Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Luedeke and E. Zimoch, “A Review on Accelerator Operator Training”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3822-3824. doi:10.18429/JACoW-IPAC2014-THPRI026
[n] H. S. Kim, Y.-S. Cho, J.-H. Jang, H.-J. Kwon, and B.-S. Park, “Fabrication Status of the PEFP DTL II”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP025, pp. 3425-3427.
[n] T. Thuillier, “Investigation on the Origin of High Energy X-Rays Observed in 3rd Generation ECRIS”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper WEOBMH03, pp. 127-131.
[n] F. D. Dziuba et al., “Status of the Superconducting CW Demonstrator for GSI”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB023, pp. 59-61.
[n] A. Kanareykin, S. P. Antipov, J. E. Butler, C.-J. Jing, W. Gai, and V. Yakimenko, “Advances in Beam Tests of Dielectric Based Accelerating Structures”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPLB03, pp. 144-146.
[n] A. Kerek, W. Klamra, L.-O. Norlin, D. Novak, and S. Westman, “A Detection System for Highly Charged Ions which have undergone Charge Exchange in the CRYRING Electron Cooler”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08E, pp. 1638-1640.
[n] T. J. Shen et al., “SSRF Magnet Power Supply System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP130, pp. 3667-3669.
[n] N. Akasaka et al., “C-band RF Main Linac System for eE- Linear Collider at 500 GeV to 1 TeV C.M. Energy”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP087G, pp. 792-794.
[n] R. M. Bergmann et al., “Verification of the Neutron Mirror Capabilities in MCNPX via Gold Foil Measurements at the EIGER Instrument Beamline at the Swiss Spallation Neutron Source (SINQ)”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3949-3951. doi:10.18429/JACoW-IPAC2015-THPF102
[n] A. Caruso, “DDS-BASED CONTROL LOOPS FOR THE RF SYSTEM AT INFN - LNS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P23, pp. XX-XX.
[n] M. Busch et al., “First Measurements on the 325 MHz Superconducting CH Cavity”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB071, pp. 636-638.
[n] V. Samulyak, H. G. Kirk, H. C. Chen, and K. T. McDonald, “Simulation of High Power Mercury Jet Targets for Neutrino Factory and Muon Collider”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA09, pp. 541-543.
[n] M. Ahammed et al., “Fabrication and Installation of Radio Frequency System for K500 Superconducting Cyclotron at Kolkata”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA001, pp. 3673-3675.
[n] S. Matsumoto, S. Michizono, H. Tsutsui, Y. H. Chin, and S. Fukuda, “Simulation Study of the Bunching Section of X-Band Klystrons”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4042, pp. 490-492.
[n] T. Meinander, A. Naves de Brito, and S. Werin, “Operation of a Narrow Gap, Short Pole Undulator at MAX I”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 651-654.
[n] Y. J. Pei et al., “Commissioning of a Compact THz Source Based on FEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2030-2032. doi:10.18429/JACoW-IPAC2019-TUPTS046
[n] T. Momose, H. Ishimaru, K. Mori, T. Shintake, and T. Suetsugu, “Aluminum Allloy DC Separators Using Heat Pipes for a ee- Collider, TRISTAN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1552-1555.
[n] L. Calabretta et al., “Beam-Chopping System for LNS Superconducting Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-34, pp. 275-278.
[n] S. H. Kim, J. K. Chung, K. H. Chung, J. G. Han, and S. K. Ko, “Study on RF System and Cavity for CESS-Upgrade”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1885-1888.
[n] M. Aramaki, N. Hayashizaki, and D. Nagae, “Beam delivery system for BNCT at Tokyo Institute of Technology”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4964-4966. doi:10.18429/JACoW-IPAC2023-THPM034
[n] G.-A. Voss, “The HERA-Project”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 7-11.
[n] M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450.
[n] A. Mostacci et al., “Advanced Beam Manipulation Techniques at SPARC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THYB01, pp. 2877-2881.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Luedeke and E. Zimoch, “A Review on Accelerator Operator Training”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3822-3824.
- H. S. Kim, Y.-S. Cho, J.-H. Jang, H.-J. Kwon, and B.-S. Park, “Fabrication Status of the PEFP DTL II”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP025, pp. 3425-3427.
- T. Thuillier, “Investigation on the Origin of High Energy X-Rays Observed in 3rd Generation ECRIS”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper WEOBMH03, pp. 127-131.
- F. D. Dziuba et al., “Status of the Superconducting CW Demonstrator for GSI”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB023, pp. 59-61.
- A. Kanareykin, S. P. Antipov, J. E. Butler, C.-J. Jing, W. Gai, and V. Yakimenko, “Advances in Beam Tests of Dielectric Based Accelerating Structures”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPLB03, pp. 144-146.
- A. Kerek, W. Klamra, L.-O. Norlin, D. Novak, and S. Westman, “A Detection System for Highly Charged Ions which have undergone Charge Exchange in the CRYRING Electron Cooler”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP08E, pp. 1638-1640.
- T. J. Shen et al., “SSRF Magnet Power Supply System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP130, pp. 3667-3669.
- N. Akasaka et al., “C-band RF Main Linac System for eE- Linear Collider at 500 GeV to 1 TeV C.M. Energy”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP087G, pp. 792-794.
- R. M. Bergmann et al., “Verification of the Neutron Mirror Capabilities in MCNPX via Gold Foil Measurements at the EIGER Instrument Beamline at the Swiss Spallation Neutron Source (SINQ)”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3949-3951.
- A. Caruso, “DDS-BASED CONTROL LOOPS FOR THE RF SYSTEM AT INFN - LNS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P23, pp. XX-XX.
- M. Busch et al., “First Measurements on the 325 MHz Superconducting CH Cavity”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB071, pp. 636-638.
- V. Samulyak, H. G. Kirk, H. C. Chen, and K. T. McDonald, “Simulation of High Power Mercury Jet Targets for Neutrino Factory and Muon Collider”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA09, pp. 541-543.
- M. Ahammed et al., “Fabrication and Installation of Radio Frequency System for K500 Superconducting Cyclotron at Kolkata”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA001, pp. 3673-3675.
- S. Matsumoto, S. Michizono, H. Tsutsui, Y. H. Chin, and S. Fukuda, “Simulation Study of the Bunching Section of X-Band Klystrons”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4042, pp. 490-492.
- T. Meinander, A. Naves de Brito, and S. Werin, “Operation of a Narrow Gap, Short Pole Undulator at MAX I”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 651-654.
- Y. J. Pei et al., “Commissioning of a Compact THz Source Based on FEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2030-2032.
- T. Momose, H. Ishimaru, K. Mori, T. Shintake, and T. Suetsugu, “Aluminum Allloy DC Separators Using Heat Pipes for a ee- Collider, TRISTAN”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1552-1555.
- L. Calabretta et al., “Beam-Chopping System for LNS Superconducting Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-34, pp. 275-278.
- S. H. Kim, J. K. Chung, K. H. Chung, J. G. Han, and S. K. Ko, “Study on RF System and Cavity for CESS-Upgrade”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1885-1888.
- M. Aramaki, N. Hayashizaki, and D. Nagae, “Beam delivery system for BNCT at Tokyo Institute of Technology”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM034, pp. 4964-4966.
- G.-A. Voss, “The HERA-Project”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 7-11.
- M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450.
- A. Mostacci et al., “Advanced Beam Manipulation Techniques at SPARC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THYB01, pp. 2877-2881.
Back to search