Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Juillard, B. Aune, B. Bonin, and L. Wartski, “Superconducting Surface Resistance Measurements with a TE011 Cavity”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1106-1109.
[n] M. Tobiyama et al., “Bunch by Bunch Feedback Systems for J-PARC MR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB036, pp. 2767-2769.
[n] A. Drago, M. M. Beretta, K. J. Bertsche, M. Migliorati, and A. Novokhatski, “Superb Bunch-by-bunch Feedback R&D”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB034, pp. 2761-2763.
[n] K. Mahoney, “Survey of Electronic Safety Systems in Accelerator Applications”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C008, pp. 3565-3567.
[n] B. Cauvin et al., “Fabrication, Tests, and RF Control of the 50 Superconducting Resonators of the Saclay Heavy Ion Linac”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87D02, pp. XX-XX.
[n] C. Betz et al., “The FAIR R3B Prototype Cryogenics Control System”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO007, pp. 46-48.
[n] A. Benton and C. Agritellis, “Space Charge Effects on Longitudinal Motion in Proton Linacs”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper V-09, pp. 243-244.
[n] M. Brown et al., “Design of a low-power proof-of-concept multi-stage amplifier test stand to model and implement outphasing control for the LANSCE 805 MHz solid-state high-power RF amplifier”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 725-729. doi:10.18429/JACoW-NAPAC2025-WEP020
[n] O. Beznosov, D. Appel?Â, D. P. Barber, J. A. Ellison, and K. A. Heinemann, “Spin Dynamics in Modern Electron Storage Rings: Computational Aspects”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 146-150. doi:10.18429/JACoW-ICAP2018-MOPAF04
[n] G. Geloni, V. Kocharyan, and E. Saldin, “Ultrafast X-Ray Pulse Measurement Method”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPA14, pp. 386-389.
[n] A. Dainelli, A. Facco, A. Lombardi, and E. A. Togun, “Beam Optics Progress for the ALPI Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1291-1294.
[n] H. Sakai et al., “Improvement of a Clean Assembly Work for Superconducting RF Cryomodule and Its Application to the KEK-STF Cryomodule”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 721-725. doi:10.18429/JACoW-SRF2019-TUP104
[n] F. Marcellini, D. Alesini, and A. Ghigo, “Kicker and Monitor for CTF3 Phase Feed Forward”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC007, pp. 1000-1002.
[n] J. Z. Zhou, C. Chen, and K. R. Samokhvalova, “Adiabatic Thermal Beam Equilibrium in an Alternating-Gradient Focusing Field”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP037, pp. 4387-4389.
[n] J. D. Schneider, “A Method For Calculating Near-Optimum Ion-Extractor Profiles”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS082, pp. 1841-1843.
[n] J. Gardelle, T. Lefevre, J. L. Rullier, and J. T. Donohue, “Proposal to Use PIVAIR as a 30 GHz High-Power Generator”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4014, pp. 794-796.
[n] T. Habermann, A. G?Âhl, D. Nau, G. M??ller, H. Piel, and M. Wedel, “Influence of Adsorbates and Surface Compounds on the Field Emission of Niobium”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D20, pp. 972-980.
[n] Q. Luo, Q. K. Jia, B. G. Sun, and Z. R. Zhou, “Design of Cavity Beam Quadrupole Moment Monitor at HLS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP176, pp. 417-419.
[n] D. Wang et al., “High Power RF Radiation at W-band Based on Wakefields Excited by Intense Electron Beam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2960-2962. doi:10.18429/JACoW-IPAC2015-WEPMN017
[n] G. Ciovati, S. G. Corcoran, and J. Halbritter, “Preliminary Results on Polarized" Buffered Chemical Polishing of a Large Grain Niobium Cavity"”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP17, pp. XX-XX.
[n] S. A. Lewis, “Computer Control of the Indiana Clyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1079-1082.
[n] M. Patil et al., “Status and upgrade of the visible light diagnostics port for energy spread measurements at KARA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4764-4767. doi:10.18429/JACoW-IPAC2023-THPL123
[n] S. H. Kim et al., “Development of a Short-Period Superconducting Undulator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG002, pp. 1020-1022.
[n] S. H. Kim, C. Doose, R. Kustom, E. R. Moog, and K. M. Thompson, “Experimental Study of the Stability Margin with Beam Heating in a Short-Period Superconducting Undulator for the APS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF068, pp. 470-472.
[n] G. Saxon, “A Proposed Lattice Modification to the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3136-3139.
[n] K. B. Beard, P. Degtiarenko, and T. J. Roberts, “G4Beamline Program for Radiation Simulations”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD017, pp. 481-483.
[n] J. Chavanne, C. Penel, B. Plan, and F. Revol, “Status of the ESRF Insertion Devices”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF032, pp. 372-374.
[n] J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, F. Sch?ñfers, and G. W??stefeld, “Mini-beta Sections in the Storage Ring BESSY II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD011, pp. 3108-3110.
[n] K. Pepitone, S. Doebert, B. Cadilhon, B. Cassany, and J. Gardelle, “LEETCHI: The High Current Electron Source for the CLIC Drive Beam Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 870-872. doi:10.18429/JACoW-LINAC2016-THPLR013
[n] F. Eoz?®nou, S. Chel, Y. Gasser, J. P. Poupeau, C. Servouin, and Z. Wang, “Vertical Electro-Polishing at CEA Saclay: Commissioning of a New Set-Up and Modeling of the Process Applied to Different Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO062, pp. 549-554.
[n] A. V. Ivanov, “WinSAM and WinMAG - New Program Packages for Simulation of Electron-Optical Systems”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 93-95. doi:10.18429/JACoW-COOL2019-TUPS07
[n] S. Jin, J. Gao, T. Omori, and P. Sievers, “Numerical Analysis of Stresses for the Target of the ILC 300 Hz Conventional Positron Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3838-3840. doi:10.18429/JACoW-IPAC2016-THPOR028
[n] S. Colmekci, M. Shapiro, and X. Lu, “Design and cold test of a novel waveguide power splitter for distributed power coupling in short-pulse acceleration”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 722-725. doi:10.18429/JACoW-NAPAC2025-WEP017
[n] J. Li, N. Solyak, and T. Wong, “Coupling Interaction Between the Power Coupler and the Third Harmonic Superconducting Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN101, pp. 2268-2270.
[n] W. C. Barry, P. K. Kloeppel, and R. Rossmanith, “Absolute Measurement of Beam Energy by Compton Scattering”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1136-1139.
[n] E. Goutierre, H. Guler, C. Bruni, M. Sebag, and J. Cohen, “Surrogate Model for Linear Accelerator: A fast Neural Network approximation of ThomX's simulator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4514-4517. doi:10.18429/JACoW-IPAC2023-THPL039
[n] S. Sapkota, D. Posthuma de Boer, and E. Yamakawa, “Development of a Faraday cup for the FETS-FFA”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 208-212. doi:10.18429/JACoW-IBIC2025-MOPMO14
For LaTeX
Use Complete Form
For BibTeX
References
- M. Juillard, B. Aune, B. Bonin, and L. Wartski, “Superconducting Surface Resistance Measurements with a TE011 Cavity”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1106-1109.
- M. Tobiyama et al., “Bunch by Bunch Feedback Systems for J-PARC MR”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB036, pp. 2767-2769.
- A. Drago, M. M. Beretta, K. J. Bertsche, M. Migliorati, and A. Novokhatski, “Superb Bunch-by-bunch Feedback R&D”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB034, pp. 2761-2763.
- K. Mahoney, “Survey of Electronic Safety Systems in Accelerator Applications”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8C008, pp. 3565-3567.
- B. Cauvin et al., “Fabrication, Tests, and RF Control of the 50 Superconducting Resonators of the Saclay Heavy Ion Linac”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87D02, pp. XX-XX.
- C. Betz et al., “The FAIR R3B Prototype Cryogenics Control System”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO007, pp. 46-48.
- A. Benton and C. Agritellis, “Space Charge Effects on Longitudinal Motion in Proton Linacs”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper V-09, pp. 243-244.
- M. Brown et al., “Design of a low-power proof-of-concept multi-stage amplifier test stand to model and implement outphasing control for the LANSCE 805 MHz solid-state high-power RF amplifier”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 725-729.
- O. Beznosov, D. Appel?Â, D. P. Barber, J. A. Ellison, and K. A. Heinemann, “Spin Dynamics in Modern Electron Storage Rings: Computational Aspects”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 146-150.
- G. Geloni, V. Kocharyan, and E. Saldin, “Ultrafast X-Ray Pulse Measurement Method”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPA14, pp. 386-389.
- A. Dainelli, A. Facco, A. Lombardi, and E. A. Togun, “Beam Optics Progress for the ALPI Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1291-1294.
- H. Sakai et al., “Improvement of a Clean Assembly Work for Superconducting RF Cryomodule and Its Application to the KEK-STF Cryomodule”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 721-725.
- F. Marcellini, D. Alesini, and A. Ghigo, “Kicker and Monitor for CTF3 Phase Feed Forward”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC007, pp. 1000-1002.
- J. Z. Zhou, C. Chen, and K. R. Samokhvalova, “Adiabatic Thermal Beam Equilibrium in an Alternating-Gradient Focusing Field”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP037, pp. 4387-4389.
- J. D. Schneider, “A Method For Calculating Near-Optimum Ion-Extractor Profiles”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS082, pp. 1841-1843.
- J. Gardelle, T. Lefevre, J. L. Rullier, and J. T. Donohue, “Proposal to Use PIVAIR as a 30 GHz High-Power Generator”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4014, pp. 794-796.
- T. Habermann, A. G?Âhl, D. Nau, G. M??ller, H. Piel, and M. Wedel, “Influence of Adsorbates and Surface Compounds on the Field Emission of Niobium”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D20, pp. 972-980.
- Q. Luo, Q. K. Jia, B. G. Sun, and Z. R. Zhou, “Design of Cavity Beam Quadrupole Moment Monitor at HLS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP176, pp. 417-419.
- D. Wang et al., “High Power RF Radiation at W-band Based on Wakefields Excited by Intense Electron Beam”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2960-2962.
- G. Ciovati, S. G. Corcoran, and J. Halbritter, “Preliminary Results on Polarized" Buffered Chemical Polishing of a Large Grain Niobium Cavity"”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP17, pp. XX-XX.
- S. A. Lewis, “Computer Control of the Indiana Clyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1079-1082.
- M. Patil et al., “Status and upgrade of the visible light diagnostics port for energy spread measurements at KARA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL123, pp. 4764-4767.
- S. H. Kim et al., “Development of a Short-Period Superconducting Undulator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG002, pp. 1020-1022.
- S. H. Kim, C. Doose, R. Kustom, E. R. Moog, and K. M. Thompson, “Experimental Study of the Stability Margin with Beam Heating in a Short-Period Superconducting Undulator for the APS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF068, pp. 470-472.
- G. Saxon, “A Proposed Lattice Modification to the Daresbury SRS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3136-3139.
- K. B. Beard, P. Degtiarenko, and T. J. Roberts, “G4Beamline Program for Radiation Simulations”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD017, pp. 481-483.
- J. Chavanne, C. Penel, B. Plan, and F. Revol, “Status of the ESRF Insertion Devices”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF032, pp. 372-374.
- J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, F. Sch?ñfers, and G. W??stefeld, “Mini-beta Sections in the Storage Ring BESSY II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD011, pp. 3108-3110.
- K. Pepitone, S. Doebert, B. Cadilhon, B. Cassany, and J. Gardelle, “LEETCHI: The High Current Electron Source for the CLIC Drive Beam Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 870-872.
- F. Eoz?®nou, S. Chel, Y. Gasser, J. P. Poupeau, C. Servouin, and Z. Wang, “Vertical Electro-Polishing at CEA Saclay: Commissioning of a New Set-Up and Modeling of the Process Applied to Different Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO062, pp. 549-554.
- A. V. Ivanov, “WinSAM and WinMAG - New Program Packages for Simulation of Electron-Optical Systems”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 93-95.
- S. Jin, J. Gao, T. Omori, and P. Sievers, “Numerical Analysis of Stresses for the Target of the ILC 300 Hz Conventional Positron Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3838-3840.
- S. Colmekci, M. Shapiro, and X. Lu, “Design and cold test of a novel waveguide power splitter for distributed power coupling in short-pulse acceleration”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 722-725.
- J. Li, N. Solyak, and T. Wong, “Coupling Interaction Between the Power Coupler and the Third Harmonic Superconducting Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN101, pp. 2268-2270.
- W. C. Barry, P. K. Kloeppel, and R. Rossmanith, “Absolute Measurement of Beam Energy by Compton Scattering”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1136-1139.
- E. Goutierre, H. Guler, C. Bruni, M. Sebag, and J. Cohen, “Surrogate Model for Linear Accelerator: A fast Neural Network approximation of ThomX's simulator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL039, pp. 4514-4517.
- S. Sapkota, D. Posthuma de Boer, and E. Yamakawa, “Development of a Faraday cup for the FETS-FFA”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 208-212.
Back to search