Favourites
For Word
[n] V. Paramonov, “The Cut Disk Accelerating Structure for High Energy Linacs”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P025, pp. 2962-2964.
[n] A. H. Lumpkin, B. X. Yang, V. Litvinenko, S. Park, P. Wang, and Y. Wu, “Initial Application of a Dual-Sweep Streak Camera to the Duke Storage Ring OK-4 Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V020, pp. 874-876.
[n] D. Schneider et al., “Development of an Active Beam-Stabilization System for Electrofission Experiments at the S-Dalinac”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 111-114. doi:10.18429/JACoW-IBIC2023-MOP038
[n] A. V. Ziiatdinova, L. Bellan, M. Comunian, and A. Pisent, “Primary Beam Dynamic Simulation of Double Drift Double Buncher System for SPES Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 117-119. doi:10.18429/JACoW-LINAC2016-MOPRC020
[n] P. K. Roy et al., “Characterization of Li+ Alumino-Silicate Ion Source for Target Heating Experiments”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD046, pp. 1506-1508.
[n] K. Buakor et al., “Development of Linac-Based MIR/THz FEL Facility and Photocathode RF-gun in Thailand”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2763-2766. doi:10.18429/JACoW-IPAC2017-WEPAB083
[n] S. R. Lawrie, D. C. Faircloth, A. P. Letchford, M. Perkins, M. Whitehead, and T. Wood, “Installing the VESPA H- Ion Source Test Stand at RAL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 614-616. doi:10.18429/JACoW-IPAC2014-MOPRI015
[n] C. Dickerson, S. A. Kondrashev, P. N. Ostroumov, and A. I. Pikin, “Initial Simulations of Electron and Ion Beam Optics for the ANL EBIS Electron Collector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP015, pp. 1525-1527.
[n] J. Y. Liu et al., “Development of the X-Band Megawatt-Class Coaxial Magnetrons”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2346-2348. doi:10.18429/JACoW-IPAC2021-TUPAB357
[n] H. M. Miyadera, A. J. Jason, and K. Nagamine, “Design of Muon Accelerators for an Advanced Muon Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS017, pp. 3032-3034.
[n] O. Dressler and J. Feikes, “Operational Experiences with the BESSY II Injection System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA87, pp. 1279-1281.
[n] M. Di Giacomo, M. Michel, P. Bertrand, P. Balleyguier, and G. Fremont, “Electrode Design Improvements in the SPIRAL2 Single Bunch Selector”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP098, pp. 286-288.
[n] M. Comunian, C. Baltador, L. Bellan, M. Cavenago, A. Pisent, and E. Khabibullina, “Design of High Resolution Mass Spectrometer for SPES”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3252-3254. doi:10.18429/JACoW-IPAC2018-THPAK021
[n] J. Y. Liu, H. B. Chen, A. Grudiev, J. Shi, and H. Zha, “Wakefield Suppression in the Main LINAC of the Klystron-Based First Stage of CLIC at 380 GeV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2899-2902. doi:10.18429/JACoW-IPAC2019-WEPRB043
[n] M. Comunian, L. Bellan, A. Pisent, and A. V. Ziiatdinova, “Beam Dynamic Simulation for the Beam Line from Charge Breeder to ALPI for SPES Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3255-3257. doi:10.18429/JACoW-IPAC2018-THPAK022
[n] S. S. Kurennoy, A. J. Jason, and H. M. Miyadera, “Large-Acceptance Linac for Accelerating Low-Energy Muons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE075, pp. 3518-3520.
[n] A. Prudnikava, J. Knobloch, O. Kugeler, and Y. Tamashevich, “Electrodeposition of copper on Niobium for cryocooler application”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3026-3028. doi:10.18429/JACoW-IPAC2023-WEPA161
[n] P. Wang, “RF design of the pulse compression system for the klystron-based CLIC main linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2924-2927. doi:10.18429/JACoW-IPAC2023-WEPA115
[n] D. C. Plostinar et al., “Status of the FETS Commissioning and Comparison with Particle Tracking Results”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP028, pp. 461-463.
[n] A. Prudnikava, J. Knobloch, O. Kugeler, O. Petracic, K. Siemensmeyer, and Y. Tamashevich, “Magnetic properties of niobium processed with high- and low-temperature nitrogen baking for SRF applications”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS138, unpublished.
[n] J. Wang and P. Wang, “Combining multi-objective genetic algorithm and neural network dynamically for the complex optimization problems in accelerator physics”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL086, unpublished.
[n] Y. Kawase and M. Inoue, “Neutron Factory Project at KURRI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D012, pp. 104-106.
[n] T. Sakai, M. Ikeda, S. Ohsawa, T. Sugimura, and N. Sakabe, “High Brightness Electron Beam Focusing System for an X-ray Generator”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP111, pp. 322-324.
[n] R. B. Fiorito, A. G. Shkvarunets, T. Watanabe, and V. Yakimenko, “Advances in Optical Transition and Diffraction Radiation Emittance Diagnostics”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT089, pp. 4224-4226.
[n] G. W. Wang et al., “Fabrication and Test of 500MHz Nb Cavity for BEPCII”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO052, pp. 512-514.
[n] J. Feikes et al., “Progress Towards Realisation of Steady-State Microbunching at the Metrology Light Source”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper MOXB01, unpublished.
[n] S. A. Kondrashev, E. N. Beebe, T. Kanesue, M. Okamura, and R. H. Scott, “Picosecond Laser Ablation and Ion Clusters for External Injection into the Extended EBIS”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper WE2WH02, unpublished.
[n] J. Brodowski, “Design of a Versatile ESQ Transport System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3666-3669.
[n] Y. Iwashita, “Implementation of Multilayered Conductor Structures on RF Cavity Surfaces”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP106, pp. 310-312.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Paramonov, “The Cut Disk Accelerating Structure for High Energy Linacs”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P025, pp. 2962-2964.
- A. H. Lumpkin, B. X. Yang, V. Litvinenko, S. Park, P. Wang, and Y. Wu, “Initial Application of a Dual-Sweep Streak Camera to the Duke Storage Ring OK-4 Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V020, pp. 874-876.
- D. Schneider et al., “Development of an Active Beam-Stabilization System for Electrofission Experiments at the S-Dalinac”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP038, pp. 111-114.
- A. V. Ziiatdinova, L. Bellan, M. Comunian, and A. Pisent, “Primary Beam Dynamic Simulation of Double Drift Double Buncher System for SPES Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 117-119.
- P. K. Roy et al., “Characterization of Li+ Alumino-Silicate Ion Source for Target Heating Experiments”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD046, pp. 1506-1508.
- K. Buakor et al., “Development of Linac-Based MIR/THz FEL Facility and Photocathode RF-gun in Thailand”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2763-2766.
- S. R. Lawrie, D. C. Faircloth, A. P. Letchford, M. Perkins, M. Whitehead, and T. Wood, “Installing the VESPA H- Ion Source Test Stand at RAL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 614-616.
- C. Dickerson, S. A. Kondrashev, P. N. Ostroumov, and A. I. Pikin, “Initial Simulations of Electron and Ion Beam Optics for the ANL EBIS Electron Collector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP015, pp. 1525-1527.
- J. Y. Liu et al., “Development of the X-Band Megawatt-Class Coaxial Magnetrons”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2346-2348.
- H. M. Miyadera, A. J. Jason, and K. Nagamine, “Design of Muon Accelerators for an Advanced Muon Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS017, pp. 3032-3034.
- O. Dressler and J. Feikes, “Operational Experiences with the BESSY II Injection System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA87, pp. 1279-1281.
- M. Di Giacomo, M. Michel, P. Bertrand, P. Balleyguier, and G. Fremont, “Electrode Design Improvements in the SPIRAL2 Single Bunch Selector”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP098, pp. 286-288.
- M. Comunian, C. Baltador, L. Bellan, M. Cavenago, A. Pisent, and E. Khabibullina, “Design of High Resolution Mass Spectrometer for SPES”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3252-3254.
- J. Y. Liu, H. B. Chen, A. Grudiev, J. Shi, and H. Zha, “Wakefield Suppression in the Main LINAC of the Klystron-Based First Stage of CLIC at 380 GeV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2899-2902.
- M. Comunian, L. Bellan, A. Pisent, and A. V. Ziiatdinova, “Beam Dynamic Simulation for the Beam Line from Charge Breeder to ALPI for SPES Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3255-3257.
- S. S. Kurennoy, A. J. Jason, and H. M. Miyadera, “Large-Acceptance Linac for Accelerating Low-Energy Muons”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE075, pp. 3518-3520.
- A. Prudnikava, J. Knobloch, O. Kugeler, and Y. Tamashevich, “Electrodeposition of copper on Niobium for cryocooler application”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA161, pp. 3026-3028.
- P. Wang, “RF design of the pulse compression system for the klystron-based CLIC main linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA115, pp. 2924-2927.
- D. C. Plostinar et al., “Status of the FETS Commissioning and Comparison with Particle Tracking Results”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP028, pp. 461-463.
- A. Prudnikava, J. Knobloch, O. Kugeler, O. Petracic, K. Siemensmeyer, and Y. Tamashevich, “Magnetic properties of niobium processed with high- and low-temperature nitrogen baking for SRF applications”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS138, this conference.
- J. Wang and P. Wang, “Combining multi-objective genetic algorithm and neural network dynamically for the complex optimization problems in accelerator physics”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL086, unpublished.
- Y. Kawase and M. Inoue, “Neutron Factory Project at KURRI”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D012, pp. 104-106.
- T. Sakai, M. Ikeda, S. Ohsawa, T. Sugimura, and N. Sakabe, “High Brightness Electron Beam Focusing System for an X-ray Generator”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP111, pp. 322-324.
- R. B. Fiorito, A. G. Shkvarunets, T. Watanabe, and V. Yakimenko, “Advances in Optical Transition and Diffraction Radiation Emittance Diagnostics”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT089, pp. 4224-4226.
- G. W. Wang et al., “Fabrication and Test of 500MHz Nb Cavity for BEPCII”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO052, pp. 512-514.
- J. Feikes et al., “Progress Towards Realisation of Steady-State Microbunching at the Metrology Light Source”, presented at the 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, paper MOXB01, unpublished.
- S. A. Kondrashev, E. N. Beebe, T. Kanesue, M. Okamura, and R. H. Scott, “Picosecond Laser Ablation and Ion Clusters for External Injection into the Extended EBIS”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper WE2WH02, unpublished.
- J. Brodowski, “Design of a Versatile ESQ Transport System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3666-3669.
- Y. Iwashita, “Implementation of Multilayered Conductor Structures on RF Cavity Surfaces”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP106, pp. 310-312.
Back to search