Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Hessami, A. Knetsch, D. Reis, J. Wang, and S. Meuren, “E-320 at SLAC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR35, unpublished.
[n] Y. Higurashi et al., “Developments of RIKEN New Superconducting ECR Ion Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC060, pp. 4191-4193.
[n] N. Gambino et al., “Status of helium ion beams commissioning at MedAustron ion therapy center”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1637-1640. doi:10.18429/JACoW-IPAC2024-TUPS06
[n] D. Yu, A. Baxter, P. Chen, M. Lundquist, and Y. Luo, “Thermal Hydraulic Design of PWT Accelerating Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE038, pp. 2524-2526.
[n] R. Zhang, H. K. Kumano, N. Toyotomi, M. Yoshida, and X. Zhou, “Laser System for SuperKEKB RF Gun in Phase III Commissioning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2914-2916. doi:10.18429/JACoW-IPAC2022-THPOTK059
[n] H. Zen et al., “Experimental Study on Effect of Energy Distribution on Transverse Phase Space Tomography”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH039, pp. 668-671.
[n] F. Saeidi, Z. Azami, E. Ahmadi, K. Noori, and A. Tafrihi, “Conceptual design of multipole injection kicker magnets for the ILSF storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3643-3645. doi:10.18429/JACoW-IPAC2023-WEPM039
[n] K. Yamada et al., “Status of the Superconducting Ring Cyclotron at RIKEN RI Beam Factory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP069, pp. 3518-3520.
[n] H. Fadil et al., “Design and Commissioning of a Compact Electron Cooler for the S-LSR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS064, pp. 1639-1641.
[n] S. Sanaye Hajari, S. Zarei, and S. F. masoudi, “Beam Dynamic study of the accelerating cavity of the dual energy NSTRI-eLinac”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS014, unpublished.
[n] C.-K. Ng, T. Weiland, D. Martin, S. Smith, and N. Kurita, “Simulation of PEP-II Beam Position Monitors”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ15, pp. 2485-2487.
[n] N. Tokuda, H. Sato, K. Marutsuka, and M. J. Shirakata, “THE MAGNET ALIGNMENT OF THE KEK-PS MAIN RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP054, pp. XX-XX.
[n] M. Lund and J. Barnard, “Theory of Longitudinal Beam Halo in RF Linacs: II. Envelope-Particle Resonances”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V020, pp. 1932-1934.
[n] M. K. Fujimaki, M. Kase, A. Uchiyama, and M. Komiyama, “Status of Control System for RIKEN RI-Beam Factory”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB11, pp. 187-189.
[n] H. Sato, T. Kubo, K. Marutsuka, Y. Saito, M. Shirakata, and N. Tokuda, “Experience of the Erosion-Corrosion Problems in the Main Ring Cooling Water System at the KEK-PS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH093, pp. 1426-1428.
[n] R. Robles, C. Emma, R. M. Hessami, K. Larsen, and A. Marinelli, “Generating Sub-Femtosecond Electron Beams at Plasma Wakefield Accelerators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2217-2220. doi:10.18429/JACoW-IPAC2022-WEPOTK064
[n] T. Shirai et al., “Lattice Design and Cooling Simulation at S-LSR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT116, pp. 2122-2124.
[n] Y. Sato et al., “Design of the Low Energy Beam Transport in RIKEN New Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB023, pp. 3936-3938.
[n] H. Imao, “Realization of New Charge-state Stripper for High-power Uranium Ion Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPPA01, pp. 3135-3138.
[n] I. Yamane, M. Nakamura, and H. Okuno, “Laser Recycler Using An Asymmetrical Con-focal Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA034, pp. 1402-1404.
[n] J. Biernat, “Modern electron beam diagnostic techniques based on LOCO and feed forward artificial neural networks.”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC59, unpublished.
[n] T. Hotei, R. Kato, and T. Miyajima, “Evaluation of 60pC Beam Performance at cERL Injector for ERL Based EUV-FEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 699-701. doi:10.18429/JACoW-LINAC2018-THPO009
[n] O. A. Tanaka, T. Miyajima, N. Nakamura, and T. Tanikawa, “Injector Design Towards ERL-Based EUV-FEL for Lithography”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2299-2302. doi:10.18429/JACoW-IPAC2022-WEPOMS025
[n] D. Caiazza, A. Gubertini, D. Castronovo, and M. Modica, “Magnetic measurement systems for Elettra 2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3631-3634. doi:10.18429/JACoW-IPAC2023-WEPM034
[n] H. Sato, M. Shirakata, K. Marutsuka, N. Tokuda, and S. Yamanaka, “Floor Level Fluctuation in the KEK-PS Tunnel”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D071, pp. 263-265.
[n] S. Matsumoto et al., “The Status of Nextef; The X-band Test Facility in KEK”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP053, pp. 906-908.
[n] P. J. Niedermayer, R. N. Geißler, and R. Singh, “Software Defined Radio Based Feedback System for Transverse Beam Excitation”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 306-307. doi:10.18429/JACoW-IBIC2023-WE2C02
[n] S. Chauhan, A. Edelen, C. Emma, and S. Gessner, “Modeling and optimization of the FACET-II injector with machine learning algorithms”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 913-916. doi:10.18429/JACoW-IPAC2024-MOPS79
[n] B. Yu. Bogdanovich, V. V. Kapin, and A. V. Nesterovich, “CHARGING OF A SPHERICAL HIGH-VOLTAGE TERMINAL BY PARTICLE BEAM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP04, pp. XX-XX.
[n] D. J. Xiao, C. P. Chu, and Y. S. Qiao, “Orbit Correction With Machine Learning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2608-2610. doi:10.18429/JACoW-IPAC2019-WEPGW058
For LaTeX
Use Complete Form
For BibTeX
References
- R. Hessami, A. Knetsch, D. Reis, J. Wang, and S. Meuren, “E-320 at SLAC”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR35, unpublished.
- Y. Higurashi et al., “Developments of RIKEN New Superconducting ECR Ion Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC060, pp. 4191-4193.
- N. Gambino et al., “Status of helium ion beams commissioning at MedAustron ion therapy center”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS06, pp. 1637-1640.
- D. Yu, A. Baxter, P. Chen, M. Lundquist, and Y. Luo, “Thermal Hydraulic Design of PWT Accelerating Structures”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE038, pp. 2524-2526.
- R. Zhang, H. K. Kumano, N. Toyotomi, M. Yoshida, and X. Zhou, “Laser System for SuperKEKB RF Gun in Phase III Commissioning”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2914-2916.
- H. Zen et al., “Experimental Study on Effect of Energy Distribution on Transverse Phase Space Tomography”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH039, pp. 668-671.
- F. Saeidi, Z. Azami, E. Ahmadi, K. Noori, and A. Tafrihi, “Conceptual design of multipole injection kicker magnets for the ILSF storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM039, pp. 3643-3645.
- K. Yamada et al., “Status of the Superconducting Ring Cyclotron at RIKEN RI Beam Factory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP069, pp. 3518-3520.
- H. Fadil et al., “Design and Commissioning of a Compact Electron Cooler for the S-LSR”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS064, pp. 1639-1641.
- S. Sanaye Hajari, S. Zarei, and S. F. masoudi, “Beam Dynamic study of the accelerating cavity of the dual energy NSTRI-eLinac”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS014, this conference.
- C.-K. Ng, T. Weiland, D. Martin, S. Smith, and N. Kurita, “Simulation of PEP-II Beam Position Monitors”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ15, pp. 2485-2487.
- N. Tokuda, H. Sato, K. Marutsuka, and M. J. Shirakata, “THE MAGNET ALIGNMENT OF THE KEK-PS MAIN RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP054, pp. XX-XX.
- M. Lund and J. Barnard, “Theory of Longitudinal Beam Halo in RF Linacs: II. Envelope-Particle Resonances”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V020, pp. 1932-1934.
- M. K. Fujimaki, M. Kase, A. Uchiyama, and M. Komiyama, “Status of Control System for RIKEN RI-Beam Factory”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB11, pp. 187-189.
- H. Sato, T. Kubo, K. Marutsuka, Y. Saito, M. Shirakata, and N. Tokuda, “Experience of the Erosion-Corrosion Problems in the Main Ring Cooling Water System at the KEK-PS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH093, pp. 1426-1428.
- R. Robles, C. Emma, R. M. Hessami, K. Larsen, and A. Marinelli, “Generating Sub-Femtosecond Electron Beams at Plasma Wakefield Accelerators”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2217-2220.
- T. Shirai et al., “Lattice Design and Cooling Simulation at S-LSR”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT116, pp. 2122-2124.
- Y. Sato et al., “Design of the Low Energy Beam Transport in RIKEN New Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB023, pp. 3936-3938.
- H. Imao, “Realization of New Charge-state Stripper for High-power Uranium Ion Beams”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPPA01, pp. 3135-3138.
- I. Yamane, M. Nakamura, and H. Okuno, “Laser Recycler Using An Asymmetrical Con-focal Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA034, pp. 1402-1404.
- J. Biernat, “Modern electron beam diagnostic techniques based on LOCO and feed forward artificial neural networks.”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC59, unpublished.
- T. Hotei, R. Kato, and T. Miyajima, “Evaluation of 60pC Beam Performance at cERL Injector for ERL Based EUV-FEL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 699-701.
- O. A. Tanaka, T. Miyajima, N. Nakamura, and T. Tanikawa, “Injector Design Towards ERL-Based EUV-FEL for Lithography”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2299-2302.
- D. Caiazza, A. Gubertini, D. Castronovo, and M. Modica, “Magnetic measurement systems for Elettra 2.0”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM034, pp. 3631-3634.
- H. Sato, M. Shirakata, K. Marutsuka, N. Tokuda, and S. Yamanaka, “Floor Level Fluctuation in the KEK-PS Tunnel”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D071, pp. 263-265.
- S. Matsumoto et al., “The Status of Nextef; The X-band Test Facility in KEK”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP053, pp. 906-908.
- P. J. Niedermayer, R. N. Geißler, and R. Singh, “Software Defined Radio Based Feedback System for Transverse Beam Excitation”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WE2C02, pp. 306-307.
- S. Chauhan, A. Edelen, C. Emma, and S. Gessner, “Modeling and optimization of the FACET-II injector with machine learning algorithms”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS79, pp. 913-916.
- B. Yu. Bogdanovich, V. V. Kapin, and A. V. Nesterovich, “CHARGING OF A SPHERICAL HIGH-VOLTAGE TERMINAL BY PARTICLE BEAM”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUIP04, pp. XX-XX.
- D. J. Xiao, C. P. Chu, and Y. S. Qiao, “Orbit Correction With Machine Learning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2608-2610.
Back to search