Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Corlett, R. Rimmer, N. Holtkamp, A. Moretti, and H. Kirk, “A High Power RF Coupler Design for Muon Cooling RF Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP98, pp. 896-898.
[n] H. Ishimaru, Z. Igarashi, K. Muto, and S. Shibata, “Beam Profile Measurements for KEK 12 GeV Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1821-1824.
[n] Y. Futami et al., “Spot Scanning System with RI Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A17, pp. 2548-2550.
[n] X. Gu et al., “The Effects of the RHIC E-lenses Magnetic Structure Layout on the Proton Beam Trajectory”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP207, pp. 1202-1204.
[n] J. Billan et al., “Performance of Prototypes and Start Up of Series Fabrication of the LHC Arc Quadrupoles”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH086, pp. 3430-3432.
[n] R. Barbini et al., “Spontaneaous Emission as a Test for the Permanent Magnet ENEA Undulator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 552-555.
[n] D. Gancarcik et al., “Energy deposition simulations for a damage experiment with superconducting sample coils”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3696-3699. doi:10.18429/JACoW-IPAC2023-WEPM058
[n] K. Sato, E. Hamada, Y. Hashimoto, S. Igarashi, T. Koseki, and Y. Sato, “Multi-Ribbon Profile Monitor for High Power Proton Beam at J-PARC MR Abort Line”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2561-2563. doi:10.18429/JACoW-IPAC2019-WEPGW039
[n] N. Awaji, T. Iida, Y. Kijima, T. Kishimoto, M. Kodaira, and H. Tsuchidate, “High Current Beam Storage Experiments in SORTEC CR Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 348-351.
[n] R. Tolle et al., “HESR at FAIR: Status of Technical Planning”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN024, pp. 1442-1444.
[n] Y. Luo, W. Fischer, X. Gu, S. Tepikian, and D. Trbojevic, “The Effects of Betatron Phase Advances on Beam-beam and its Compensation in RHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP058, pp. 2232-2234.
[n] T. T. Taniuchi et al., “Upgrade of a Photocathode RF Gun at SPring-8”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS18, pp. XX-XX.
[n] D. S. Day, A. Hahn, C. Prados, and M. Reese, “Improving Throughput and Latency of D-Bus to Meet the Requirements of the Fair Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 809-812. doi:10.18429/JACoW-ICALEPCS2017-TUPHA168
[n] A. Dipace, A. Renieri, and E. Sabia, “2D Simulation of FEL Amplifiers”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 555-557.
[n] X. Gu et al., “DESIGNING A BEAM TRANSPORT SYSTEM FOR RHIC'S ELECTRON LENS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP208, pp. 1205-1207.
[n] V. V. Smaluk, A. Blednykh, K. Ha, Y. Tian, and X. Yang, “A Method of Local Impedance Measurement by Sine-wave Beam Excitation”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 41-43. doi:10.18429/JACoW-IBIC2017-MOPCC03
[n] B. G?Ñlnander et al., “Status of Design Work Towards an Electron Cooler for HESR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP10, pp. 182-186.
[n] J. S. Nielsen, N. Hertel, and S. P. M?©ller, “An Overview of the Proposed Beam Diagnostic for ASTRID2”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD24, pp. 101-103.
[n] H. Ishimaru, Z. Igarashi, H. Nishimura, and S. Shibata, “Beam Size Measurement of 12 GeV Accelarator by Fast Rotary Scraper”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3358-3361.
[n] D. Hunt, K. Kennedy, and T. Stevens, “Design of the PEP-II Low Energy Ring Vacuum System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP13, pp. 2067-2068.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Corlett, R. Rimmer, N. Holtkamp, A. Moretti, and H. Kirk, “A High Power RF Coupler Design for Muon Cooling RF Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP98, pp. 896-898.
- H. Ishimaru, Z. Igarashi, K. Muto, and S. Shibata, “Beam Profile Measurements for KEK 12 GeV Proton Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1821-1824.
- Y. Futami et al., “Spot Scanning System with RI Beam at HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A17, pp. 2548-2550.
- X. Gu et al., “The Effects of the RHIC E-lenses Magnetic Structure Layout on the Proton Beam Trajectory”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP207, pp. 1202-1204.
- J. Billan et al., “Performance of Prototypes and Start Up of Series Fabrication of the LHC Arc Quadrupoles”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH086, pp. 3430-3432.
- R. Barbini et al., “Spontaneaous Emission as a Test for the Permanent Magnet ENEA Undulator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 552-555.
- D. Gancarcik et al., “Energy deposition simulations for a damage experiment with superconducting sample coils”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM058, pp. 3696-3699.
- K. Sato, E. Hamada, Y. Hashimoto, S. Igarashi, T. Koseki, and Y. Sato, “Multi-Ribbon Profile Monitor for High Power Proton Beam at J-PARC MR Abort Line”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2561-2563.
- N. Awaji, T. Iida, Y. Kijima, T. Kishimoto, M. Kodaira, and H. Tsuchidate, “High Current Beam Storage Experiments in SORTEC CR Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 348-351.
- R. Tolle et al., “HESR at FAIR: Status of Technical Planning”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN024, pp. 1442-1444.
- Y. Luo, W. Fischer, X. Gu, S. Tepikian, and D. Trbojevic, “The Effects of Betatron Phase Advances on Beam-beam and its Compensation in RHIC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP058, pp. 2232-2234.
- T. T. Taniuchi et al., “Upgrade of a Photocathode RF Gun at SPring-8”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS18, pp. XX-XX.
- D. S. Day, A. Hahn, C. Prados, and M. Reese, “Improving Throughput and Latency of D-Bus to Meet the Requirements of the Fair Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 809-812.
- A. Dipace, A. Renieri, and E. Sabia, “2D Simulation of FEL Amplifiers”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 555-557.
- X. Gu et al., “DESIGNING A BEAM TRANSPORT SYSTEM FOR RHIC'S ELECTRON LENS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP208, pp. 1205-1207.
- V. V. Smaluk, A. Blednykh, K. Ha, Y. Tian, and X. Yang, “A Method of Local Impedance Measurement by Sine-wave Beam Excitation”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 41-43.
- B. G?Ñlnander et al., “Status of Design Work Towards an Electron Cooler for HESR”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP10, pp. 182-186.
- J. S. Nielsen, N. Hertel, and S. P. M?©ller, “An Overview of the Proposed Beam Diagnostic for ASTRID2”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD24, pp. 101-103.
- H. Ishimaru, Z. Igarashi, H. Nishimura, and S. Shibata, “Beam Size Measurement of 12 GeV Accelarator by Fast Rotary Scraper”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3358-3361.
- D. Hunt, K. Kennedy, and T. Stevens, “Design of the PEP-II Low Energy Ring Vacuum System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP13, pp. 2067-2068.
Back to search