Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Kim, G. Kim, and S. H. Yoo, “Density Structure Effect on the Electron Energy in Laser Wakefield Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC007, pp. 4068-4070.
[n] G. Bassi, “Analytical formulae for the longitudinal impedance of two parallel layers with arbitrary complex permittivity and permeability”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3428-3431. doi:10.18429/JACoW-IPAC2023-WEPL139
[n] S. Ghatak, A. S. Dhavale, and K. C. Mittal, “Multipacting Analysis of Superconducting RF Cavities using a Finite Element-based Code employing Leap Frog Method”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC011, pp. 2914-2916.
[n] A. S. Dhavale and K. C. Mittal, “Study of Multipacting in a Coaxial Coupler”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC012, pp. 2917-2919.
[n] F. H. O, R. B. Agustsson, Y. C. Chen, E. Spranza, D. W. Martin, and J. D. McNevin, “Non-linear Magnetic Inserts for the Integrable Optics Test Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 724-727. doi:10.18429/JACoW-IPAC2015-MOPMN010
[n] B. Folsom and E. Laface, “Relativistic beam loading and recoil effects using a covariant, retarded-potential iterator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3352-3355. doi:10.18429/JACoW-IPAC2023-WEPL105
[n] I. S. Park, J. S. Yang, M. Kwon, and I. S. Ko, “Development of a Disk-Type Cavity Input Coupler”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D032, pp. 755-757.
[n] Y.-G. Song, Y.-S. Cho, J.-H. Jang, and H.-J. Kwon, “Design and Implementation of Distributed Control System for PEFP 100-MeV Proton Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC146, pp. 2334-2336.
[n] C. H. Huang et al., “Online RadFET Reader for Beam Loss Monitoring System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1097-1099. doi:10.18429/JACoW-IPAC2015-MOPTY070
[n] H. Lancaster, “An Analytical Solution for the Electrical Properties of a Radio-Frequency Quadrupole (RFQ) with Simple Vanes”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H12, pp. 293-295.
[n] G. Ciovati, P. Dhakal, R. Myneni, P. Maheshwari, and F. A. Stevie, “High-Temperature Heat Treatment Study on a Large-Grain Nb Cavity”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO051, pp. 508-511.
[n] Y. T. Cheng, G.-Y. Hsiung, C. K. Kuan, A. Sheng, H. Y. Yan, and J.-R. Chen, “Photon-stimulated Desorption Experiment for a TPS Crotch Absorber”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS067, pp. 1692-1694.
[n] Q. King, S. T. Page, H. Thiesen, and M. Veenstra, “Function Generation and Regulation Libraries and their Application to the Control of the New Main Power Converter (POPS) at the CERN CPS”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN008, pp. 886-889.
[n] A. Pozenel, M. Eichinger, S. Enke, M. F??rtinger, C. Kurf??rst, and M. Repov, “Pin Diode in a Medical Accelerator - a Proof of Principle and Preliminary Measurements”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 208-210. doi:10.18429/JACoW-IBIC2018-TUPA01
[n] J. Skaritka et al., “The Design and Construction of NSLS-II Magnets”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP008, pp. 145-147.
[n] L. de Ruvo, M. L. Allegrini, D. Benini, F. Gelain, and D. Marcato, “Functional Architecture of SPES Safety System”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4733-4735. doi:10.18429/JACoW-IPAC2023-THPL114
[n] J. Cuperus, F. James, and W. Pirkl, “The RF-System of the CERN ''New Linac''”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-4, pp. 344-347.
[n] Y.-G. Song, Y.-S. Cho, J.-H. Jang, H.-J. Kwon, and K. T. Seol, “Timing System for the PEFP 100-MeV Proton LINAC and Multipurpose Beamlines”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD051, pp. 2633-2635.
[n] Y.-S. Cheng, J. Chen, P. C. Chiu, K. T. Hsu, C. H. Huang, and C. Y. Liao, “Development of EPICS Applications for the Taiwan Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1116-1119. doi:10.18429/JACoW-IPAC2015-MOPTY076
[n] C. H. Huang et al., “Beam Loss Study of TLS Using RadFETs”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1103-1105. doi:10.18429/JACoW-IPAC2015-MOPTY072
[n] B. Goddard et al., “Transient Beam Losses in the LHC Injection Kickers from Micron Scale Dust Particles”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR092, pp. 2044-2046.
[n] C. H. Huang, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, D. Lee, and C. Y. Liao, “Vibration Measurement of the Magnets in the Storage Ring of TPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1112-1115. doi:10.18429/JACoW-IPAC2015-MOPTY075
[n] G. Baribaud et al., “Start-up of the New CPS Controls System and Switch-Over of the 800 MeV Booster Controls”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2267-2270.
[n] H. Tian et al., “Development of SIMS Standards for Measurement of H, C, O, N in Nb”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO082, pp. 426-426.
[n] B. Salvant et al., “Update of the SPS Impedance Model”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD056, pp. 2057-2059.
[n] W. Chupp et al., “A Quadrupole Beam Transport Experiment for Heavy Ions Under Extreme Space Charge Conditions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2549-2552.
[n] M. G. Abbott, G. Rehm, and I. Uzun, “A New Fast Data Logger and Viewer at Diamond: the FA Archiver”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST03, pp. 1244-1247.
[n] M. C. Ross, N. J. Walker, and A. Yamamoto, “Present Status of the ILC Project and Developments”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOYBA01, pp. 16-20.
[n] K. A. Brown et al., “Multiple Single Bunch Extraction to the AGS Switchyard”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH130, pp. 1514-1516.
[n] R. Murillo-Garcia, Q. King, and M. Magrans de Abril, “Control of Fast-Pulsed Power Converters at CERN Using a Function Generator/Controller”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 281-285. doi:10.18429/JACoW-ICALEPCS2015-MOPGF090
[n] D. Trbojevic, R. C. Gupta, E. Keil, B. Parker, and A. Sessler, “Superconducting Non-Scaling FFAG Gantry for Carbon/Proton Cancer Therapy”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS092, pp. 3199-3201.
[n] S. T. Sievers et al., “Second-Sound Measurements on a 3 GHz SRF Cavity at Low Acceleration Fields”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP106, pp. 728-730.
[n] R. Bailey et al., “Three Years Operational Experience with LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 63-66.
[n] H. Koiso, “Commissioning Status of High Luminosity Collider Rings for SuperKEKB”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1275-1280. doi:10.18429/JACoW-IPAC2017-TUZB2
[n] R. C. Lee, R. H. Olsen, and K. L. Unger, “Trials, Tribulations, and Pitfalls Using Commercial Instruments for Data Acquisition”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP083, pp. 561-563.
[n] Y. Shoji, T. Nakamura, J. Schimizu, and M. Takao, “Amplitude Dependent Orbit Shift and its Effect on Beam Injection”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC016, pp. 2040-2042.
[n] Y. Li et al., “Linear optics compensation for the HEX superconducting wiggler at NSLS-II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3123-3125. doi:10.18429/JACoW-IPAC2023-WEPL009
[n] O. Berrig, M. Jonker, D. Lohmann, and G. Morpurgo, “The Q-loop: A Function Driven Feedback System for the Betatron Tunes during the LEP Energy Ramp”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP12H, pp. 1717-1719.
[n] S. Canella and D. Benini, “Quality-Safety Management and Protective Systems for SPES”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU022, pp. 1108-1110.
[n] M. Zerlauth, A. Jimeno, G. Morpurgo, and R. Schmidt, “The Electrical Circuit Description for the LHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO014, pp. 2058-2060.
[n] C.-C. Kuo and H.-J. Tsai, “Design of Low Momentum Compaction Lattices for the TPS Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA060, pp. 217-219.
[n] G. Danby et al., “Design and Measurement of the NSLS II Correctors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP009, pp. 148-150.
[n] G. Morpurgo, “The Bom 1000 Turn Display: A Tool to Visualize the Transverse Phase-space Topology at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP14H, pp. 1571-1573.
[n] J. K. Johnson and R. Nemetz, “Power Combiners/Dividers for Loop Pickup and Kicker Arrays for FNAL Stochastic Cooling Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2171-2174.
[n] T. Nakamura, “Bucket-by-bucket On/Off-axis Injection with Variable Field Fast Kicker”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC095, pp. 1230-1232.
[n] M. Rehak, J. Bengtsson, G. Danby, J. W. Jackson, J. Skaritka, and C. J. Spataro, “Design of the NSLS II High Order Multipole Correctors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP006, pp. 139-141.
[n] P. Dhakal, G. Ciovati, P. Kneisel, and R. Myneni, “Superconducting DC and RF Properties of Ingot Niobium”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO057, pp. 856-861.
[n] M. Chung, A. V. Tollestrup, K. Yonehara, and B. T. Freemire, “Transient Beam Loading Effects in Gas-filled RF Cavities for a Muon Collider”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI053, pp. 1463-1465.
[n] S. K. Suhane et al., “Engineering Design of Vertical Test Stand Cryostat”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP033, pp. 874-876.
[n] H.-J. Kwon et al., “Improvement of the 20 MeV Proton Accelerator at KAERI”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS022, pp. 3466-3468.
[n] E. Hartwig, “The AEG Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F04, pp. XX-XX.
[n] J. Lee et al., “Bunch by Bunch Position Measurement and Analysis at PLS-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 232-234. doi:10.18429/JACoW-IPAC2016-MOPMR002
[n] N. Angert et al., “Commissioning and First Operation Experience of the New Heavy Ion Injector of the UNILAC”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 167-170.
[n] D. C. Shin, J. H. Hong, H.-S. Kang, C. Kim, G. Kim, and C.-K. Min, “Development of BAM Electronics in PAL-XFEL”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 400-403. doi:10.18429/JACoW-IBIC2018-WEPA15
[n] M. Fitterer et al., “Lattice Design of a RCS as Possible Alternative to the PS Booster Upgrade”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS101, pp. 2745-2747.
[n] B. Yan, “Post-linac beam collimation study at the beam distribution section of SHINE”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL064, unpublished.
[n] J. Klem and G. Morpurgo, “A Method to Measure the Beta-beating in a 90 Degrees Phase Advance Lattice”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A09, pp. 1792-1794.
[n] K. C. Harkay et al., “High-Charge Injector for on-Axis Injection Into A High-Performance Storage Ring Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3423-3426. doi:10.18429/JACoW-IPAC2019-THYYPLM3
[n] M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3002-3003.
[n] R. B. Neal, “Superconducting Linac Development”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 134-135.
[n] Q. King, “Status of the LHC Power Converter Controls”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOB003, pp. 4-6.
[n] J. Allinger, G. Danby, J. Jackson, and A. Prodell, “Ultra Stable High Field Superconducting Dipoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1323-1325.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Kim, G. Kim, and S. H. Yoo, “Density Structure Effect on the Electron Energy in Laser Wakefield Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC007, pp. 4068-4070.
- G. Bassi, “Analytical formulae for the longitudinal impedance of two parallel layers with arbitrary complex permittivity and permeability”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL139, pp. 3428-3431.
- S. Ghatak, A. S. Dhavale, and K. C. Mittal, “Multipacting Analysis of Superconducting RF Cavities using a Finite Element-based Code employing Leap Frog Method”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC011, pp. 2914-2916.
- A. S. Dhavale and K. C. Mittal, “Study of Multipacting in a Coaxial Coupler”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC012, pp. 2917-2919.
- F. H. O, R. B. Agustsson, Y. C. Chen, E. Spranza, D. W. Martin, and J. D. McNevin, “Non-linear Magnetic Inserts for the Integrable Optics Test Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 724-727.
- B. Folsom and E. Laface, “Relativistic beam loading and recoil effects using a covariant, retarded-potential iterator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL105, pp. 3352-3355.
- I. S. Park, J. S. Yang, M. Kwon, and I. S. Ko, “Development of a Disk-Type Cavity Input Coupler”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D032, pp. 755-757.
- Y.-G. Song, Y.-S. Cho, J.-H. Jang, and H.-J. Kwon, “Design and Implementation of Distributed Control System for PEFP 100-MeV Proton Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC146, pp. 2334-2336.
- C. H. Huang et al., “Online RadFET Reader for Beam Loss Monitoring System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1097-1099.
- H. Lancaster, “An Analytical Solution for the Electrical Properties of a Radio-Frequency Quadrupole (RFQ) with Simple Vanes”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H12, pp. 293-295.
- G. Ciovati, P. Dhakal, R. Myneni, P. Maheshwari, and F. A. Stevie, “High-Temperature Heat Treatment Study on a Large-Grain Nb Cavity”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO051, pp. 508-511.
- Y. T. Cheng, G.-Y. Hsiung, C. K. Kuan, A. Sheng, H. Y. Yan, and J.-R. Chen, “Photon-stimulated Desorption Experiment for a TPS Crotch Absorber”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS067, pp. 1692-1694.
- Q. King, S. T. Page, H. Thiesen, and M. Veenstra, “Function Generation and Regulation Libraries and their Application to the Control of the New Main Power Converter (POPS) at the CERN CPS”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN008, pp. 886-889.
- A. Pozenel, M. Eichinger, S. Enke, M. F??rtinger, C. Kurf??rst, and M. Repov, “Pin Diode in a Medical Accelerator - a Proof of Principle and Preliminary Measurements”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 208-210.
- J. Skaritka et al., “The Design and Construction of NSLS-II Magnets”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP008, pp. 145-147.
- L. de Ruvo, M. L. Allegrini, D. Benini, F. Gelain, and D. Marcato, “Functional Architecture of SPES Safety System”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL114, pp. 4733-4735.
- J. Cuperus, F. James, and W. Pirkl, “The RF-System of the CERN ''New Linac''”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-4, pp. 344-347.
- Y.-G. Song, Y.-S. Cho, J.-H. Jang, H.-J. Kwon, and K. T. Seol, “Timing System for the PEFP 100-MeV Proton LINAC and Multipurpose Beamlines”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD051, pp. 2633-2635.
- Y.-S. Cheng, J. Chen, P. C. Chiu, K. T. Hsu, C. H. Huang, and C. Y. Liao, “Development of EPICS Applications for the Taiwan Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1116-1119.
- C. H. Huang et al., “Beam Loss Study of TLS Using RadFETs”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1103-1105.
- B. Goddard et al., “Transient Beam Losses in the LHC Injection Kickers from Micron Scale Dust Particles”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR092, pp. 2044-2046.
- C. H. Huang, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, D. Lee, and C. Y. Liao, “Vibration Measurement of the Magnets in the Storage Ring of TPS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1112-1115.
- G. Baribaud et al., “Start-up of the New CPS Controls System and Switch-Over of the 800 MeV Booster Controls”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2267-2270.
- H. Tian et al., “Development of SIMS Standards for Measurement of H, C, O, N in Nb”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO082, pp. 426-426.
- B. Salvant et al., “Update of the SPS Impedance Model”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD056, pp. 2057-2059.
- W. Chupp et al., “A Quadrupole Beam Transport Experiment for Heavy Ions Under Extreme Space Charge Conditions”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2549-2552.
- M. G. Abbott, G. Rehm, and I. Uzun, “A New Fast Data Logger and Viewer at Diamond: the FA Archiver”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST03, pp. 1244-1247.
- M. C. Ross, N. J. Walker, and A. Yamamoto, “Present Status of the ILC Project and Developments”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOYBA01, pp. 16-20.
- K. A. Brown et al., “Multiple Single Bunch Extraction to the AGS Switchyard”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH130, pp. 1514-1516.
- R. Murillo-Garcia, Q. King, and M. Magrans de Abril, “Control of Fast-Pulsed Power Converters at CERN Using a Function Generator/Controller”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 281-285.
- D. Trbojevic, R. C. Gupta, E. Keil, B. Parker, and A. Sessler, “Superconducting Non-Scaling FFAG Gantry for Carbon/Proton Cancer Therapy”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS092, pp. 3199-3201.
- S. T. Sievers et al., “Second-Sound Measurements on a 3 GHz SRF Cavity at Low Acceleration Fields”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP106, pp. 728-730.
- R. Bailey et al., “Three Years Operational Experience with LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 63-66.
- H. Koiso, “Commissioning Status of High Luminosity Collider Rings for SuperKEKB”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1275-1280.
- R. C. Lee, R. H. Olsen, and K. L. Unger, “Trials, Tribulations, and Pitfalls Using Commercial Instruments for Data Acquisition”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP083, pp. 561-563.
- Y. Shoji, T. Nakamura, J. Schimizu, and M. Takao, “Amplitude Dependent Orbit Shift and its Effect on Beam Injection”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC016, pp. 2040-2042.
- Y. Li et al., “Linear optics compensation for the HEX superconducting wiggler at NSLS-II”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL009, pp. 3123-3125.
- O. Berrig, M. Jonker, D. Lohmann, and G. Morpurgo, “The Q-loop: A Function Driven Feedback System for the Betatron Tunes during the LEP Energy Ramp”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP12H, pp. 1717-1719.
- S. Canella and D. Benini, “Quality-Safety Management and Protective Systems for SPES”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU022, pp. 1108-1110.
- M. Zerlauth, A. Jimeno, G. Morpurgo, and R. Schmidt, “The Electrical Circuit Description for the LHC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO014, pp. 2058-2060.
- C.-C. Kuo and H.-J. Tsai, “Design of Low Momentum Compaction Lattices for the TPS Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA060, pp. 217-219.
- G. Danby et al., “Design and Measurement of the NSLS II Correctors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP009, pp. 148-150.
- G. Morpurgo, “The Bom 1000 Turn Display: A Tool to Visualize the Transverse Phase-space Topology at LEP”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP14H, pp. 1571-1573.
- J. K. Johnson and R. Nemetz, “Power Combiners/Dividers for Loop Pickup and Kicker Arrays for FNAL Stochastic Cooling Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2171-2174.
- T. Nakamura, “Bucket-by-bucket On/Off-axis Injection with Variable Field Fast Kicker”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC095, pp. 1230-1232.
- M. Rehak, J. Bengtsson, G. Danby, J. W. Jackson, J. Skaritka, and C. J. Spataro, “Design of the NSLS II High Order Multipole Correctors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP006, pp. 139-141.
- P. Dhakal, G. Ciovati, P. Kneisel, and R. Myneni, “Superconducting DC and RF Properties of Ingot Niobium”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO057, pp. 856-861.
- M. Chung, A. V. Tollestrup, K. Yonehara, and B. T. Freemire, “Transient Beam Loading Effects in Gas-filled RF Cavities for a Muon Collider”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI053, pp. 1463-1465.
- S. K. Suhane et al., “Engineering Design of Vertical Test Stand Cryostat”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP033, pp. 874-876.
- H.-J. Kwon et al., “Improvement of the 20 MeV Proton Accelerator at KAERI”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS022, pp. 3466-3468.
- E. Hartwig, “The AEG Compact Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F04, pp. XX-XX.
- J. Lee et al., “Bunch by Bunch Position Measurement and Analysis at PLS-II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 232-234.
- N. Angert et al., “Commissioning and First Operation Experience of the New Heavy Ion Injector of the UNILAC”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 167-170.
- D. C. Shin, J. H. Hong, H.-S. Kang, C. Kim, G. Kim, and C.-K. Min, “Development of BAM Electronics in PAL-XFEL”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 400-403.
- M. Fitterer et al., “Lattice Design of a RCS as Possible Alternative to the PS Booster Upgrade”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS101, pp. 2745-2747.
- B. Yan, “Post-linac beam collimation study at the beam distribution section of SHINE”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL064, unpublished.
- J. Klem and G. Morpurgo, “A Method to Measure the Beta-beating in a 90 Degrees Phase Advance Lattice”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A09, pp. 1792-1794.
- K. C. Harkay et al., “High-Charge Injector for on-Axis Injection Into A High-Performance Storage Ring Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3423-3426.
- M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3002-3003.
- R. B. Neal, “Superconducting Linac Development”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 134-135.
- Q. King, “Status of the LHC Power Converter Controls”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOB003, pp. 4-6.
- J. Allinger, G. Danby, J. Jackson, and A. Prodell, “Ultra Stable High Field Superconducting Dipoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1323-1325.
Back to search