Favourites
For Word
[n] M. Kreider, “The FAIR Timing Master: A Discussion of Performance Requirements and Architectures for a High-precision Timing System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST06, pp. 1256-1259.
[n] H. D. Glass et al., “Permanent Dipole Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P012, pp. 3257-3259.
[n] R. D. Scarpetti et al., “Status of DARHT 2nd Axis Accelerator at the Los Alamos National Laboratory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUXC01, pp. 831-835.
[n] A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155.
[n] G. V. Dolbilov et al., “Status of the Test Facility for Studies FEL Bunching Technique for CLIC Driving Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP057G, pp. 730-732.
[n] G. Rouse, R. Siemann, and M. Tigner, “Beam Modulator for an Electron Linac”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1473-1476.
[n] P. Ausset, L. Badano, J. Bosser, P. A. Chamouard, P. Knaus, and S. Rossi, “A Betatron Core for Optimised Slow Extraction in a Proton/Ion Medical Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10H, pp. 2368-2370.
[n] S. K. Esin et al., “Linear Accelerator for Production of Radioactive Beams”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-70, pp. 808-810.
[n] Y. V. Altukhov, E. Kashtanov, S. Kozub, and L. Tkachenko, “Results of Mechanical Analysis of Wide-Aperture Quadrupole Nodes for HED@FAIR Experiments”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 360-362. doi:10.18429/JACoW-RUPAC2018-WEPSB41
[n] T. J. Jones et al., “Development of a Novel Supporting System for High Luminosity LHC SRF Crab Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 304-308. doi:10.18429/JACoW-SRF2017-MOPB104
[n] M. Vogel, X. Jiang, P. Murcek, J. Schaber, C. Wang, and R. Xiang, “Initial Study of GaN Thin Films for Photocathodes Prepared by Magnetron Sputtering on Copper Substrates”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2850-2852. doi:10.18429/JACoW-IPAC2021-WEPAB109
[n] H. Churn, L. Jones, and T. Noakes, “Mean Transverse Energy and Degradation Measurements on a Caesium Telluride Photocathode”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1404-1407. doi:10.18429/JACoW-IPAC2023-TUPA030
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Architecture for Improving Software Reliability in Collider-Accelerator Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1261-1265. doi:10.18429/JACoW-ICALEPCS2017-THMPL03
[n] A. I. Kvasha and V. L. Serov, “Powerful RF Triode as Anode Modulator Vacuum Tube (Part Two)”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 378-381. doi:10.18429/JACoW-RUPAC2018-WEPSB50
[n] R. C. Wolgast, “Vacuum Cryopumping a Heavy Ion Source in a High Voltage Terminal”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 699-703.
[n] M. Hara, T. Fujisawa, and K. Ogiwara, “The RF System for the IPCR SSC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-11, pp. 411-413.
[n] M. Takao, H. Ego, Y. Kawashima, Y. Ohashi, T. Ohshima, and H. Saeki, “Observation of Ion Effects at the SPring-8 Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI037, pp. 1562-1564.
[n] K. Ammigan et al., “Experimental Results of Beryllium Exposed to Intense High Energy Proton Beam Pulses”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 102-105. doi:10.18429/JACoW-NAPAC2016-MOPOB14
[n] L. Liu et al., “Status of SIRIUS operation with users”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2586-2589. doi:10.18429/JACoW-IPAC2023-WEOGA2
For LaTeX
Use Complete Form
For BibTeX
References
- M. Kreider, “The FAIR Timing Master: A Discussion of Performance Requirements and Architectures for a High-precision Timing System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST06, pp. 1256-1259.
- H. D. Glass et al., “Permanent Dipole Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P012, pp. 3257-3259.
- R. D. Scarpetti et al., “Status of DARHT 2nd Axis Accelerator at the Los Alamos National Laboratory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUXC01, pp. 831-835.
- A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155.
- G. V. Dolbilov et al., “Status of the Test Facility for Studies FEL Bunching Technique for CLIC Driving Beam”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP057G, pp. 730-732.
- G. Rouse, R. Siemann, and M. Tigner, “Beam Modulator for an Electron Linac”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1473-1476.
- P. Ausset, L. Badano, J. Bosser, P. A. Chamouard, P. Knaus, and S. Rossi, “A Betatron Core for Optimised Slow Extraction in a Proton/Ion Medical Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP10H, pp. 2368-2370.
- S. K. Esin et al., “Linear Accelerator for Production of Radioactive Beams”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-70, pp. 808-810.
- Y. V. Altukhov, E. Kashtanov, S. Kozub, and L. Tkachenko, “Results of Mechanical Analysis of Wide-Aperture Quadrupole Nodes for HED@FAIR Experiments”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 360-362.
- T. J. Jones et al., “Development of a Novel Supporting System for High Luminosity LHC SRF Crab Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 304-308.
- M. Vogel, X. Jiang, P. Murcek, J. Schaber, C. Wang, and R. Xiang, “Initial Study of GaN Thin Films for Photocathodes Prepared by Magnetron Sputtering on Copper Substrates”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2850-2852.
- H. Churn, L. Jones, and T. Noakes, “Mean Transverse Energy and Degradation Measurements on a Caesium Telluride Photocathode”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA030, pp. 1404-1407.
- Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Architecture for Improving Software Reliability in Collider-Accelerator Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1261-1265.
- A. I. Kvasha and V. L. Serov, “Powerful RF Triode as Anode Modulator Vacuum Tube (Part Two)”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 378-381.
- R. C. Wolgast, “Vacuum Cryopumping a Heavy Ion Source in a High Voltage Terminal”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 699-703.
- M. Hara, T. Fujisawa, and K. Ogiwara, “The RF System for the IPCR SSC”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-11, pp. 411-413.
- M. Takao, H. Ego, Y. Kawashima, Y. Ohashi, T. Ohshima, and H. Saeki, “Observation of Ion Effects at the SPring-8 Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI037, pp. 1562-1564.
- K. Ammigan et al., “Experimental Results of Beryllium Exposed to Intense High Energy Proton Beam Pulses”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 102-105.
- L. Liu et al., “Status of SIRIUS operation with users”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGA2, pp. 2586-2589.
Back to search
