Favourites
For Word
[n] T. Kanesue et al., “The Commissioning of the Laser Ion Source for RHIC-EBIS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1890-1892. doi:10.18429/JACoW-IPAC2014-WEOAB01
[n] M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
[n] C. Bruni et al., “High Level Control Command for ThomX Transfer Line”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 830-832. doi:10.18429/JACoW-IPAC2016-MOPOW051
[n] I. Ito, Y. Honda, Y. Kobayashi, N. Nakamura, K. Torizuka, and D. Yoshitomi, “Development of an Yb-doped Fiber Laser System for an ERL Photocathode Gun”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD104, pp. 2141-2143.
[n] J. E. Clendenin, M. J. Browne, R. A. Gearhart, J. C. Sheppard, and J. Sodja, “Timing Stabilization for the SLC Electron Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 369-372.
[n] S. Krecic, A. Carniel, and F. Tripaldi, “Emittance reduction of the actual Booster for Elettra2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3155-3157. doi:10.18429/JACoW-IPAC2023-WEPL022
[n] R. Geller, P. Briand, B. Jacquot, P. Ludwig, G. Melin, and M. Pontonnier, “ECR Ion Sources for Accelerators”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE4-02, pp. 455-459.
[n] D. L. Rubin, R. E. Meller, and J. P. Shanks, “Low Emittance Tuning With a Witness Bunch”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1223-1226. doi:10.18429/JACoW-IPAC2015-MOPWI030
[n] K. Mizushima et al., “Reliable Beam-Intensity Control Technique at the HIMAC Synchrotron”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA37, pp. 143-145.
[n] C. Hessler et al., “Recent Developments at the High-charge PHIN Photoinjector and the CERN Photoemission Laboratory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 695-697. doi:10.18429/JACoW-IPAC2014-MOPRI042
[n] F. Locci and S. Magnoni, “IEPLC Framework, Automated Communication in a Heterogeneous Control System Environment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC031, pp. 139-142.
[n] Ya. V. Getmanov, O. A. Shevchenko, and N. Vinokurov, “Longitudinal Stability of ERL with Two Accelerating RF Structures”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA11, pp. 345-348.
[n] W. Fischer, M. Blaskiewicz, R. Calaga, P. Cameron, Y. Luo, and T. Pieloni, “Transverse Beam Transfer Functions of Colliding Beams in RHIC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS094, pp. 1856-1858.
[n] M. E. Angoletta et al., “Operation and New Capabilities of CERN's Digital LLRF Family for Injectors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4178-4181. doi:10.18429/JACoW-IPAC2023-THPA094
[n] J. L. Abelleira, E. Cruz Alaniz, A. Seryi, L. van Riesen-Haupt, and M. I. Besana, “FCC-hh Final-Focus for Flat-Beams: Parameters and Energy Deposition Studies”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2139-2142. doi:10.18429/JACoW-IPAC2017-TUPVA037
[n] W.-D. M?Âller, “Review of Results from Temperature Mapping and Subsequent Cavity Inspections”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUOAAU04, pp. 109-112.
[n] J. G. Kulpin, K. J. Kleman, and R. A. Legg, “The Use of a Solid State Analog Television Transmitter as a Superconducting Electron Gun Power Amplifier”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC071, pp. 3452-3454.
[n] M. Pieck, J. O. Hill, and J. F. Power, “System Integration Effort on MagViz a Liquid Explosive Detection Device”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP027, pp. 462-464.
[n] J. Bisognano et al., “A Superconducting Linac Driver for the Wisconsin Free Electron Laser”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS042, pp. 1281-1283.
[n] L. Dietl, K. Rieger, and U. Trinks, “Lead Alloys for Superconducting Cavities”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3605-3607.
[n] B. Koubek, H. Podlech, A. Schempp, and J. S. Schmidt, “Results of the High Power Test of the 325 MHz 4-Rod RFQ Prototype”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3235-3237. doi:10.18429/JACoW-IPAC2014-THPME012
[n] T. D, B. Frak, J. Morris, and S. Nemesure, “Experience Improving the Performance of Reading and Displaying Very Large Datasets”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC034, pp. 630-631.
[n] D. R. Grosso, R. Cimino, M. Commisso, R. Flammini, R. Larciprete, and R. Wanzenberg, “SEY of Al Samples from the Dipole Chamber of PETRA III at DESY”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS009, pp. 1533-1535.
[n] J. H. Li, G. Han, C. G. Li, and Z. Li, “The Simulation and Manufacture of the Room Temperature CH-DTL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 177-179. doi:10.18429/JACoW-LINAC2018-MOPO084
[n] I. Pinayev et al., “High Charge High Current Beam From BNL 113 MHz SRF Gun”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 145-149. doi:10.18429/JACoW-ERL2019-THCOYBS02
[n] Y.-M. Abiven, F. Dohou, and R. P. Patrick, “Machine Protection and Interlock Systems at Synchrotron SOLEIL”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB24, pp. 286-288.
[n] D. Huang, Q. Gu, Z. Wang, Z. T. Zhao, and D. Xiang, “ECHO-enabled Tunable Terahertz Radiation Generation with a Laser-modulated Relativistic Electron Beam”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP128, pp. 719-721.
[n] J. Irwin et al., “The Optics of the Final Focus Test Beam”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2058-2061.
[n] B. Frak, T. D, M. Harvey, J. P. Jamilkowski, and J. Morris, “Application of Transparent Proxy Servers in Control Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC157, pp. 475-478.
[n] T. Saeki and H. Hayano, “Fabrication of TESLA-shape 9-cell Cavities at KEK for Studies on Mass-Production in Collaboration with Industries”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 31-33. doi:10.18429/JACoW-IPAC2015-MOBB2
[n] A. Liu, “Applications of an MPI Enhanced Simulated Annealing Algorithm on nuSTORM and 6D Muon Cooling”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 568-570. doi:10.18429/JACoW-IPAC2015-MOPMA015
[n] R. Kleindienst, S. Keckert, J. Knobloch, and O. Kugeler, “Advanced Method to Extract the Surface Resistance From Q0 Measurements”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 867-869. doi:10.18429/JACoW-SRF2017-THPB054
[n] P.-C. Chiu et al., “TPS fast orbit feedback upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4794-4797. doi:10.18429/JACoW-IPAC2023-THPL140
[n] O. Karamyshev, D. Newton, and C. P. Welsch, “Optimization of Low Energy Electrostatic Beam Lines”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1202-1204. doi:10.18429/JACoW-IPAC2014-TUPRO071
[n] C. Bahamonde Castro et al., “Power Deposition in LHC Magnets Due to Bound-Free Pair Production in the Experimental Insertions”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1418-1421. doi:10.18429/JACoW-IPAC2016-TUPMW006
[n] M. Koujili et al., “Fast and High Accuracy Wire Scanner”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB11, pp. 188-190.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Kanesue et al., “The Commissioning of the Laser Ion Source for RHIC-EBIS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1890-1892.
- M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
- C. Bruni et al., “High Level Control Command for ThomX Transfer Line”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 830-832.
- I. Ito, Y. Honda, Y. Kobayashi, N. Nakamura, K. Torizuka, and D. Yoshitomi, “Development of an Yb-doped Fiber Laser System for an ERL Photocathode Gun”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD104, pp. 2141-2143.
- J. E. Clendenin, M. J. Browne, R. A. Gearhart, J. C. Sheppard, and J. Sodja, “Timing Stabilization for the SLC Electron Source”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 369-372.
- S. Krecic, A. Carniel, and F. Tripaldi, “Emittance reduction of the actual Booster for Elettra2.0”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL022, pp. 3155-3157.
- R. Geller, P. Briand, B. Jacquot, P. Ludwig, G. Melin, and M. Pontonnier, “ECR Ion Sources for Accelerators”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE4-02, pp. 455-459.
- D. L. Rubin, R. E. Meller, and J. P. Shanks, “Low Emittance Tuning With a Witness Bunch”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1223-1226.
- K. Mizushima et al., “Reliable Beam-Intensity Control Technique at the HIMAC Synchrotron”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA37, pp. 143-145.
- C. Hessler et al., “Recent Developments at the High-charge PHIN Photoinjector and the CERN Photoemission Laboratory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 695-697.
- F. Locci and S. Magnoni, “IEPLC Framework, Automated Communication in a Heterogeneous Control System Environment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC031, pp. 139-142.
- Ya. V. Getmanov, O. A. Shevchenko, and N. Vinokurov, “Longitudinal Stability of ERL with Two Accelerating RF Structures”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA11, pp. 345-348.
- W. Fischer, M. Blaskiewicz, R. Calaga, P. Cameron, Y. Luo, and T. Pieloni, “Transverse Beam Transfer Functions of Colliding Beams in RHIC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS094, pp. 1856-1858.
- M. E. Angoletta et al., “Operation and New Capabilities of CERN's Digital LLRF Family for Injectors”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA094, pp. 4178-4181.
- J. L. Abelleira, E. Cruz Alaniz, A. Seryi, L. van Riesen-Haupt, and M. I. Besana, “FCC-hh Final-Focus for Flat-Beams: Parameters and Energy Deposition Studies”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2139-2142.
- W.-D. M?Âller, “Review of Results from Temperature Mapping and Subsequent Cavity Inspections”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUOAAU04, pp. 109-112.
- J. G. Kulpin, K. J. Kleman, and R. A. Legg, “The Use of a Solid State Analog Television Transmitter as a Superconducting Electron Gun Power Amplifier”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC071, pp. 3452-3454.
- M. Pieck, J. O. Hill, and J. F. Power, “System Integration Effort on MagViz a Liquid Explosive Detection Device”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP027, pp. 462-464.
- J. Bisognano et al., “A Superconducting Linac Driver for the Wisconsin Free Electron Laser”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS042, pp. 1281-1283.
- L. Dietl, K. Rieger, and U. Trinks, “Lead Alloys for Superconducting Cavities”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3605-3607.
- B. Koubek, H. Podlech, A. Schempp, and J. S. Schmidt, “Results of the High Power Test of the 325 MHz 4-Rod RFQ Prototype”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3235-3237.
- T. D, B. Frak, J. Morris, and S. Nemesure, “Experience Improving the Performance of Reading and Displaying Very Large Datasets”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC034, pp. 630-631.
- D. R. Grosso, R. Cimino, M. Commisso, R. Flammini, R. Larciprete, and R. Wanzenberg, “SEY of Al Samples from the Dipole Chamber of PETRA III at DESY”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS009, pp. 1533-1535.
- J. H. Li, G. Han, C. G. Li, and Z. Li, “The Simulation and Manufacture of the Room Temperature CH-DTL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 177-179.
- I. Pinayev et al., “High Charge High Current Beam From BNL 113 MHz SRF Gun”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 145-149.
- Y.-M. Abiven, F. Dohou, and R. P. Patrick, “Machine Protection and Interlock Systems at Synchrotron SOLEIL”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB24, pp. 286-288.
- D. Huang, Q. Gu, Z. Wang, Z. T. Zhao, and D. Xiang, “ECHO-enabled Tunable Terahertz Radiation Generation with a Laser-modulated Relativistic Electron Beam”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP128, pp. 719-721.
- J. Irwin et al., “The Optics of the Final Focus Test Beam”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2058-2061.
- B. Frak, T. D, M. Harvey, J. P. Jamilkowski, and J. Morris, “Application of Transparent Proxy Servers in Control Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC157, pp. 475-478.
- T. Saeki and H. Hayano, “Fabrication of TESLA-shape 9-cell Cavities at KEK for Studies on Mass-Production in Collaboration with Industries”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 31-33.
- A. Liu, “Applications of an MPI Enhanced Simulated Annealing Algorithm on nuSTORM and 6D Muon Cooling”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 568-570.
- R. Kleindienst, S. Keckert, J. Knobloch, and O. Kugeler, “Advanced Method to Extract the Surface Resistance From Q0 Measurements”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 867-869.
- P.-C. Chiu et al., “TPS fast orbit feedback upgrade”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL140, pp. 4794-4797.
- O. Karamyshev, D. Newton, and C. P. Welsch, “Optimization of Low Energy Electrostatic Beam Lines”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1202-1204.
- C. Bahamonde Castro et al., “Power Deposition in LHC Magnets Due to Bound-Free Pair Production in the Experimental Insertions”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1418-1421.
- M. Koujili et al., “Fast and High Accuracy Wire Scanner”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB11, pp. 188-190.
Back to search