JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	L. Giannessi et al., “FERMI@Elettra Status Report”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO22, pp. 546-549. 
[n]	M. Marino, “Study of NbTiN Coatings by Reactive Magnetron Sputtering for the Production of 1.5 GHz Superconducting Accelerating Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D29, pp. 1074-1080. 
[n]	W. Fischer et al., “Vacuum Pressure Rise with Intense Ion Beams in RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI034, pp. 1485-1487. 
[n]	P. C. Chiu, K. T. Hsu, K. H. Hu, and C. H. Kuo, “TPS BPM Electronics Performance Measurement and Statistics”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA17, pp. 369-373. 
[n]	B. A. Bowling, H. Shoaee, J. van Zeijts, S. Witherspoon, and W. Watson, “Integrated On-Line Accelerator Modeling at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE10, pp. 2181-2183. 
[n]	C. Chu and T. A. Pelaia, “Beam Trajectory Correction for SNS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT015, pp. 1425-1427. 
[n]	D. B. Belohrad, S. Longo, OP. Odier, and S. Thoulet, “Mechanical Design of the Intensity Measurement Devices for the LHC”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB09, pp. 253-255. 
[n]	W. Fischer, M. Blaskiewicz, R. Calaga, P. Cameron, Y. Luo, and T. Pieloni, “Transverse Beam Transfer Functions of Colliding Beams in RHIC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS094, pp. 1856-1858. 
[n]	J. Bisognano et al., “A Superconducting Linac Driver for the Wisconsin Free Electron Laser”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS042, pp. 1281-1283. 
[n]	G. Ganetis and A. Prodell, “Results from Heater-Induced Quenches of a 4.5m Two-in-One Superconducting R&D Dipole for the SSC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3678-3681. 
[n]	J. Herrera, G. Ganetis, R. Hogue, E. Rogers, P. Wanderer, and E. Willen, “Measurement of the Magnetic Field Coefficients of Particle Accelerator Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1774-1777. 
[n]	T. Bohl, T. Linnecar, and E. Shaposhnikova, “Study of a Single-bunch Instability below Transition Energy”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A11, pp. 1173-1175. 
[n]	J. F. Chen, M. Moretti, C. Pagani, and P. Pierini, “Improvements of Buildcavity Code”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB006, pp. 1070-1072. 
[n]	J. Makita, G. Ciovati, and P. Dhakal, “Temperature Mapping of Nitrogen-doped Niobium Superconducting Radiofrequency Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3575-3577. doi:10.18429/JACoW-IPAC2015-WEPWI038
[n]	S. E. Karnaev, D. Bolkhovityanov, P. B. Cheblakov, Y. I. Eidelman, and A. V. Makeev, “Two-level Channel Model in Three-level Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP014, pp. XX-XX. 
[n]	Y. Z. He, L. Wang, and Q. G. Zhou, “The Research on Magnetic Properties of Magnet for SSRF Cryogenic Permanent Magnet Undulator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP075, pp. 735-737. 
[n]	J. Dehen, W. Barth, H. Deitinghoff, and A. Schempp, “Transport of Ions in a RFQ Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 967-970. 
[n]	P.-E. Bernaudin et al., “Results of the IPHI Drift Tube Linac's Hot Model CW Tests”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB033, pp. 2799-2801. 
[n]	P.-C. Chiu et al., “TPS fast orbit feedback upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4794-4797. doi:10.18429/JACoW-IPAC2023-THPL140
[n]	D. Arbelaez, A. Madur, S. Marks, S. Prestemon, D. Schlueter, and H.-D. Nuhn, “Error Analysis for Hybrid Undulators”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA24, pp. 387-390. 
[n]	C. H. Kuo et al., “The Profile Measurement of Synchrotron Radiation Monitor in NSRRC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP581, pp. XX-XX. 
[n]	D. S. Vorobev et al., “Accelerators of ELV Series: Current Status and Further Development”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 111-113. doi:10.18429/JACoW-RuPAC2021-FRB02
[n]	H. Rafique, R. J. Barlow, R. B. Appleby, S. C. Tygier, R. Bruce, and S. Redaelli, “MERLIN for LHC Collimation”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 37-39. doi:10.18429/JACoW-ICAP2015-TUCBC1
[n]	Z. Zhao, C. H. Wang, G. Lei, J. Zhao, K. J. Yue, and J. Liu, “Realization of Linux Platform in Distributed Control System by EPICS at BEPCII”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP525, pp. XX-XX. 
[n]	J. Y. Hwang et al., “Preinjector Performance Improvement in NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16045, pp. XX-XX. 
[n]	P. Dhakal, G. Ciovati, P. Kneisel, G. R. Myneni, and J. Makita, “Nitrogen Doping Study in Ingot Niobium Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3506-3508. doi:10.18429/JACoW-IPAC2015-WEPWI009
[n]	G. Zhao, Y. Huang, J. LI, Y. Liu, X. Qi, and W. Zhang, “Reliability analysis of digital controller for magnet power supply based on optocoupler failure”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3766-3768. doi:10.18429/JACoW-IPAC2023-WEPM083
[n]	F. Ghasemi, F. AbbasiDavani, S. Ahmadiannamini, M. Shafiee, M. L. Lamehi Rashti, and H. Shaker, “Construction of Disk-loaded Buncher for S-Band Low Energy TW Electron Linear Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD063, pp. 2666-2668. 
[n]	J. R. Shi, H. B. Chen, C. X. Tang, S. X. Zheng, and D. Li, “Impedance Simulation and Waveguide Damping Study of a Superconducting Deflecting Cavity for ALS at LBNL”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP35, pp. XX-XX. 
[n]	W. K. Lau et al., “A New Kicker for the TLS Longitudinal Feedback System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP005, pp. 949-951. 
[n]	T. Galek, K. Brackebusch, Sh. Gorgi Zadeh, and U. van Rienen, “Study of Higher Order Modes in Multi-Cell Cavities for BESSY-VSR Upgrade”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 412-414. doi:10.18429/JACoW-IPAC2014-MOPME017
[n]	Y. Furukawa, T. Fujita, M. Ishii, and T. Matsumoto, “MADOCA II Interface for LabVIEW”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC129, pp. 410-412. 
[n]	P. Dhakal, G. Ciovati, P. Kneisel, and G. R. Myneni, “Reproducibility of High-Q SRF Cavities by High Temperature Heat Treatment”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2651-2653. doi:10.18429/JACoW-IPAC2014-WEPRI069
[n]	G. Ciovati, P. Dhakal, P. Kneisel, J. D. Mammosser, J. Matalevich, and G. R. Myneni, “Mechanical Properties of Ingot Nb Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2654-2656. doi:10.18429/JACoW-IPAC2014-WEPRI070
[n]	M. Ishii, T. Masuda, R. Tanaka, and A. Yamashita, “The Gateways of Facility Control for SPring-8 Accelerators”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU019, pp. 473-476. 
[n]	J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, F. Sch?ñfers, and G. W??stefeld, “Mini-beta Sections in the Storage Ring BESSY II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD011, pp. 3108-3110. 
[n]	F. Giacuzzo et al., “Equipment and Machine Protection Systems for the FERMI@Elettra FEL facility”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU025, pp. 1119-1121. 
[n]	G. Ciovati, P. Dhakal, J. Matalevich, and G. R. Myneni, “Mechanical Properties of Niobium Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3554-3557. doi:10.18429/JACoW-IPAC2015-WEPWI032
[n]	H. von Jagwitz-Biegnitz, P. Beasley, O. Heid, T. Kluge, D. C. Faircloth, and R. G. Selway, “Automated Conditioning System for Siemens Novel Electrostatic Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3825-3827. doi:10.18429/JACoW-IPAC2014-THPRI027
[n]	V. Skalyga et al., “Gasdynamic ECR Sources of Multicharged Ions”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper TUCO-A02, pp. 128-130. 
[n]	K. Torgasin et al., “Coaxial Quarter Wavelength Impedance Converter for Coupling Control of Triode Cavity”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 689-691. doi:10.18429/JACoW-RUPAC2016-THPSC067
[n]	P. Beasley and O. Heid, “Construction of a Novel Compact High Voltage Electrostatic Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS079, pp. 1722-1724. 
[n]	J. LI, G. Zhao, W. Zhang, X. Qi, Y. Huang, and Y. Liu, “Program Design of Timing Signal Detection and Protection for CSNS/RCS Resonant Power Supply”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM074, unpublished. 
[n]	M. Roy and O. Kumar, “Jefferson Lab’s multi-purpose modular FPGA based controller board improves on project design cycle”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEP051, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search