Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Akiyama et al., “KEKB Control System: The Present and the Future”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL3, pp. 343-345.
[n] F. Lin et al., “Storage-ring Electron Cooler for Relativistic Ion Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2466-2468. doi:10.18429/JACoW-IPAC2016-WEPMW020
[n] M. Katoh et al., “Status of UVSOR-II and Light Source Developments”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC028, pp. 2046-2048.
[n] G. H. Rees, “Status of the SNS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3044-3049.
[n] J. van Tilborg et al., “Active stabilization in high-power laser plasma accelerators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR49, unpublished.
[n] J. S. Berg, “Optimizing the Design of Linear Non-scaling Fixed Field Alternating Gradient Arcs for the Electron Rings of eRHIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2475-2478. doi:10.18429/JACoW-IPAC2016-WEPMW025
[n] N. Yamamoto et al., “Implementing Portable Channel Access Server Software in the KEKB Accelerator Control System”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D044, pp. 498-500.
[n] F. Consoli, A. C. Caruso, G. Gallo, D. Rifuggiato, E. Zappal?á, and M. Di Giacomo, “RF Design of the Power Coupler for the Spiral2 Single Bunch Selector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP277, pp. 1346-1348.
[n] D. Kleiven, B. Auchmann, V. Raginel, R. Schmidt, A. P. Verweij, and D. Wollmann, “Experimental Setup to Measure the Damage Limits of Superconducting Magnets due to Beam Impact at CERN's HiRadMat Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4200-4202. doi:10.18429/JACoW-IPAC2016-THPOY044
[n] B. Mikulec, A. Findlay, V. Raginel, G. Rumolo, and G. Sterbini, “Tune Spread Studies at Injection Energies for the CERN Proton Synchrotron Booster”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP249, pp. 175-179.
[n] D. Bafia, “Application of accelerator technology to quantum information science”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEYD03, unpublished.
[n] A. Freyberger et al., “Absolute Current Calibrations of 1A CW Electron Beam”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM006, pp. XX-XX.
[n] S. U. De Silva, J. R. Delayen, and H. Park, “Multi-Cell RF-Dipole Deflecting and Crabbing Cavity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2469-2471. doi:10.18429/JACoW-IPAC2016-WEPMW022
[n] M. Kaji et al., “Relational Database System in the KEKB Accelerator Control System”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D045, pp. 501-503.
[n] M. Cavenago et al., “Experiments with Electron Cloud and Sources”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS050, pp. 2490-2492.
[n] O. Tanaka, T. Miyajima, N. Nakamura, S. Sakanaka, and M. Shimada, “Simulation Study of Beam Halo and Loss for KEK Compact ERL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1587-1590. doi:10.18429/JACoW-IPAC2015-TUPWA068
[n] M. Di Giacomo et al., “Measurements of the First RF Prototype of the Spiral2 Single Bunch Selector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD062, pp. 2663-2665.
[n] S. D. Holmes, “Technologies for Electron-positron Linear Colliders”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOZCH01, pp. 26-30.
[n] Z. Wang, Z. T. Zhao, and D. Xiang, “Generation of Coherent Mode-locked Radiation in a Seeded Free Electron Laser”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 777-780. doi:10.18429/JACoW-IPAC2016-MOPOW027
[n] V. Raginel, B. Auchmann, R. Schmidt, D. Schoerling, A. P. Verweij, and D. Wollmann, “Experimental Setups to Determine the Damage Limit of Superconducting Magnets for Instantaneous Beam Losses”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3138-3140. doi:10.18429/JACoW-IPAC2015-WEPHA016
[n] P. Degtiarenko, D. W. Dotson, and V. P. Popov, “Radiation-Hard Beam Position Detector for Use in the Accelerator Dump Lines”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT100, pp. 4341-4343.
[n] V. P. Suller, D. Einfeld, M. G. Fedurin, J. Hormes, and G. Vignola, “An Advanced Light Source Proposed for the South Eastern USA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF068, pp. 2421-2423.
[n] Y. Nosochkov, P. Emma, T. O. Raubenheimer, and M. Woodley, “Design of the LCLS-II Electron Optics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2940-2942. doi:10.18429/JACoW-IPAC2014-THPRO034
[n] M.-A. Galilée et al., “Data acquisition and supervision for the HL-LHC quench protection system – Part II the software stack”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4247-4250. doi:10.18429/JACoW-IPAC2023-THPA122
[n] O. Tanaka, T. Miyajima, N. Nakamura, T. Obina, M. Shimada, and R. Takai, “Simulation Study of the Beam Halo Formation for Beam Loss Estimation and Mitigation at KEK Compact ERL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1843-1846. doi:10.18429/JACoW-IPAC2016-TUPOW039
[n] M. Di Giacomo, P. Balleyguier, A. C. Caruso, F. Consoli, and A. Longhitano, “Experimental determination of impedance and delay time of the 100 meander transmission line for the SPIRAL2 Single Bunch Selector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS075, pp. 1710-1712.
[n] L. Torrisi et al., “Hybrid Ion Sources For The Production Of Highly Charged Ion Beams From Metals”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 289-291.
[n] S. Sakanaka et al., “Progress in R&D Efforts on the Energy Recovery Linac in Japan”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC061, pp. 205-207.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Akiyama et al., “KEKB Control System: The Present and the Future”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WECL3, pp. 343-345.
- F. Lin et al., “Storage-ring Electron Cooler for Relativistic Ion Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2466-2468.
- M. Katoh et al., “Status of UVSOR-II and Light Source Developments”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC028, pp. 2046-2048.
- G. H. Rees, “Status of the SNS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3044-3049.
- J. van Tilborg et al., “Active stabilization in high-power laser plasma accelerators”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR49, unpublished.
- J. S. Berg, “Optimizing the Design of Linear Non-scaling Fixed Field Alternating Gradient Arcs for the Electron Rings of eRHIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2475-2478.
- N. Yamamoto et al., “Implementing Portable Channel Access Server Software in the KEKB Accelerator Control System”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D044, pp. 498-500.
- F. Consoli, A. C. Caruso, G. Gallo, D. Rifuggiato, E. Zappal?á, and M. Di Giacomo, “RF Design of the Power Coupler for the Spiral2 Single Bunch Selector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP277, pp. 1346-1348.
- D. Kleiven, B. Auchmann, V. Raginel, R. Schmidt, A. P. Verweij, and D. Wollmann, “Experimental Setup to Measure the Damage Limits of Superconducting Magnets due to Beam Impact at CERN's HiRadMat Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4200-4202.
- B. Mikulec, A. Findlay, V. Raginel, G. Rumolo, and G. Sterbini, “Tune Spread Studies at Injection Energies for the CERN Proton Synchrotron Booster”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP249, pp. 175-179.
- D. Bafia, “Application of accelerator technology to quantum information science”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper WEYD03, unpublished.
- A. Freyberger et al., “Absolute Current Calibrations of 1A CW Electron Beam”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM006, pp. XX-XX.
- S. U. De Silva, J. R. Delayen, and H. Park, “Multi-Cell RF-Dipole Deflecting and Crabbing Cavity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2469-2471.
- M. Kaji et al., “Relational Database System in the KEKB Accelerator Control System”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D045, pp. 501-503.
- M. Cavenago et al., “Experiments with Electron Cloud and Sources”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS050, pp. 2490-2492.
- O. Tanaka, T. Miyajima, N. Nakamura, S. Sakanaka, and M. Shimada, “Simulation Study of Beam Halo and Loss for KEK Compact ERL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1587-1590.
- M. Di Giacomo et al., “Measurements of the First RF Prototype of the Spiral2 Single Bunch Selector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD062, pp. 2663-2665.
- S. D. Holmes, “Technologies for Electron-positron Linear Colliders”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOZCH01, pp. 26-30.
- Z. Wang, Z. T. Zhao, and D. Xiang, “Generation of Coherent Mode-locked Radiation in a Seeded Free Electron Laser”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 777-780.
- V. Raginel, B. Auchmann, R. Schmidt, D. Schoerling, A. P. Verweij, and D. Wollmann, “Experimental Setups to Determine the Damage Limit of Superconducting Magnets for Instantaneous Beam Losses”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3138-3140.
- P. Degtiarenko, D. W. Dotson, and V. P. Popov, “Radiation-Hard Beam Position Detector for Use in the Accelerator Dump Lines”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT100, pp. 4341-4343.
- V. P. Suller, D. Einfeld, M. G. Fedurin, J. Hormes, and G. Vignola, “An Advanced Light Source Proposed for the South Eastern USA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF068, pp. 2421-2423.
- Y. Nosochkov, P. Emma, T. O. Raubenheimer, and M. Woodley, “Design of the LCLS-II Electron Optics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2940-2942.
- M.-A. Galilée et al., “Data acquisition and supervision for the HL-LHC quench protection system – Part II the software stack”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA122, pp. 4247-4250.
- O. Tanaka, T. Miyajima, N. Nakamura, T. Obina, M. Shimada, and R. Takai, “Simulation Study of the Beam Halo Formation for Beam Loss Estimation and Mitigation at KEK Compact ERL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1843-1846.
- M. Di Giacomo, P. Balleyguier, A. C. Caruso, F. Consoli, and A. Longhitano, “Experimental determination of impedance and delay time of the 100 meander transmission line for the SPIRAL2 Single Bunch Selector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS075, pp. 1710-1712.
- L. Torrisi et al., “Hybrid Ion Sources For The Production Of Highly Charged Ion Beams From Metals”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 289-291.
- S. Sakanaka et al., “Progress in R&D Efforts on the Energy Recovery Linac in Japan”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC061, pp. 205-207.
Back to search