptual design of a 325 MHz Inductive Output Tube (IOT)”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB011, unpublished.
[n] H. Namgoong, J.-S. Chai, M. Ghergherehchi, D. H. Ha, H. S. Kim, and J. C. Lee, “Design of High Sensitive Magnet and Beam Dynamics for AMS Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 103-105. doi:10.18429/JACoW-CYCLOTRONS2019-MOP031
[n] H. Churn, C. Benjamin, L. Jones, K. Morrow, T. Noakes, and D. Sterland, “Delivery of caesium telluride photocathodes to the CLARA accelerator at Daresbury Laboratory”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2143, unpublished.
[n] C. Bernerd et al., “CERN-MEDICIS: A unique facility for the production of radionuclides for medical research”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1071-1074. doi:10.18429/JACoW-IPAC2025-TUPB047
[n] P. Greninger, “Bridge Coupler for APT”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD19, pp. 953-955.
[n] M. Di Giacomo, M. Michel, P. Bertrand, P. Balleyguier, and G. Fremont, “Electrode Design Improvements in the SPIRAL2 Single Bunch Selector”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP098, pp. 286-288.
[n] J. Valladares, J. Bradley, L. Castellano, and T. Tajima, “CST simulation and RF power for an equivalent SCL cavity at LANSCE”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 404-406. doi:10.18429/JACoW-NAPAC2025-TUP025
[n] C. Benabderrahmane et al., “Magnets development for the ESRF-EBS injection upgrade”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7058, unpublished.
[n] D. J. Wang, S. Y. Perng, H. C. Ho, T. C. Tseng, and C. K. Kuan, “New Magnet Girder Design in the NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14003, pp. XX-XX.
[n] K. Deitrick, “Microbunching gain evaluation of bunch stretcher designs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2774-2776. doi:10.18429/JACoW-IPAC2023-WEPA051
For LaTeX
Use Complete Form
For BibTeX
References
- C. Benabderrahmane et al., “Development and Construction of Cryogenic Permanent Magnet Undulators for ESRF-EBS”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2712-2715.
- Y. Martirosyan, M. Ivanyan, and V. Tsakanov, “Beam Current Limitations Study for CANDLE Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE016, pp. 718-720.
- R. D. Archuleta and L. Sanchez, “The DARHT Data Acquisition, Archival, Analysis, and Instrument Control System (DAAAC), and Network Infrastructure”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP112, pp. 337-339.
- K. Wakonig et al., “A Beamline and Experiment Control System for the SLS 2.0”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2AO02, pp. 71-77.
- A. Laxdal et al., “Recirculated Electron Beam in Photo-Converter for Rare Isotope Production”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2526-2529.
- Y. Mori et al., “Neutron Source with Emittance Recovery Internal Target”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH4GAC04, pp. 3145-3147.
- N. Hamann et al., “Investigation of plasma stability of the prototype plasma lens for positron matching”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR39, pp. 538-540.
- R. Gerig, C. Moore, and S. Pruss, “Measurement of Incoherent Laslett Tune Shifts in the Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2488-2491.
- P. Krzeminski et al., “IOT Amplifiers for FELs”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH067, pp. XX-XX.
- P. Bertrand et al., “SPIRaL: A Radioactive Ion Beam Facility at GANIL”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1789-1792.
- N. Carmignani et al., “Light upgrade of the ESRF booster”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS051, pp. 730-732.
- C. Rohde and K. Bishofberger, “Building a MOPA laser for H- beam shaping”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7364, this conference.
- C. Phillips et al., “Experimental demonstration of a straight-merger beamline”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL053, pp. 3233-3235.
- C. Appel et al., “First light received by Beamline Experiment Control”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD057, unpublished.
- S. Shaik et al., “Conceptual design of a 325 MHz Inductive Output Tube (IOT)”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB011, unpublished.
- H. Namgoong, J.-S. Chai, M. Ghergherehchi, D. H. Ha, H. S. Kim, and J. C. Lee, “Design of High Sensitive Magnet and Beam Dynamics for AMS Cyclotron”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 103-105.
- H. Churn, C. Benjamin, L. Jones, K. Morrow, T. Noakes, and D. Sterland, “Delivery of caesium telluride photocathodes to the CLARA accelerator at Daresbury Laboratory”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2143, this conference.
- C. Bernerd et al., “CERN-MEDICIS: A unique facility for the production of radionuclides for medical research”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB047, pp. 1071-1074.
- P. Greninger, “Bridge Coupler for APT”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THD19, pp. 953-955.
- M. Di Giacomo, M. Michel, P. Bertrand, P. Balleyguier, and G. Fremont, “Electrode Design Improvements in the SPIRAL2 Single Bunch Selector”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP098, pp. 286-288.
- J. Valladares, J. Bradley, L. Castellano, and T. Tajima, “CST simulation and RF power for an equivalent SCL cavity at LANSCE”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 404-406.
- C. Benabderrahmane et al., “Magnets development for the ESRF-EBS injection upgrade”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7058, this conference.
- D. J. Wang, S. Y. Perng, H. C. Ho, T. C. Tseng, and C. K. Kuan, “New Magnet Girder Design in the NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14003, pp. XX-XX.
- K. Deitrick, “Microbunching gain evaluation of bunch stretcher designs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA051, pp. 2774-2776.
Back to search