JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	P. Pugnat, T. Schreiner, and A. Siemko, “Investigation of the Periodic Magnetic Field Modulation inside Apertures of LHC Superconducting Dipole Models”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A03, pp. 2151-2153. 
[n]	M. Ikegami and S. Machida, “Coherent Mode Analysis of High Intensity Beams in Synchrotrons”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOB02A, pp. 282-286. 
[n]	C. J. Richard, S. Cogan, and S. M. Lidia, “Bunch Length Measurements Using Beam Position Monitors”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP20, unpublished. 
[n]	A. Dacc?á et al., “Niobium Titanium Nitride for Superconducting Accelerating Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D33, pp. 1103-1109. 
[n]	C. M. Cheng et al., “Measurement of the Pressure in the TPS Booster Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3685-3687. doi:10.18429/JACoW-IPAC2016-THPMY015
[n]	H. Zhang, “Experimental Polarization Control of Thomson Scattering X-ray Source”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 176-178. doi:10.18429/JACoW-SAP2017-WEBH3
[n]	P.-A. Duperrex, P. Baumann, S. Joray, D. C. Kiselev, Y. Lee, and U. M??ller, “Design and Operation of a Current Monitor under Heavy Heat Load”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD20, pp. 336-338. 
[n]	E. F. Valderrama et al., “Mo-Re Films for SRF Applications”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO077, pp. 930-935. 
[n]	H. Huang et al., “RHIC Operation with Longitudinally Polarized Protons”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT167, pp. 920-922. 
[n]	T. Miura et al., “Evaluation of LLRF Stabilities at STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP084, pp. 2207-2209. 
[n]	A. Deyhim, J. D. Kulesza, C. Diao, and H. O. Moser, “Development of a Super-Mini Undulator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP239, pp. 1274-1276. 
[n]	B. P. Wang, Z. C. Chen, Y. B. Leng, L. Y. Yu, R. X. Yuan, and W. M. Zhou, “Design of RF Front End for Cavity Beam Position Monitor based on ICs”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA22, pp. 383-385. 
[n]	T.-C. Yu et al., “Development of a 500 MHz Solid-state RF Amplifier as a Combination of Ten Modules”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 563-566. doi:10.18429/JACoW-IPAC2016-MOPMY031
[n]	S. Michizono et al., “Vector-Sum Control of Superconducting RF Cavities at STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP083, pp. 2204-2206. 
[n]	A. F. Balzer, E. Schierle, E. Suljoti, M. Witt, and R. Follath, “Status of the Continuous Mode Scan for Undulator Beamlines at BESSY II”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1091-1095. doi:10.18429/JACoW-ICALEPCS2015-THHA3O02
[n]	F. Tamura et al., “Simulations of Beam Loading Compensation in a Wideband Accelerating Cavity Using a Circuit Simulator Including a LLRF Feedback Control”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2863-2866. doi:10.18429/JACoW-IPAC2019-WEPRB026
[n]	B. C. Jiang, J. H. Chen, Q. L. Zhang, and Z. T. Zhao, “Using a Bessel Light Beam as an Ultra-short Period Helical Undulator”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 121-123. doi:10.18429/JACoW-SAP2017-TUAH4
[n]	Y.-S. Cho et al., “Installation of 100-MeV Proton Linac for PEFP”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP043, pp. 3832-3834. 
[n]	A. Fisher et al., “Lessons learned in commissioning the new beam-loss monitors for the superconducting upgrade to LCLS”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 593-598. doi:10.18429/JACoW-IBIC2025-WEBC02
[n]	O. A. Tarvainen, R. Keller, and G. Rouleau, “Helicon Plasma Generator-assisted H- Ion Source Development at Los Alamos Neutron Science Center”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS064, pp. 1802-1804. 
[n]	A. Shkvarunets, D. W. Feldman, J. Harris, J. Neumann, P. G. O'Shea, and R. Fiorito, “The Application of OTR-ODR Interferometry to the Measurement of the Divergence of Low Energy Electron Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH028, pp. 1285-1287. 
[n]	A. Liu, C.-J. Jing, and J. H. Shao, “Beam Experiments with the Multi-purpose Iris Diaphragm Beam Detector”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP34, unpublished. 
[n]	M. S. Zisman, R. B. Yourd, and H. Hsieh, “Design of the PEP-II Low-Energy Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA05, pp. 533-535. 
[n]	S. Choroba and V. V. Katalev, “Tuning of External Q And Phase for The Cavities of A Superconducting Linear Accelerator”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP51, pp. 724-726. 
[n]	E. Ciapala, S. Myers, and C. Wyss, “Phase Displacement Acceleration of High Intensity Stacks in the Cern ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1431-1434. 
[n]	K. T. Hsu, K. H. Hu, C. H. Kuo, W. K. Lau, C. J. Wang, and M. S. Yeh, “Architecture of Longitudinal Feedback Software System in TLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B03, pp. 1915-1917. 
[n]	K. Ozeki, Y. Higurashi, T. Nakagawa, and J. Ohnishi, “Emittance Measurements for U Ion Beams Produced from RIKEN 28 GHz SC-ECRIS”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEPP08, pp. 130-132. 
[n]	Z. Wu, K. Z. Ding, J. Li, Y. Song, and Z. Wang, “Beam Dynamics Simulation of the Extraction for a Superconducting Cyclotron SC240”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 31-34. doi:10.18429/JACoW-CYCLOTRONS2019-MOP004
[n]	B. Beutner and S. Reiche, “Operation Modes and Longitudinal Layout for the SwissFEL Hard X-Ray Facility”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPA19, pp. 235-238. 
[n]	A. Mapar, F. Pourboghrat, T. R. Bieler, and C. Compton, “Dynamic Hardening Rule; a Generalization of the Classical Hardening Rule for Crystal Plasticity”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP037, pp. 499-503. 
[n]	E. Zimoch and A. Luedeke, “Purpose and Benefit of Control System Training for Operators”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THBHAUST03, pp. 1186-1188. 
[n]	B. Beutner and S. Reiche, “Sensitivity and Tolerance Study for the SwissFEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB17, pp. 437-440. 
[n]	V. M. Pugatch, O. S. Kovalchuk, and D. Ramazanov, “Features of the Metal Microstrip Detectors for Beam Profile Monitoring”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 211-214. doi:10.18429/JACoW-IBIC2020-THAO06
[n]	A. Goswami, V. S. Pandit, and P. Sing Babu, “Feasibility Study of Intense Beam Matching at the Spiral Inflector Using Elliptical Solenoid”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT004, pp. 326-328. 
[n]	M. K. Kim, J. S. Hong, and T. H. Tak, “The Implementation of KSTAR Fast Interlock System using C-RIO”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 337-340. doi:10.18429/JACoW-ICALEPCS2017-TUMPA03
[n]	J. Neumann et al., “Beam Line Design at the Maryland Infrared Free Electron Laser (MIRFEL)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH124, pp. 2766-2768. 
[n]	J. Y. Li, C. Diao, W. Li, G. Liu, Z. P. Liu, and B. G. Sun, “Closed Orbit Correction of HLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH011, pp. 1255-1257. 
[n]	M. Behtouei, M. Migliorati, and M. Zobov, “Wakefield analysis of the FCC-ee collimation system”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR71, unpublished. 
[n]	G. Kube et al., “Micron-Scale Vertical Beam Size Measurements Based on Transition Radiation Imaging With a Schwarzschild Objective”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 327-329. doi:10.18429/JACoW-IBIC2015-TUPB011
[n]	J. W. Rathke, “Parametric Study of Emerging High Power Accelerator Applications using Accelerator Systems Model (ASM)”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP50, pp. 456-460. 
[n]	D. Kayran et al., “Beam Commissioning Results From the R&D ERL at BNL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 374-379. doi:10.18429/JACoW-LINAC2016-TU3A01
[n]	A. Kotarba, M. Bednarek, P. Jurkiewicz, J. Ludwin, M. Talach, and R. Mompo, “Automatic Measurement System for Electrical Verification of the LHC Superconducting Circuits”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS093, pp. 1756-1758. 
[n]	J. D. Herbert and R. J. Reid, “The Impact of Environmental Protection Legislation on Cleaning Procedures for Accelerator Vacuum Systems”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2529-2532. 
[n]	H. Nagoshi et al., “A Design Study of the Electron-driven ILC Positron Source Including Beam Loading Effect”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 311-314. doi:10.18429/JACoW-IPAC2018-MOPMF077
[n]	B. Barquest et al., “Development and Installation of the CANREB RFQ Buncher at TRIUMF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3914-3916. doi:10.18429/JACoW-IPAC2018-THPAL116
[n]	A. A. Glazov, V. A. Kochkin, D. L. Novikov, and L. M. Onischenko, “The RF System of the Monoenergetic Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69D18, pp. XX-XX. 
[n]	C. R. Ader, M. L. Alvarez, J. S. Batko, R. Campos, M. W. McGee, and A. C. Watts, “Accelerator Vacuum Windows: A Review of Past Research and a Strategy for the Development of a New Design for Improved Safety and Longevity for Particle Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2237-2239. doi:10.18429/JACoW-IPAC2019-WEXXPLS2
[n]	C. N. Davids and D. Peterson, “A Compact High-Resolution Isobar Separator for the CARIBU Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP116, pp. 5050-5052. 
[n]	P. A. Piminov et al., “Accelerator Physics Activity at the VEPP-4M Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP029, pp. 4012-4014. 
[n]	I. Hofmann and K. Beckert, “Resonance Crossing in the Presence of Space Charge”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2264-2267. 
[n]	R. B. Deng, F. Gao, and L. Yin, “Ground Vibration Monitoring for SXFEL Construction at SSRF”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 242-245. doi:10.18429/JACoW-MEDSI2016-TUPE36
[n]	E. N. Beebe et al., “Extended EBIS Development at BNL”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper WE2WH01, unpublished. 
[n]	F. Zimmermann et al., “A Final Focus System for the Next Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC06, pp. 707-709. 
[n]	C. H. Ho et al., “High Power Test of the First S-Band RF Gun at SRRC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH310, pp. 2423-2425. 
[n]	D. Igarashi, A. Endo, K. Sakaue, T. Takahashi, and M. Washio, “Direct High Power Laser Diagnostic Technique on Focused Electron Bunch”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4073-4075. doi:10.18429/JACoW-IPAC2016-THPOW057
[n]	M. Br?ñger, M. Brightwell, E. Koufakis, R. Martini, and A. Suwalska, “High-Availability Monitoring and Big Data: Using Java Clustering and Caching Technologies to Meet Complex Monitoring Scenarios”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC140, pp. 439-442. 
[n]	S. R. Uglov, A. Potylitsyn, L. G. Sukhikh, A. V. Vukolov, and G. Kube, “EUV Radiation Generated by a 5.7 MeV Electron Beam in Multilayer Periodical Structure”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3503-3505. doi:10.18429/JACoW-IPAC2014-THPME115
[n]	F.-T. Chung et al., “Design and Upgrade the Safety System for the SRF Electronic System at the Taiwan Photon Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 567-569. doi:10.18429/JACoW-IPAC2016-MOPMY032
[n]	F.-T. Chung and F.-Y. Chang, “Construction and Installation of a 320kW Solid State Power Amplifier for Taiwan Photo Source.”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM023, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search