Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Beechy, D. Bogert, S. Segler, and T. Watts, “A Microprocessor Based Function Generator for Superconducting Dipole Correction Coils”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2311-2314.
[n] P. Krkoti et al., “RF Characterisation of New Coatings for Future Circular Collider Beam Screens”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2453-2456. doi:10.18429/JACoW-IPAC2021-TUPAB399
[n] L. M. Volpe, G. V. Claudiano, R. R. Geraldes, S. A. L. Luiz, and A. C. Pinto, “Optimization Method Using Thermal and Mechanical Simulations for Sirius High-Stability Mirrors”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 273-276. doi:10.18429/JACoW-MEDSI2018-WEPH31
[n] W. P. Leemans, P. Volfbeyn, L. Archambault, P. Catravas, S. Dimaggio, and E. Esarey, “Channel Guiding for Laser Wakefield Accelerators”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEBL2, pp. 325-329.
[n] J. Valerian et al., “Optimising focusing parameters of very high energy electron beams for radiotherapy using Monte Carlo simulation”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB042, unpublished.
[n] N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4376-4379. doi:10.18429/JACoW-IPAC2019-FRXXPLS3
[n] S. Bartolome-Jimenez and G. Trinquart, “Installation of the LHC Experimental Insertions”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT007, pp. 1828-1830.
[n] R. Lange, R. A. Elliot, B. Kuner, K. Vestin, C. Winkler, and D. Zimoch, “Integrating OPC UA Devices in EPICS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 184-187. doi:10.18429/JACoW-ICALEPCS2021-MOPV026
[n] I. D. Lyapin, O. Karamyshev, G. A. Karamysheva, V. Malinin, and D. Popov, “The Impact of Trajectory-Shaped Coil on the Beam Dynamics in the SC230 Superconducting Cyclotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2002-2004. doi:10.18429/JACoW-IPAC2021-TUPAB240
[n] S. Iwata et al., “Upgrade of Septum Magnets for Fast Extraction in J-Parc Main Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2103-2105. doi:10.18429/JACoW-IPAC2022-WEPOTK024
[n] J. L. Erickson and D. Rees, “Operational Status and Life Extension Plans for the Los Alamos Neutron Science Center (LANSCE)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP224, pp. 1906-1908.
[n] T. Ohkawa and T. Katayama, “Design of Booster Synchrotron for MUSES”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W025, pp. 1024-1026.
[n] J. B. Rosenzweig, S. Anderson, X. Ding, and D. Yu, “The Effects of RF Asymmetries on Photoinjector Beam Quality”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA65, pp. 2042-2044.
[n] T. Zhang et al., “Numerical Investigations of Transverse Gradient Undulator Based Novel Light Sources”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO84, pp. 152-155.
[n] M. Komiyama et al., “Performance Verification of New Machine Protection System Prototype for RIKEN RI Beam Factory”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 742-745. doi:10.18429/JACoW-ICALEPCS2021-WEPV038
[n] D. Shu et al., “Mechanical Design of a New Precision Alignment Apparatus for Compact X-ray Compound Refractive Lens Manipulator”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 168-172. doi:10.18429/JACoW-MEDSI2018-WEOPMA04
[n] L. M. Bollinger, “Invited Paper: Present Status and Probable Future Capabilities of Heavy-Ion Linear Accelerators”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper K02, pp. 504-510.
[n] R. M. Jones et al., “The Dipole Wakefield for a Rounded Damped Detuned Linear Accelerator with Optimised Cell-to-Manifold Coupling”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4092, pp. 282-284.
[n] N. Delerue et al., “Toward low multiplicity energy controllable beams at the CLEAR facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM093, unpublished.
[n] N. Fietier and C. Bieth, “Model Measurements and Preliminary Design of the R. F. Cavities for the EULIMA Cyclotron Concept”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 964-967.
[n] R. R. Geraldes et al., “The FPGA-Based Control Architecture, EPICS Interface and Advanced Operational Modes of the High-Dynamic Double-Crystal Monochromator for Sirius/LNLS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 370-375. doi:10.18429/JACoW-ICALEPCS2021-TUPV004
[n] A. Xiao and B. X. Yang, “Benchmarking of Touschek Beam Lifetime Calculations for the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 940-942. doi:10.18429/JACoW-NAPAC2016-WEPOB21
[n] I. Stevani, N. Milas, X. R. Resende, and L. N. P. Vilela, “High Level Applications for Sirius”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 47-49. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO22
[n] N. O. Strelnikov, E. Gluskin, I. Vasserman, and J. Z. Xu, “Performance of the Full-Length Vertical Polarizing Undulator Prototype for LCLS-II”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 946-949. doi:10.18429/JACoW-NAPAC2016-WEPOB23
[n] E. Al-Dmour, D. Einfeld, M. J. Grabski, and R. Martin, “The Status of the Vacuum System of ALBA Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP004, pp. 354-356.
[n] S. Chattopadhyay, S. T. Corneliussen, and G. P. Williams, “Emerging Concepts, Technologies and Opportunities for Mezzo-scale Terahertz and Infrared Facilities”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF084, pp. 2454-2456.
[n] S. Hunt, “The Design of Very High Availability Accelerator Control Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP519, pp. XX-XX.
[n] Z. T. Zhao, H. Ding, and H. G. Xu, “Commissioning of the Shanghai Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO3PBI04, pp. 55-59.
[n] J. Bernardini et al., “Final Design of the Production SSR1 Cryomodule for PIP-II Project at Fermilab”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 736-740. doi:10.18429/JACoW-SRF2023-WEPWB066
For LaTeX
Use Complete Form
For BibTeX
References
- D. Beechy, D. Bogert, S. Segler, and T. Watts, “A Microprocessor Based Function Generator for Superconducting Dipole Correction Coils”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2311-2314.
- P. Krkoti et al., “RF Characterisation of New Coatings for Future Circular Collider Beam Screens”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2453-2456.
- L. M. Volpe, G. V. Claudiano, R. R. Geraldes, S. A. L. Luiz, and A. C. Pinto, “Optimization Method Using Thermal and Mechanical Simulations for Sirius High-Stability Mirrors”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 273-276.
- W. P. Leemans, P. Volfbeyn, L. Archambault, P. Catravas, S. Dimaggio, and E. Esarey, “Channel Guiding for Laser Wakefield Accelerators”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEBL2, pp. 325-329.
- J. Valerian et al., “Optimising focusing parameters of very high energy electron beams for radiotherapy using Monte Carlo simulation”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB042, this conference.
- N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4376-4379.
- S. Bartolome-Jimenez and G. Trinquart, “Installation of the LHC Experimental Insertions”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT007, pp. 1828-1830.
- R. Lange, R. A. Elliot, B. Kuner, K. Vestin, C. Winkler, and D. Zimoch, “Integrating OPC UA Devices in EPICS”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 184-187.
- I. D. Lyapin, O. Karamyshev, G. A. Karamysheva, V. Malinin, and D. Popov, “The Impact of Trajectory-Shaped Coil on the Beam Dynamics in the SC230 Superconducting Cyclotron”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2002-2004.
- S. Iwata et al., “Upgrade of Septum Magnets for Fast Extraction in J-Parc Main Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2103-2105.
- J. L. Erickson and D. Rees, “Operational Status and Life Extension Plans for the Los Alamos Neutron Science Center (LANSCE)”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP224, pp. 1906-1908.
- T. Ohkawa and T. Katayama, “Design of Booster Synchrotron for MUSES”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W025, pp. 1024-1026.
- J. B. Rosenzweig, S. Anderson, X. Ding, and D. Yu, “The Effects of RF Asymmetries on Photoinjector Beam Quality”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA65, pp. 2042-2044.
- T. Zhang et al., “Numerical Investigations of Transverse Gradient Undulator Based Novel Light Sources”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO84, pp. 152-155.
- M. Komiyama et al., “Performance Verification of New Machine Protection System Prototype for RIKEN RI Beam Factory”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 742-745.
- D. Shu et al., “Mechanical Design of a New Precision Alignment Apparatus for Compact X-ray Compound Refractive Lens Manipulator”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 168-172.
- L. M. Bollinger, “Invited Paper: Present Status and Probable Future Capabilities of Heavy-Ion Linear Accelerators”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper K02, pp. 504-510.
- R. M. Jones et al., “The Dipole Wakefield for a Rounded Damped Detuned Linear Accelerator with Optimised Cell-to-Manifold Coupling”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4092, pp. 282-284.
- N. Delerue et al., “Toward low multiplicity energy controllable beams at the CLEAR facility”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM093, this conference.
- N. Fietier and C. Bieth, “Model Measurements and Preliminary Design of the R. F. Cavities for the EULIMA Cyclotron Concept”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 964-967.
- R. R. Geraldes et al., “The FPGA-Based Control Architecture, EPICS Interface and Advanced Operational Modes of the High-Dynamic Double-Crystal Monochromator for Sirius/LNLS”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 370-375.
- A. Xiao and B. X. Yang, “Benchmarking of Touschek Beam Lifetime Calculations for the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 940-942.
- I. Stevani, N. Milas, X. R. Resende, and L. N. P. Vilela, “High Level Applications for Sirius”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 47-49.
- N. O. Strelnikov, E. Gluskin, I. Vasserman, and J. Z. Xu, “Performance of the Full-Length Vertical Polarizing Undulator Prototype for LCLS-II”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 946-949.
- E. Al-Dmour, D. Einfeld, M. J. Grabski, and R. Martin, “The Status of the Vacuum System of ALBA Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP004, pp. 354-356.
- S. Chattopadhyay, S. T. Corneliussen, and G. P. Williams, “Emerging Concepts, Technologies and Opportunities for Mezzo-scale Terahertz and Infrared Facilities”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF084, pp. 2454-2456.
- S. Hunt, “The Design of Very High Availability Accelerator Control Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP519, pp. XX-XX.
- Z. T. Zhao, H. Ding, and H. G. Xu, “Commissioning of the Shanghai Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO3PBI04, pp. 55-59.
- J. Bernardini et al., “Final Design of the Production SSR1 Cryomodule for PIP-II Project at Fermilab”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB066, pp. 736-740.
Back to search