JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. V. Hoover, “Grid-Controlled Power Tubes in Particle-Accelerator Applications”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 76-86. 
[n]	S. A. K. Wijethunga, J. S. Eldred, E. Pozdeyev, and C.-Y. Tan, “Electron Cloud Measurements in Fermilab Booster”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 556-559. doi:10.18429/JACoW-NAPAC2022-WEXD6
[n]	G. J. Hirst, S. P. Jamison, L. B. Jones, A. J. Moss, and P. J. Phillips, “Timing and Synchronisation Considerations for the NLS Project”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROA04, pp. 776-779. 
[n]	F. J. Decker et al., “Measured Emittance versus Store Time in the SLC Damping Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 342-345. 
[n]	V. O. Kostroun and C. M. Gulliford, “Radiation Limits on Permanent Magnets in CBETA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 745-747. doi:10.18429/JACoW-IPAC2019-MOPRB075
[n]	B. P. Xiao, M. Blaskiewicz, and T. Xin, “Anomalous Skin Effect Study of Normal Conducting Film”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1119-1121. doi:10.18429/JACoW-IPAC2021-MOPAB360
[n]	J. Pfingstner, M. Hofbaur, and D. Schulte, “Adaptive Scheme for the CLIC Orbit Feedback”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB040, pp. 2776-2778. 
[n]	J. W. Wang and G. A. Loew, “Measurements of Ultimate Accelerating Gradients in the SLAC Disk-Loaded Structure”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2915-2918. 
[n]	M. K. Craddock, “Critical Beam-Intensity Issues in Cyclotrons - Overview of the Santa Fe Workshop”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper E-02, pp. 377-380. 
[n]	M. Sapinski, B. Dehning, and A. Priebe, “LHC Beam Loss Measurements and Quench Level Abort Threshold Accuracy”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB069, pp. 2854-2856. 
[n]	M. Re et al., “Production of Inorganic Thin Scintillating Films for Ion Beam Monitoring Devices”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT002, pp. 808-810. 
[n]	J. A. Clarke, J. N. Corlett, M. W. Poole, S. L. Smith, V. P. Suller, and L. A. Welbourne, “The Linear Latticed Design of an Advanced VUV/SXR Photon Source for Daresbury”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 679-682. 
[n]	M. Menna, G. Cuttone, and M. Re, “Production of Radioactive Ion Beams for the EXCYT Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT060, pp. 1291-1293. 
[n]	Z. Duan, N. Wang, and H. S. Xu, “Simulations of the Injection Transient Instabilities for the High Energy Photon Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1524-1527. doi:10.18429/JACoW-IPAC2019-TUPGW053
[n]	P. Bertrand and A. Savalle, “Post-acceleration of High Intensity RIB through the CIME Cyclotron in the Frame of the SPIRAL2 Project at GANIL”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper THM1CIO01, pp. 354-358. 
[n]	O. I. Meshkov et al., “Experimental Comparison of Performance of Various Fluorescent Screens Applied for Relativistic Electron/Positron Beam Imaging”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOB02, pp. 558-560. 
[n]	S. Schriber, “Survey of Proposed High Intensity Accelerators and their Applications”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 213-218. 
[n]	R. M. Franks, K. Hernandez, D. Otting, T. Henderson, D. Plate, and R. A. Rimmer, “Mechanical Design and Fabrication Processes for the ALS Third-Harmonic Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP61, pp. 803-805. 
[n]	M. Ferianis, S. Bassanese, G. D'Auria, C. Deibele, and M. Poggi, “Characterisation of Fast Faraday Cups at the ELETTRA Linac”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM10, pp. XX-XX. 
[n]	M. Vogt et al., “The FLASH 2020+ Upgrade Project”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 354-360. doi:10.18429/JACoW-SRF2023-TUIAA02
[n]	O. Kugeler, W. Anders, J. Knobloch, and A. Neumann, “Improving the Intrinsic Quality Factor of SRF Cavities by Thermal Cycling”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO011, pp. 724-727. 
[n]	R. Ferdinand, J.-M. Lagniel, P. Mattei, and S. Nath, “Optimization of RFQ Design”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP23G, pp. 1106-1108. 
[n]	G. W??stefeld et al., “Coherent THz Measurements at the Metrology Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA015, pp. 2508-2510. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search