Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. S. Zisman, “Muon Ionization Cooling Experiment (MICE)”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper FR102, pp. 832-836.
[n] J. T. Seeman, “Collective Electron Driven Linac for High Energy Physics”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3180-3183.
[n] Y. Z. Yang, “Physical Research and Engineering Design of SSMB Laser Modulator”, presented at the SAP'23, Xichang, China, Jul. 2023, paper TUPB032, unpublished.
[n] H. Hayano, “Overview of Linear Collider Test Facilities and Results”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper FR101, pp. 827-831.
[n] G. Marotta, C. Baffa, G. Brajnik, M. Colciago, E. Giani, and I. Novak, “Strategy and Tools to Test Software in the SKA Project: The CSP. LMC Case”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 34-39. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO03
[n] H. Q. Feng et al., “Design Study on Higher Harmonic Cavity for ALS-U”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3011-3013. doi:10.18429/JACoW-IPAC2019-WEPRB081
[n] S. H. Kim et al., “Design of a 185.7 MHz Superconducting RF Photoinjector Quarter-Wave Resonator for the LCLS-II-HE Low Emittance Injector”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 245-248. doi:10.18429/JACoW-NAPAC2022-MOPA85
[n] J. Li et al., “CSNS Linac RF System Design and R&D Progress”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP046, pp. 863-865.
[n] S. Chetri, D. C. Larbalestier, Z-H. Sung, P. Dhakal, and P. J. Lee, “Determination of Bulk and Surface Superconducting Properties of N2-Doped Cold Worked, Heat Treated and Electro-polished SRF Grade Niobium”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB052, pp. 214-218.
[n] D. M. Gassner et al., “Instrumentation for the Proposed Low Energy RHIC Electron Cooling Project with Energy Recovery”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF05, pp. 49-54.
[n] Z. H. Wang, Z. N. Liu, J. Shi, and H. Zha, “DAMAGE BEHAVIOR OF TUNGSTEN TARGETS FOR 6 MEV LINEAR ACCELERATORS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3934-3936. doi:10.18429/JACoW-IPAC2019-THPRB055
[n] K. Malapati and Z. Lentz, “EPICS in practice at LCLS”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD068, unpublished.
[n] J. Diamond, “An Agile/XP software development process for modernizing the accelerator control system at Fermilab”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD084, unpublished.
[n] A. M. Porcellato et al., “Upgrading of Medium Beta ALPI Resonators by Nb Sputtering”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE042, pp. 608-610.
[n] M. Fedorov et al., “Control system upgrades at the National Ignition Facility for higher laser energy and higher fusion yields”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 329-336. doi:10.18429/JACoW-ICALEPCS2025-TUCR002
[n] K. FEDOROV et al., “EPAC beamline Prototype: Development and optimisation of a high-repetition-rate LWFA system”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 78-82. doi:10.18429/JACoW-IBIC2025-MOPCO09
[n] K. Masuda et al., “Commissioning of IFMIF Prototype Accelerator Towards CW Operation”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 319-323. doi:10.18429/JACoW-LINAC2022-TU2AA04
[n] P. Krejcik et al., “SCU Development at the LCLS for Future FELs”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper TH1D3, unpublished.
[n] M. Lesourd, E. Plouviez, L. Farvacque, and J. M. Filhol, “DAMPING LINK FOR MAGNET GIRDER ASSEMBLY AND E-BEAM STABILITY IMPROVEMENT AT THE ESRF”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WECM01, pp. XX-XX.
[n] F. Gerigk et al., “Development Status of the Pi-Mode Accelerating Structure (PIMS) for Linac4”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP064, pp. 939-941.
[n] M. P. Kelly, S. M. Gerbick, D. R. Olis, and A. M. Rowe, “Surface Processing Facilities for Superconducting RF Cavities at ANL”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP026, pp. 839-841.
[n] J. Bernardini et al., “Integration of computer vision system to track the alignment SRF cavities into the test cryostat for PIP-II at Fermilab”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 191-194. doi:10.18429/JACoW-LINAC2024-MOPB064
[n] C. Rohde and K. Bishofberger, “Building a MOPA laser for H- beam shaping”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7364, unpublished.
[n] H. Jenhani et al., “Implementation of the Test Bench for the PIP-II LB650 Cryomodules at CEA”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 243-247. doi:10.18429/JACoW-SRF2023-MOPMB057
[n] D. Passarelli et al., “Test Results of the Prototype SSR1 Cryomodule for PIP-II at Fermilab”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4461-4465. doi:10.18429/JACoW-IPAC2021-THPAB343
[n] J. M. Arnesano and S. Döbert, “Design of an X-Band Bunching and Accelerating System for AWAKE Run 2”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 458-461. doi:10.18429/JACoW-LINAC2022-TUPOPA24
[n] S. L. Bogomolov et al., “Research on Metallic Ion Beam Production With Electron Cyclotron Resonance Ion Sources”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 62-65. doi:10.18429/JACoW-CYCLOTRONS2019-MOP017
[n] K. M. Chen et al., “Beam Orbit Shift Due to BPM Thermal Deformation Using Machine Learning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2577-2579. doi:10.18429/JACoW-IPAC2022-THPOPT008
[n] S. A. Lewis, “Elements of Control System Longevity”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOPA04, pp. 736-738.
[n] D. Naito, Y. Honda, T. Miyajima, and N. Yamamoto, “Production and Performance Evaluation of a Compact Deflecting Cavity to Measure the Bunch Length in the cERL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1023-1026. doi:10.18429/JACoW-IPAC2021-MOPAB330
[n] A. Hernandez and M. Bobrek, “GPS IRIG-B over fiber links: an alternative to NTP”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 673-678. doi:10.18429/JACoW-ICALEPCS2025-TUPD074
[n] M. Gyr, B. Henrist, J. M. Jimenez, J.-M. Lacroix, and S. Sgobba, “Aperture and Field Constraints for the Vacuum System in the LHC Injection Septa”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE042, pp. 2732-2734.
[n] P. Wang et al., “Experimental Study on PM-AM Method in Pulse Compression System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4230-4232. doi:10.18429/JACoW-IPAC2017-THPIK059
[n] L. Nadolski et al., “SOLEIL II project: entrance in the construction phase”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 212-215. doi:10.18429/JACoW-IPAC2025-MOPB074
[n] J. Conrad et al., “Improving the Superconducting Cavities and Operational Findings at the S-DALINAC”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP006, pp. 395-397.
[n] Y. Yu, K. Xuan, C. Li, G. Liu, and W. Xu, “Initial application of machine learning for beam parameter optimization at the Hefei Light Source II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3974-3977. doi:10.18429/JACoW-IPAC2023-THPA012
[n] G. Devanz, M. Baudrier, E. Cenni, L. Maurice, and O. Piquet, “Instrumentation for High Performance Cavities and Cryomodule Field Emission Analysis”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 978-985. doi:10.18429/JACoW-SRF2023-FRIBA02
[n] H. Jagdfeld et al., “Vacuum- and Bake-Out-Testbenches for the HESR at FAIR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3366-3368. doi:10.18429/JACoW-IPAC2017-WEPVA049
[n] M.-H. Stodel et al., “Commissioning of the S3 Spectrometer: advances, challenges and outlook”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 26-29. doi:10.18429/JACoW-HIAT2025-MOC01
[n] N. Lentz, B. Fishler, U. Farooq, and Z. Lentz, “A motion control system for fly scans synchronized to X-ray pulses”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 312-320. doi:10.18429/JACoW-ICALEPCS2025-TUCG003
[n] G. Z. Georgiev et al., “Beam Preparation with Temporally Modulated Photocathode Laser Pulses for a Seeded THz FEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2866-2869. doi:10.18429/JACoW-IPAC2021-WEPAB115
[n] A. D. Tran, X. Gu, and Y. Hao, “RHIC Electron Beam Cooling Analysis Using Principle Component and Autoencoder Analysis”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 260-262. doi:10.18429/JACoW-NAPAC2022-MOPA89
[n] J. Schaffran, S. Aderhold, D. Reschke, L. Steder, N. Walker, and L. Monaco, “Analysis of the Test Rate for European XFEL Series Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB079, pp. 316-318.
[n] P. Cameron et al., “The RHIC Tune Measurement System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA102, pp. 2117-2119.
[n] A. Lueangaramwong et al., “Numerical Study of Beam Dynamics in PITZ Bunch Compressor”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3285-3288. doi:10.18429/JACoW-IPAC2021-WEPAB274
[n] C. Song, S. Gu, and W. Huang, “Study and simulation of cavity bunch length monitor based on monopole mode”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3962-3965. doi:10.18429/JACoW-IPAC2023-THPA005
[n] S. Yue, P. A. Arrutia Sota, C. Bracco, Y. Dutheil, and A. Lechner, “Beam dump transfer line design in FCC-ee”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 445-448. doi:10.18429/JACoW-IPAC2025-MOPM051
[n] R. Biscardi and G. Ramirez, “RF System for Bunch Lengthening”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPP03, pp. 1660-1662.
[n] D. Naito, S. Sakanaka, T. Takahashi, T. Yamaguchi, and N. Yamamoto, “Design Consideration of a Longitudinal Kicker Cavity for Compensating Transient Beam Loading Effect in Synchrotron Light Sources”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1027-1030. doi:10.18429/JACoW-IPAC2021-MOPAB331
[n] S. H. Kim, E. L. Black, J. M. Jagger, and K. M. Thompson, “Fabrication and Tests of Prototype Quadrupole Magnets for the Storage Ring of the Advanced Photon Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2375-2378.
[n] K. Winter, A. Gerbershagen, M. Niemand, and O. Kuiken, “Parallel control systems: an efficient and low risk approach for a migration from Vsystem to EPICS”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 336-343. doi:10.18429/JACoW-ICALEPCS2025-TUCR003
[n] C.-K. Huang et al., “Modeling of Nonlinear Beam Dynamics via a Novel Particle-Mesh Method and Surrogate Models with Symplectic Neural Networks”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 462-464. doi:10.18429/JACoW-NAPAC2022-TUPA53
[n] L. Segui et al., “Characterization and First Beam Loss Detection with One ESS-nBLM System Detector”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 29-35. doi:10.18429/JACoW-IBIC2019-MOBO04
[n] T. Roy, “Advances in SRF Qubit Architectures for Quantum Computing”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper FRIYA01, unpublished.
[n] S. M. Wei et al., “Beam Extraction System for CYCIAE-14”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP026, pp. 105-107.
[n] M. Bai et al., “Observations of Snake Resonance in RHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP044, pp. 2839-2841.
For LaTeX
Use Complete Form
For BibTeX
References
- M. S. Zisman, “Muon Ionization Cooling Experiment (MICE)”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper FR102, pp. 832-836.
- J. T. Seeman, “Collective Electron Driven Linac for High Energy Physics”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3180-3183.
- Y. Z. Yang, “Physical Research and Engineering Design of SSMB Laser Modulator”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper TUPB032, unpublished.
- H. Hayano, “Overview of Linear Collider Test Facilities and Results”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper FR101, pp. 827-831.
- G. Marotta, C. Baffa, G. Brajnik, M. Colciago, E. Giani, and I. Novak, “Strategy and Tools to Test Software in the SKA Project: The CSP. LMC Case”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2BCO03, pp. 34-39.
- H. Q. Feng et al., “Design Study on Higher Harmonic Cavity for ALS-U”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3011-3013.
- S. H. Kim et al., “Design of a 185.7 MHz Superconducting RF Photoinjector Quarter-Wave Resonator for the LCLS-II-HE Low Emittance Injector”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 245-248.
- J. Li et al., “CSNS Linac RF System Design and R&D Progress”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP046, pp. 863-865.
- S. Chetri, D. C. Larbalestier, Z-H. Sung, P. Dhakal, and P. J. Lee, “Determination of Bulk and Surface Superconducting Properties of N2-Doped Cold Worked, Heat Treated and Electro-polished SRF Grade Niobium”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB052, pp. 214-218.
- D. M. Gassner et al., “Instrumentation for the Proposed Low Energy RHIC Electron Cooling Project with Energy Recovery”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF05, pp. 49-54.
- Z. H. Wang, Z. N. Liu, J. Shi, and H. Zha, “DAMAGE BEHAVIOR OF TUNGSTEN TARGETS FOR 6 MEV LINEAR ACCELERATORS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3934-3936.
- K. Malapati and Z. Lentz, “EPICS in practice at LCLS”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD068, unpublished.
- J. Diamond, “An Agile/XP software development process for modernizing the accelerator control system at Fermilab”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD084, unpublished.
- A. M. Porcellato et al., “Upgrading of Medium Beta ALPI Resonators by Nb Sputtering”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE042, pp. 608-610.
- M. Fedorov et al., “Control system upgrades at the National Ignition Facility for higher laser energy and higher fusion yields”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 329-336.
- K. FEDOROV et al., “EPAC beamline Prototype: Development and optimisation of a high-repetition-rate LWFA system”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 78-82.
- K. Masuda et al., “Commissioning of IFMIF Prototype Accelerator Towards CW Operation”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 319-323.
- P. Krejcik et al., “SCU Development at the LCLS for Future FELs”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH1D3, unpublished.
- M. Lesourd, E. Plouviez, L. Farvacque, and J. M. Filhol, “DAMPING LINK FOR MAGNET GIRDER ASSEMBLY AND E-BEAM STABILITY IMPROVEMENT AT THE ESRF”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WECM01, pp. XX-XX.
- F. Gerigk et al., “Development Status of the Pi-Mode Accelerating Structure (PIMS) for Linac4”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP064, pp. 939-941.
- M. P. Kelly, S. M. Gerbick, D. R. Olis, and A. M. Rowe, “Surface Processing Facilities for Superconducting RF Cavities at ANL”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP026, pp. 839-841.
- J. Bernardini et al., “Integration of computer vision system to track the alignment SRF cavities into the test cryostat for PIP-II at Fermilab”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 191-194.
- C. Rohde and K. Bishofberger, “Building a MOPA laser for H- beam shaping”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7364, this conference.
- H. Jenhani et al., “Implementation of the Test Bench for the PIP-II LB650 Cryomodules at CEA”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB057, pp. 243-247.
- D. Passarelli et al., “Test Results of the Prototype SSR1 Cryomodule for PIP-II at Fermilab”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4461-4465.
- J. M. Arnesano and S. Döbert, “Design of an X-Band Bunching and Accelerating System for AWAKE Run 2”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 458-461.
- S. L. Bogomolov et al., “Research on Metallic Ion Beam Production With Electron Cyclotron Resonance Ion Sources”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 62-65.
- K. M. Chen et al., “Beam Orbit Shift Due to BPM Thermal Deformation Using Machine Learning”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2577-2579.
- S. A. Lewis, “Elements of Control System Longevity”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper FOPA04, pp. 736-738.
- D. Naito, Y. Honda, T. Miyajima, and N. Yamamoto, “Production and Performance Evaluation of a Compact Deflecting Cavity to Measure the Bunch Length in the cERL”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1023-1026.
- A. Hernandez and M. Bobrek, “GPS IRIG-B over fiber links: an alternative to NTP”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 673-678.
- M. Gyr, B. Henrist, J. M. Jimenez, J.-M. Lacroix, and S. Sgobba, “Aperture and Field Constraints for the Vacuum System in the LHC Injection Septa”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE042, pp. 2732-2734.
- P. Wang et al., “Experimental Study on PM-AM Method in Pulse Compression System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4230-4232.
- L. Nadolski et al., “SOLEIL II project: entrance in the construction phase”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB074, pp. 212-215.
- J. Conrad et al., “Improving the Superconducting Cavities and Operational Findings at the S-DALINAC”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP006, pp. 395-397.
- Y. Yu, K. Xuan, C. Li, G. Liu, and W. Xu, “Initial application of machine learning for beam parameter optimization at the Hefei Light Source II”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA012, pp. 3974-3977.
- G. Devanz, M. Baudrier, E. Cenni, L. Maurice, and O. Piquet, “Instrumentation for High Performance Cavities and Cryomodule Field Emission Analysis”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper FRIBA02, pp. 978-985.
- H. Jagdfeld et al., “Vacuum- and Bake-Out-Testbenches for the HESR at FAIR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3366-3368.
- M.-H. Stodel et al., “Commissioning of the S3 Spectrometer: advances, challenges and outlook”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOC01, pp. 26-29.
- N. Lentz, B. Fishler, U. Farooq, and Z. Lentz, “A motion control system for fly scans synchronized to X-ray pulses”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 312-320.
- G. Z. Georgiev et al., “Beam Preparation with Temporally Modulated Photocathode Laser Pulses for a Seeded THz FEL”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2866-2869.
- A. D. Tran, X. Gu, and Y. Hao, “RHIC Electron Beam Cooling Analysis Using Principle Component and Autoencoder Analysis”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 260-262.
- J. Schaffran, S. Aderhold, D. Reschke, L. Steder, N. Walker, and L. Monaco, “Analysis of the Test Rate for European XFEL Series Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB079, pp. 316-318.
- P. Cameron et al., “The RHIC Tune Measurement System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA102, pp. 2117-2119.
- A. Lueangaramwong et al., “Numerical Study of Beam Dynamics in PITZ Bunch Compressor”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3285-3288.
- C. Song, S. Gu, and W. Huang, “Study and simulation of cavity bunch length monitor based on monopole mode”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA005, pp. 3962-3965.
- S. Yue, P. A. Arrutia Sota, C. Bracco, Y. Dutheil, and A. Lechner, “Beam dump transfer line design in FCC-ee”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM051, pp. 445-448.
- R. Biscardi and G. Ramirez, “RF System for Bunch Lengthening”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPP03, pp. 1660-1662.
- D. Naito, S. Sakanaka, T. Takahashi, T. Yamaguchi, and N. Yamamoto, “Design Consideration of a Longitudinal Kicker Cavity for Compensating Transient Beam Loading Effect in Synchrotron Light Sources”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1027-1030.
- S. H. Kim, E. L. Black, J. M. Jagger, and K. M. Thompson, “Fabrication and Tests of Prototype Quadrupole Magnets for the Storage Ring of the Advanced Photon Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2375-2378.
- K. Winter, A. Gerbershagen, M. Niemand, and O. Kuiken, “Parallel control systems: an efficient and low risk approach for a migration from Vsystem to EPICS”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 336-343.
- C.-K. Huang et al., “Modeling of Nonlinear Beam Dynamics via a Novel Particle-Mesh Method and Surrogate Models with Symplectic Neural Networks”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 462-464.
- L. Segui et al., “Characterization and First Beam Loss Detection with One ESS-nBLM System Detector”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 29-35.
- T. Roy, “Advances in SRF Qubit Architectures for Quantum Computing”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper FRIYA01, unpublished.
- S. M. Wei et al., “Beam Extraction System for CYCIAE-14”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP026, pp. 105-107.
- M. Bai et al., “Observations of Snake Resonance in RHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP044, pp. 2839-2841.
Back to search