JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. C. Cornell, “Proposal for a Beam Swinger”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I7-09, pp. 552-554. 
[n]	V. C. Kempson, “Diamond: Ten Years of Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2797-2799. doi:10.18429/JACoW-IPAC2017-WEPAB094
[n]	F. M. Russell, “A Strong-Focusing Cyclotron with Separated Orbits”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63H03, pp. XX-XX. 
[n]	M. A. Mizintseva and D. A. Ovsyannikov, “On the Minimax Problem of Beam Dynamics Optimization”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 361-363. doi:10.18429/JACoW-RUPAC2016-WEPSB005
[n]	H. Hassanzadegan et al., “Beam Current Monitor System of the European Spallation Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP041, pp. 526-528. 
[n]	F.-J. Decker et al., “Performance Improvements of the SLAC Linac for the FACET Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO068, pp. 2021-2023. 
[n]	R. Bourque et al., “The APS SCRF Cryomodule: Present Status and Potential Future Plans”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA155, pp. 2954-2956. 
[n]	R. M. Bodenstein, P. Burrows, and E. Marin, “Challenges and Status of Tuning Simulations for CLIC Traditional Beam Delivery System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 412-414. doi:10.18429/JACoW-IPAC2018-MOPML010
[n]	G. W??stefeld et al., “Coherent THz Measurements at the Metrology Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA015, pp. 2508-2510. 
[n]	J. K. Hawkins, R. B. Howard, and H. V. Nguyen, “Automated Real-Time Testing  For Embedded Control Systems”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP037, pp. XX-XX. 
[n]	P. Lanz, M. Zach, and M. Lipnicky, “A Dual Frequency Resonator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1151-1154. 
[n]	J. C. Dooling, M. K. Lien, and F. R. Brumwell, “A Real-Time Energy Monitor System for the IPNS LINAC”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC18, pp. 193-195. 
[n]	C. E. Reece, “An Experimental Analysis of Effective EP Parameters for Low-Frequency Cylindrical Nb Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 472-476. doi:10.18429/JACoW-SRF2019-TUP029
[n]	G. W. Kowalski, K. Gula, R. Pana, A. I. Wawrzyniak, and J. J. Wiechecki, “Design and Status of Fast Orbit Feedback System at SOLARIS”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper WEP35, unpublished. 
[n]	C. M. Bhat, B. Hendricks, and J. J. Nelson, “Online Measurement of the Energy Spread of Multi-Turn Beam in the Fermilab Booster at Injection”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 237-241. doi:10.18429/JACoW-HB2016-MOPL020
[n]	L. Felsberger, U. Dorda, J. Uythoven, A. Apollonio, J. van de Walle, and D. Vandeplassche, “Quantitative availability modelling for the MYRRHA accelerator driven system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5114-5117. doi:10.18429/JACoW-IPAC2023-THPM105
[n]	M. Votava, B. Chase, and M. Wendt, “Controls, LLRF, and Instrumentation Systems for ILC Test Facilities at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS022, pp. 479-481. 
[n]	Y. Sato et al., “Control System for J-PARC Hadron Experimental Facility”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP108, pp. 331-333. 
[n]	M. Gonzalez-Berges et al., “Beam Instrumentation Simulation in Python”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1454-1459. doi:10.18429/JACoW-ICALEPCS2023-THPDP060
[n]	H. Jiang, L. Lai, Q. Yan, Z. Tang, Z. Xu, and S. Wang, “Development of analog front-end module for the BPM signal processor at SSRF”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 690-693. doi:10.18429/JACoW-IBIC2025-WEPCO29
[n]	J.-F. Ostiguy, C. M. Bhat, and V. A. Lebedev, “Modeling Longitudinal Dynamics in the Fermilab Booster Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 873-876. doi:10.18429/JACoW-IPAC2016-MOPOY013
[n]	T. A. Miller, D. M. Gassner, V. Litvinenko, M. G. Minty, I. Pinayev, and B. Sheehy, “Infrared Diagnostics Instrumentation Design for the Coherent Electron Cooling Proof of Principle Experiment”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP074, pp. 905-908. 
[n]	M. Ferrario et al., “Status of the SPARC Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF042, pp. 399-401. 
[n]	J. E. Griffin, “Compensation for Beam Loading in the 400-GeV Fermilab Main Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1910-1914. 
[n]	J. Tan, B. Bonin, and H. Safa, “Field Emission and High Voltage Cleaning of Particulate Contaminants on Extended Metallic Surfaces”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C01, pp. 365-368. 
[n]	U. Pudasaini, G. V. Eremeev, M. J. Kelley, and C. E. Reece, “Recent Developments of Nb?Sn at Jefferson Lab for SRF Accelerator Application”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 713-716. doi:10.18429/JACoW-NAPAC2019-WEPLM52
[n]	J. D. Gilpatrick et al., “Proposed Beam Diagnostics Instrumentation for the LANSCE Refurbishment Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS051, pp. 4099-4101. 
[n]	H. N. Jungwirth et al., “A Superconducting Ring-Cyclotron for Proton Therapy”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-07, pp. 621-624. 
[n]	N. Pupeter, G. Mueller, E. Mahner, A. Matheisen, H. Piel, and D. Proch, “Sputtering of High Quality Niobium Films into 1.5 GHz Monocell Cavities”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2069-2071. 
[n]	R. Die-Cas, H. Leboutet, and J. Pottier, “Performance Evaluation of a Heavy Ion RF Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3520-3523. 
[n]	I. Yamane and Y. Yamaguchi, “Stripping Carbon Foils for H-Charge-Exchange Injection into the KEK-PS Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1948-1951. 
[n]	J. E. Griffin, “The Effect of Large Delays on Beam RF Phase Lock Loops”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3944-3947. 
[n]	Y. Joo, P. Buaphad, Y. Kim, H. R. Lee, J. Y. Lee, and S. Lee, “Design of 3 MeV S-band Electron Linac Structure With 2.5 Bunching Cells”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2934-2936. doi:10.18429/JACoW-IPAC2019-WEPRB055
[n]	F. Merrill, “Transverse Match of High Peak-Current Beam into the LANSCE DTL Using PARMILA”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP71, pp. 231-233. 
[n]	D. Darvas, I. Majzik, and E. Blanco Vinuela, “What is Special About PLC Software Model Checking?”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1781-1786. doi:10.18429/JACoW-ICALEPCS2017-THPHA159
[n]	J. T. Maniscalco et al., “Statistical Modeling of Peak Accelerating Gradients in LCLS-II and LCLS-II-HE”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 804. doi:10.18429/JACoW-SRF2021-THPCAV009
[n]	C. Johnstone, W. Marsh, S. Lackey, J. Firebaugh, J. Smolucha, and K. Woodbury, “A Beam Position Monitor Data Acquisition System for the New Fermilab 400 MeV Line”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1912-1914. 
[n]	N. I. Bolibruch, R. Igarashi, and J. M. Vogt, “Photodiode Calibration using an Electrical Substitution Radiometer in the Hard X-ray Region”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD83, pp. 500-502. 
[n]	E. D. Kotina, A. V. Babin, P. V. Bazhanov, D. A. Ovsyannikov, V. A. Ploskikh, and Yu. Shirokolobov, “Mathematical and Computer Methods of Data Processing in Nuclear Medicine Studies”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 480-482. doi:10.18429/JACoW-RUPAC2016-WEPSB051
[n]	L. V. Vladimirova and I. D. Rubtsova, “On Application of Monte Carlo Method for Poisson Problem Solving”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 368-371. doi:10.18429/JACoW-RUPAC2016-WEPSB007
[n]	J. Y. Lee et al., “Design of 1.5 GeV Compact Storage Ring for the EUV and Soft X-rays”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1028-1030. doi:10.18429/JACoW-IPAC2019-MOPTS079
[n]	R. D?â, “Automated Documentation of Tunes in the Beam Lines of the COMET Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 345-347. doi:10.18429/JACoW-Cyclotrons2016-THP17
[n]	W. Busse, “Status of the VICKSI Tandem Injector Project”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper E02, pp. 230-232. 
[n]	E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139. 
[n]	M. Tomizawa et al., “8 Gev Slow Extraction Beam Test for Muon to Electron Conversion Search Experiment at J-PARC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2322-2325. doi:10.18429/JACoW-IPAC2019-WEPMP010
[n]	F. Merrill and L. Rybarcyk, “Beam Dynamics Simulations of the LANSCE Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4031, pp. 839-841. 
[n]	M. E. Middendorf, F. R. Brumwell, J. C. Dooling, M. K. Lien, and G. E. McMichael, “The IPNS RCS RF System Third Cavity Upgrade”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH029, pp. 834-836. 
[n]	M. Kimura et al., “Beam test of C-band Compact accelerating structure made of longitudinally-split two halves”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7627, unpublished. 
[n]	M. Di Carlo, M. Dolci, R. Smareglia, P. S. Swart, and G. M. le Roux, “Local Monitoring and Control System for the SKA Telescope Manager: A Knowledge-Based System Approach for Issues Identification Within a Logging Service”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 930-933. doi:10.18429/JACoW-ICALEPCS2015-WEPGF097
[n]	J. W. Angle, E. M. Lechner, A. D. Palczewski, C. E. Reece, M. J. Kelley, and F. A. Stevie, “SIMS Sample Holder and Grain Orientation Effects”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 401. doi:10.18429/JACoW-SRF2021-TUPFDV002
[n]	Y. J. Yuan, Y. N. Rao, B. W. Wei, and J. W. Xia, “Simulation of RF Stacking and Multiple Single-Turn Injection and Multiturn Injection”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-11, pp. 479-482. 
[n]	I. Yamane, S. Hiramatsu, M. Kihara, N. Kumagai, and E. Takasaki, “Performance Improvement of the KEK PS-Booster Synchrotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 301-304. 
[n]	D. Kr?ñmer, “The BESSY Soft X-ray FEL User Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF008, pp. 312-314. 
[n]	A. Marchionni, “Beam intensity upgrade at Fermilab”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper MOCP01, pp. 34-38. 
[n]	A. Jejcic, “Second Order Effects of a Sextupolar Field on Betatron Oscillations in a Storage Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2445-2448. 
[n]	K. Yamada, “Upgrade and Current Status of High-Frequency Systems for RIKEN Ring Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOAI02, pp. 6-11. doi:10.18429/JACoW-CYCLOTRONS2022-MOAI02
[n]	A. Kosicek, S. Bassanese, and M. Znidarcic, “Libera Brilliance Single Pass Position Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP055, pp. 3579-3581. 
[n]	H. Abe et al., “Initial Results of RF Gun Experiment”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA56, pp. 2015-2017. 
[n]	V. Veshcherevich, S. A. Belomestnykh, W.-D. Moller, P. Quigley, J. J. Reilly, and J. Sears, “High Power Tests of First Input Couplers for Cornell ERL Injector Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS013, pp. 2355-2357. 
[n]	A. V. Smirnov, A. R. Galimov, and A. N. Svidetelev, “Challenges of Obtaining of Ultra-High Vacuum in NICA Project”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 110-112. doi:10.18429/JACoW-RUPAC2018-THCDMH03
[n]	S. Banna, V. Berezovsky, and L. Schachter, “First Experimental Evidence for PASER: Particle Acceleration by Stimulated Emission of Radiation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXKI01, pp. 1889-1893. 
[n]	C. M. S. Sears, R. L. Byer, E. R. Colby, T. Plettner, R. Siemann, and J. E. Spencer, “Harmonic Inverse FEL Interaction at 800nm”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP056, pp. XX-XX. 
[n]	L. Bottura et al., “Performance of the 1-m Model of the 6 kA Superconducting Quadrupole for the LHC Insertions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B18, pp. 2145-2147. 
[n]	W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 434-437. 
[n]	F. Tazzioli et al., “Initial Commissioning of the LISA Superconducting Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-01, pp. 293-295. 
[n]	R. N. Fernandes and D. P. Spruce, “BsxCuBE: a Control System for BioSAXS Experiments”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP005, pp. XX-XX. 
[n]	G. Sikler et al., “Fabrication of a Prototype of a Fast Cycling Superferric Dipole-Magnet”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP043, pp. 232-234. 
[n]	C. G. R. Geddes et al., “Scaled Simulation Design of High Quality Laser Wakefield Accelerator Stages”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP075, pp. 2970-2972. 
[n]	B. M. Cowan et al., “Laser Wakefield Simulation Using a Speed-of-Light Frame Envelope Model”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP018, pp. 4569-4569. 
[n]	M. Yoshioka et al., “High Gradient Studies on UHV Room Temperature Cavities at S-Band for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-95, pp. 302-304. 
[n]	G. W. Dodson and T. L. Williams, “Operational Availability of the SNS During Commissioning”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE033, pp. 2289-2291. 
[n]	I. D. Rubtsova, “On Modeling and Optimization of Intense Quasiperiodic Beam Dynamics”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 364-367. doi:10.18429/JACoW-RUPAC2016-WEPSB006
[n]	L. Bartelson et al., “A Second Long Pulse Modulator for TESLA Using IGBTs”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP048G, pp. 2585-2587. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search