Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Machicoane, H. Y. Cheng, J. W. Guo, R. J. Rencsok, and L. Tobos, “Operation and development of the 28 GHz electron cyclotron resonance (ECR) ion source at the facility for Rare Isotope Beams (FRIB)”, presented at the ECRIS'24, Darmstadt, Germany, Sep. 2024, paper MOA2, unpublished.
[n] C. Vollinger, M. Sullivan, and M. Neroni, “Mitigation of beam coupling impedance for the wire scanners in the CERN Super Proton Synchrotron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3116-3119. doi:10.18429/JACoW-IPAC2024-THPC51
[n] W. Lu et al., “Challenges in production of intense metallic ion beams at IMP”, presented at the ECRIS'24, Darmstadt, Germany, Sep. 2024, paper MOC3, unpublished.
[n] S. Stark et al., “A Novel Sputtered Medium Beta Cavity for ALPI”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP38, pp. XX-XX.
[n] R. Kersevan et al., “Status Report on the Installation of the Warm Sections for the Superconducting Linac at the SNS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT070, pp. 3828-3830.
[n] D. S. Todd and J. Y. Benitez, “A novel inductive oven design for the production of high current, metal ion beams”, in Proc. ECRIS'24, Darmstadt, Germany, Sep. 2024, pp. 19-22. doi:10.18429/JACoW-ECRIS2024-MOC2
[n] A. K. Jain, R. C. Gupta, S. A. Kahn, G. H. Morgan, and P. A. Thompson, “Calculations of Magnetic Field for the End Design of the RHIC Arc Dipole”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2754-2757.
[n] K. I. Thoma, M. Droba, and O. Meusel, “Investigation, Simulation and First Measurements of a 2m Long Electron Column Trapped in a Gabor Lens Device”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2023-2026. doi:10.18429/JACoW-IPAC2022-WEPOTK002
[n] V. Serri?¿re and J. Jacob, “Expected Lifetime Improvement with a Superconducting Harmonic RF System at the ESRF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI004, pp. 748-750.
[n] A. Issatov, P. A. Chubunov, S. V. Mitrofanov, D. K. Pugachev, and Yu. G. Teterev, “Ion Energy Measurement System on the Sample Surface for the High Energy Beam-Line of U400M Accelerator”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC49, unpublished.
[n] V. A. Semin et al., “The Experimental Research of Cyclotron DC-280 Beam Parameters”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 102-104. doi:10.18429/JACoW-RuPAC2021-FRA04
[n] J. T. M. Lyles et al., “Design of a New VHF RF Power Amplifier System for LANSCE”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB062, pp. 4014-4016.
[n] M. P. J. Gaudreau, J. A. Casey, T. P. Hawkey, J. M. Mulvaney, M. A. Kempkes, and P. Ver Planck, “Solid State Modulator Applications In Linear Accelerators”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP8, pp. 1491-1493.
[n] R. J. Burke and M. H. Foss, “A Rapid Cycling Synchrotron Magnet with Separate AC and DC Circuits”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4021-4024.
[n] G. Bazzano et al., “Electron beam qualification at ENEA Frascati particle accelerators laboratory”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5161-5164. doi:10.18429/JACoW-IPAC2023-THPM127
[n] K. Luchini, L. T. Jackson, and I. Lutz, “Magnet Power Supply System for the ALS Storage Ring and Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1265-1268.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Machicoane, H. Y. Cheng, J. W. Guo, R. J. Rencsok, and L. Tobos, “Operation and development of the 28 GHz electron cyclotron resonance (ECR) ion source at the facility for Rare Isotope Beams (FRIB)”, presented at the 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, paper MOA2, unpublished.
- C. Vollinger, M. Sullivan, and M. Neroni, “Mitigation of beam coupling impedance for the wire scanners in the CERN Super Proton Synchrotron”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC51, pp. 3116-3119.
- W. Lu et al., “Challenges in production of intense metallic ion beams at IMP”, presented at the 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, paper MOC3, unpublished.
- S. Stark et al., “A Novel Sputtered Medium Beta Cavity for ALPI”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP38, pp. XX-XX.
- R. Kersevan et al., “Status Report on the Installation of the Warm Sections for the Superconducting Linac at the SNS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT070, pp. 3828-3830.
- D. S. Todd and J. Y. Benitez, “A novel inductive oven design for the production of high current, metal ion beams”, in Proc. 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, pp. 19-22.
- A. K. Jain, R. C. Gupta, S. A. Kahn, G. H. Morgan, and P. A. Thompson, “Calculations of Magnetic Field for the End Design of the RHIC Arc Dipole”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2754-2757.
- K. I. Thoma, M. Droba, and O. Meusel, “Investigation, Simulation and First Measurements of a 2m Long Electron Column Trapped in a Gabor Lens Device”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2023-2026.
- V. Serri?¿re and J. Jacob, “Expected Lifetime Improvement with a Superconducting Harmonic RF System at the ESRF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI004, pp. 748-750.
- A. Issatov, P. A. Chubunov, S. V. Mitrofanov, D. K. Pugachev, and Yu. G. Teterev, “Ion Energy Measurement System on the Sample Surface for the High Energy Beam-Line of U400M Accelerator”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC49, unpublished.
- V. A. Semin et al., “The Experimental Research of Cyclotron DC-280 Beam Parameters”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 102-104.
- J. T. M. Lyles et al., “Design of a New VHF RF Power Amplifier System for LANSCE”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB062, pp. 4014-4016.
- M. P. J. Gaudreau, J. A. Casey, T. P. Hawkey, J. M. Mulvaney, M. A. Kempkes, and P. Ver Planck, “Solid State Modulator Applications In Linear Accelerators”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP8, pp. 1491-1493.
- R. J. Burke and M. H. Foss, “A Rapid Cycling Synchrotron Magnet with Separate AC and DC Circuits”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4021-4024.
- G. Bazzano et al., “Electron beam qualification at ENEA Frascati particle accelerators laboratory”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM127, pp. 5161-5164.
- K. Luchini, L. T. Jackson, and I. Lutz, “Magnet Power Supply System for the ALS Storage Ring and Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1265-1268.
Back to search