Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. K. Sullivan, K. J. Bertsche, S. Bettoni, E. Paoloni, P. Raimondi, and P. Vobly, “A New Interaction Region Design for the Super-B Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB027, pp. 1581-1583.
[n] M. K. Fukuda et al., “Generation of Multi-bunch Beam with Beam Loading Compensation by Using RF Amplitude Modulation in Laser Undulator Compact X-ray (LUCX)”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1576-1578. doi:10.18429/JACoW-IPAC2015-TUPWA065
[n] B. Parker et al., “A Superconducting Magnet Upgrade of the ATF2 Final Focus”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE041, pp. 3440-3442.
[n] D. E. Anderson et al., “Design of a 1-MV Induction Injector for the Relativisitic Two-Beam Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W012, pp. 590-592.
[n] S. Braccini, “Compact Medical Cyclotrons and their use for Radioisotope Production and Multi-disciplinary Research”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 229-234. doi:10.18429/JACoW-Cyclotrons2016-TUD01
[n] M. E. Inman et al., “Electropolishing of Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB101, pp. 390-393.
[n] R. Ferdinand et al., “SPIRAL2 Injector Commissioning”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 790-793. doi:10.18429/JACoW-LINAC2018-THPO047
[n] L. Celona et al., “The Proton Source for the European Spallation Source (PS-ESS): Installation and Commissioning at INFN-LNS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 39-42. doi:10.18429/JACoW-ECRIS2016-TUAO01
[n] R. E. Laxdal et al., “Initial Operating Experience with the Auxiliary Accelerating Cavity for the TRIUMF Cyclotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 810-813.
[n] B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52.
[n] S. F. Mikhailov, S. M. Hartman, J. Li, V. Popov, and Y. K. Wu, “Challenges for the Energy Ramping in a Compact Booster Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS015, pp. 1212-1214.
[n] D. Moffat et al., “Use of Ferrite-50 to Strongly Damp Higher Order Modes”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 664-667.
[n] D. Voulot et al., “HIE-ISOLDE SC Linac: Operational Aspects and Commissioning Preparation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP050, pp. 3853-3855.
[n] A. Castilla, J. R. Delayen, T. Satogata, and V. S. Morozov, “Modeling Crabbing Dynamics in an Electron-Ion Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2333-2335. doi:10.18429/JACoW-IPAC2015-TUPWI039
[n] R. C. York, J. S. McCarthy, B. E. Norum, and J. C. Sheppard, “A Proposal for a High Current, High Duty Factor Electron Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2080-2083.
[n] M. A. C. Cummings and L. L. Bandura, “Novel Techniques for Isotope Harvesting at FRIB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD031, pp. 1470-1472.
[n] R. Baartman, R. Laxdal, R. Lee, and G. H. Mackenzie, “Beam Optics for a 12-GeV Isochronous Ring Cyclotron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2010-2013.
[n] R. Bartolini et al., “Engineering Integration Constraints on the Beam Physics Optimisation of the DDBA Lattice for Diamond”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 322-324. doi:10.18429/JACoW-IPAC2014-MOPRO100
[n] S. Fu, H. C. Liu, H. F. Ouyang, S. Wang, J. Li, and J. Peng, “CSNS Front End and Linac Commissioning”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. XX-XX. doi:10.18429/JACoW-LINAC2018-MO1A01
[n] D. Sprehn, G. Caryotakis, E. Jongewaard, and R. M. Phillips, “Periodic Permanent Magnet Development for Linear Collider X-Band Klystrons”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE1005, pp. 689-696.
[n] H. A. Martirosyan, W. Bothe, V. P. Goncharenko, O. A. Gusev, V. Ts. Nikogosyan, and K. A. Sadoyan, “Magnetic Field Flat-Top of Yerevan Synchrotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1220-1222.
[n] M. S. Bakeman et al., “Undulator-based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP161, pp. 397-399.
[n] O. H. Altenmueller et al., “Beam Break-Up Experiments at SLAC”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-02, pp. 267-280.
[n] W. Bothe, “Active Filter for the DESY III Dipole Circuit”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 932-935.
[n] M. Bai et al., “RHIC Spin Flipper Status and Simulation Studies”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP191, pp. 447-449.
[n] M. Lamont et al., “The LHC Sector Test”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS012, pp. 559-561.
[n] F. Furuta et al., “RF Test Result of a BNL N-Doped 500 MHz B-Cell Cavity at Cornell”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2440-2442. doi:10.18429/JACoW-IPAC2018-WEPMF036
[n] B. Hong, R. Akre, and V. Pacak, “LLRF System Upgrade for the SLAC Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA061, pp. 1473-1475.
[n] S. Usherovich et al., “A novel fiber-optic beam monitor”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3890-3892. doi:10.18429/JACoW-IPAC2023-WEPM134
[n] F. Antoniou et al., “Intrabeam Scattering Studies at the Swiss Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR057, pp. 1951-1953.
[n] S. U. De Silva, A. Castilla, and J. R. Delayen, “Compact Superconducting RF-dipole Cavity Designs for Deflecting and Crabbing Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO080, pp. 2483-2485.
[n] Y. Fukui et al., “Design of an Optical Diffraction Radiation Beam Size Monitor at SLAC FFTB”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG055, pp. 2709-2711.
For LaTeX
Use Complete Form
For BibTeX
References
- M. K. Sullivan, K. J. Bertsche, S. Bettoni, E. Paoloni, P. Raimondi, and P. Vobly, “A New Interaction Region Design for the Super-B Factory”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB027, pp. 1581-1583.
- M. K. Fukuda et al., “Generation of Multi-bunch Beam with Beam Loading Compensation by Using RF Amplitude Modulation in Laser Undulator Compact X-ray (LUCX)”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1576-1578.
- B. Parker et al., “A Superconducting Magnet Upgrade of the ATF2 Final Focus”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE041, pp. 3440-3442.
- D. E. Anderson et al., “Design of a 1-MV Induction Injector for the Relativisitic Two-Beam Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W012, pp. 590-592.
- S. Braccini, “Compact Medical Cyclotrons and their use for Radioisotope Production and Multi-disciplinary Research”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 229-234.
- M. E. Inman et al., “Electropolishing of Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB101, pp. 390-393.
- R. Ferdinand et al., “SPIRAL2 Injector Commissioning”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 790-793.
- L. Celona et al., “The Proton Source for the European Spallation Source (PS-ESS): Installation and Commissioning at INFN-LNS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 39-42.
- R. E. Laxdal et al., “Initial Operating Experience with the Auxiliary Accelerating Cavity for the TRIUMF Cyclotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 810-813.
- B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52.
- S. F. Mikhailov, S. M. Hartman, J. Li, V. Popov, and Y. K. Wu, “Challenges for the Energy Ramping in a Compact Booster Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS015, pp. 1212-1214.
- D. Moffat et al., “Use of Ferrite-50 to Strongly Damp Higher Order Modes”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 664-667.
- D. Voulot et al., “HIE-ISOLDE SC Linac: Operational Aspects and Commissioning Preparation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP050, pp. 3853-3855.
- A. Castilla, J. R. Delayen, T. Satogata, and V. S. Morozov, “Modeling Crabbing Dynamics in an Electron-Ion Collider”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2333-2335.
- R. C. York, J. S. McCarthy, B. E. Norum, and J. C. Sheppard, “A Proposal for a High Current, High Duty Factor Electron Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2080-2083.
- M. A. C. Cummings and L. L. Bandura, “Novel Techniques for Isotope Harvesting at FRIB”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD031, pp. 1470-1472.
- R. Baartman, R. Laxdal, R. Lee, and G. H. Mackenzie, “Beam Optics for a 12-GeV Isochronous Ring Cyclotron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2010-2013.
- R. Bartolini et al., “Engineering Integration Constraints on the Beam Physics Optimisation of the DDBA Lattice for Diamond”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 322-324.
- S. Fu, H. C. Liu, H. F. Ouyang, S. Wang, J. Li, and J. Peng, “CSNS Front End and Linac Commissioning”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. XX-XX.
- D. Sprehn, G. Caryotakis, E. Jongewaard, and R. M. Phillips, “Periodic Permanent Magnet Development for Linear Collider X-Band Klystrons”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper WE1005, pp. 689-696.
- H. A. Martirosyan, W. Bothe, V. P. Goncharenko, O. A. Gusev, V. Ts. Nikogosyan, and K. A. Sadoyan, “Magnetic Field Flat-Top of Yerevan Synchrotron”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1220-1222.
- M. S. Bakeman et al., “Undulator-based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP161, pp. 397-399.
- O. H. Altenmueller et al., “Beam Break-Up Experiments at SLAC”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VI-02, pp. 267-280.
- W. Bothe, “Active Filter for the DESY III Dipole Circuit”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 932-935.
- M. Bai et al., “RHIC Spin Flipper Status and Simulation Studies”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP191, pp. 447-449.
- M. Lamont et al., “The LHC Sector Test”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS012, pp. 559-561.
- F. Furuta et al., “RF Test Result of a BNL N-Doped 500 MHz B-Cell Cavity at Cornell”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2440-2442.
- B. Hong, R. Akre, and V. Pacak, “LLRF System Upgrade for the SLAC Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA061, pp. 1473-1475.
- S. Usherovich et al., “A novel fiber-optic beam monitor”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM134, pp. 3890-3892.
- F. Antoniou et al., “Intrabeam Scattering Studies at the Swiss Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR057, pp. 1951-1953.
- S. U. De Silva, A. Castilla, and J. R. Delayen, “Compact Superconducting RF-dipole Cavity Designs for Deflecting and Crabbing Applications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO080, pp. 2483-2485.
- Y. Fukui et al., “Design of an Optical Diffraction Radiation Beam Size Monitor at SLAC FFTB”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG055, pp. 2709-2711.
Back to search