Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Gerhard and M. T. Maier, “Heavy Ion Stripping”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 24-30. doi:10.18429/JACoW-HIAT2022-MO3I3
[n] L. R. Carmichael, D. J. Crawford, N. Liu, R. Neswold, A. Warner, and J. Y. Wu, “Commissioning and Design of the Machine Protection System for Fermilab's Fast Facility”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 428-430. doi:10.18429/JACoW-ICALEPCS2015-MOPGF145
[n] W. Blokland, Y. Liu, B. W. Riemer, M. Wendel, and D. E. Winder, “Strain and Temperature Measurements From the SNS Mercury Target Vessel During High Intensity Beam Pulses”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1230-1233. doi:10.18429/JACoW-IPAC2017-TUOBA3
[n] A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
[n] V. Guidi et al., “Characterization of Crystals for Steering of Protons through Channelling in Hadronic Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS016, pp. 1523-1525.
[n] M. Sangroula et al., “Design Study of button BPMs for the EIC Hadron Storage Ring”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL056, unpublished.
[n] C. J. Bocchetta et al., “ELETTRA Performance and Upgrades”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V023, pp. 826-828.
[n] N. Hosoda et al., “Reconfigurable Timing Controller Using PLDs”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP547, pp. XX-XX.
[n] A. Amato, M. Castro, G. Cuttone, D. Giove, A. Paccalini, and G. Rivoltella, “Operational Experience with the Distributed Control System of the Milan Superconducting Cyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1111-1114.
[n] K. Furukawa et al., “Control System Achievement at KEKB and Upgrade Design for SuperKEKB”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOBAUST05, pp. 17-19.
[n] L. Søby et al., “Elena Orbit and Schottky Measurement Systems”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1061-1064. doi:10.18429/JACoW-IPAC2015-MOPTY056
[n] S. Barbanotti, K. Jensch, W. Maschmann, and O. Sawlanski, “XFEL Cryomodule Transportation: from the Assembly Laboratory in CEA-Saclay (France) to the Test-Hall in DESY-Hamburg (Germany)”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP021, pp. 98-100.
[n] S. White, L. Carver, L. Farvacque, and S. Liuzzo, “Status and recent developments of python Accelerator Toolbox”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3185-3188. doi:10.18429/JACoW-IPAC2023-WEPL031
For LaTeX
Use Complete Form
For BibTeX
References
- P. Gerhard and M. T. Maier, “Heavy Ion Stripping”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 24-30.
- L. R. Carmichael, D. J. Crawford, N. Liu, R. Neswold, A. Warner, and J. Y. Wu, “Commissioning and Design of the Machine Protection System for Fermilab's Fast Facility”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 428-430.
- W. Blokland, Y. Liu, B. W. Riemer, M. Wendel, and D. E. Winder, “Strain and Temperature Measurements From the SNS Mercury Target Vessel During High Intensity Beam Pulses”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1230-1233.
- A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
- V. Guidi et al., “Characterization of Crystals for Steering of Protons through Channelling in Hadronic Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS016, pp. 1523-1525.
- M. Sangroula et al., “Design Study of button BPMs for the EIC Hadron Storage Ring”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL056, unpublished.
- C. J. Bocchetta et al., “ELETTRA Performance and Upgrades”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6V023, pp. 826-828.
- N. Hosoda et al., “Reconfigurable Timing Controller Using PLDs”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP547, pp. XX-XX.
- A. Amato, M. Castro, G. Cuttone, D. Giove, A. Paccalini, and G. Rivoltella, “Operational Experience with the Distributed Control System of the Milan Superconducting Cyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1111-1114.
- K. Furukawa et al., “Control System Achievement at KEKB and Upgrade Design for SuperKEKB”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOBAUST05, pp. 17-19.
- L. Søby et al., “Elena Orbit and Schottky Measurement Systems”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1061-1064.
- S. Barbanotti, K. Jensch, W. Maschmann, and O. Sawlanski, “XFEL Cryomodule Transportation: from the Assembly Laboratory in CEA-Saclay (France) to the Test-Hall in DESY-Hamburg (Germany)”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP021, pp. 98-100.
- S. White, L. Carver, L. Farvacque, and S. Liuzzo, “Status and recent developments of python Accelerator Toolbox”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL031, pp. 3185-3188.
Back to search