JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. T. Oganessian et al., “Modernization of the U400 Cyclotron at the FLNR JINR”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10012, pp. XX-XX. 
[n]	N. Yu. Kazarinov et al., “Beam Lines for Gas Filled Separator Experiments at DC280 Cyclotron”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 272-275. doi:10.18429/JACoW-RUPAC2018-TUPSA60
[n]	I. A. Ivanenko, B. Gikal, and G. Gulbekyan, “U400 Cyclotron Spiral Inflector with Beam Vertical Focusing Effect”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE012, pp. 4536-4538. 
[n]	A. Tauschwitz et al., “Beam Test of a Plasma Lens for Heavy Ion Beam Focusing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 593-596. 
[n]	M. Stetter et al., “Investigations on a Plasma Lens for Fine Focusing of Heavy-Ion Beams”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 285-288. 
[n]	D. I. Kaltchev, M. K. Craddock, R. V. Servranckx, and J. B. Jeanneret, “Initial Error Analysis for the LHC Collimation Insertions”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA3, pp. 2620-2622. 
[n]	D. Yu, J. Clendenin, Y. Luo, and D. Newsham, “Parmela Simulations of a PWT Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB042, pp. 2126-2128. 
[n]	D. Dowell et al., “Analysis of Slice Emittance Measurements for the SLAC Gun Test Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB027, pp. 2104-2106. 
[n]	Kh. M. Gad et al., “Design study of 70 MeV Separate Sector Cyclotron for KoRIA project”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper TUA1CCO04, pp. 304-307. 
[n]	Z. Li et al., “Advanced Modeling of RF Cavities and Components for e+e- Colliders”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E205, pp. 623-625. 
[n]	H. S. Chang et al., “Control System Design of KIRAMS-13 Cyclotron”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP13003, pp. XX-XX. 
[n]	P. Tallerico et al., “An RF-Driven Lasertron”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-02, pp. 528-530. 
[n]	V. V. Bashevoy et al., “Simulation of the Transmission Efficiency of the DRIBS Transport Lines”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-01, pp. XX-XX. 
[n]	H. S. Kim et al., “Reinforcement Learning Based RF Control System for Accelerator Mass Spectrometry”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 227-229. doi:10.18429/JACoW-CYCLOTRONS2019-TUP030
[n]	R. Sheffield et al., “RF Photoelectron Gun Experimental Performance”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH2-05, pp. 520-522. 
[n]	A. V. Demyanov, S. L. Bogomolov, and V. B. Kutner, “Injector of Multiply Charged Ions for Acclerators and Implanters”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-11, pp. 433-434. 
[n]	H. S. Chang et al., “Negative Hydrogen Acceleration in the Cyclone-30 at KIRAMS”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10007, pp. XX-XX. 
[n]	C. G. Limborg et al., “Comparison of PARMELA Simulations with Longitudinal Emittance Measurements at the SLAC Gun Test Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG022, pp. 3216-3218. 
[n]	I. V. Kalagin et al., “Status of the DC-280 Cyclotron Project”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 363-365. doi:10.18429/JACoW-Cyclotrons2016-THP25
[n]	M. Clausen, P. D. Duval, K.-H. Mess, S. Rettig, and B. Schoeneburg, “Cryogenic Controls at HERA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 334-337. 
[n]	P. R. Bolton et al., “New Design Study and Related Experimental Program for the LCLS RF Photoinjector”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B14, pp. 1642-1644. 
[n]	K. Johnson et al., “Streak Camera as a Diagnostic for High Intensity Cooled Bunched Beams”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1705-1708. 
[n]	G. Gulbekyan, O. N. Borisov, and V. I. Kazacha, “Extraction by Stripping of Heavy Ion Beams from Cyclotrons”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-02, pp. 286-290. 
[n]	B. H. Hong et al., “KIRAMS-13 Target for [18F]Fluoride Production”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99909, pp. XX-XX. 
[n]	D. Yu, J. Clendenin, Y. Luo, D. Newsham, D. Schultz, and A. V. Smirnov, “Development of a Polarized Electron Gun Based on an S-Band PWT Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB043, pp. 2129-2131. 
[n]	I. V. Kalagin et al., “Heavy Ion Cyclotrons of FLNR JINR - Status and Plans”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 60-64. doi:10.18429/JACoW-RUPAC2018-WEXMH02
[n]	S. V. Mitrofanov et al., “DC140 Project: New Dedicated Facility for Applied Science at FLNR Accelerator Complex”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA28, unpublished. 
[n]	M. Giannini et al., “ELETTRA" Vacuum Chamber Design and Fabrication"”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2488-2491. 
[n]	D. H. An et al., “Design of the Central Region in the KIRAMS-13 Cyclotron”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15013, pp. XX-XX. 
[n]	V. I. Lisov et al., “The Extraction System of DC140 Cyclotron”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 213-215. doi:10.18429/JACoW-RuPAC2021-MOPSA51
[n]	V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576. 
[n]	H. W. Kim, J.-S. Chai, B. N. Lee, and J. H. Oh, “Design Study of AVF Magnet for Compact Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP082, pp. 218-220. 
[n]	I. A. Ivanenko, N. Yu. Kazarinov, and V. I. Lisov, “DC140 Cyclotron, Trajectory Analysis of Beam Acceleration and Extraction”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 205-208. doi:10.18429/JACoW-RuPAC2021-MOPSA49
[n]	P. A. Chubunov, V. S. Anashin, I. V. Kalagin, S. V. Mitrofanov, and V. A. Skuratov, “Modern Heavy Ion Based Test Facilities For Spacecrafts Electronics Qualification”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3497-3499. doi:10.18429/JACoW-IPAC2019-THPMP025
[n]	M. N. El-Shazly, G. G. Gulbeikian, A. I. Ivanenko, M. V. Khabarov, and A. V. Tikhomirov, “Vacuum Beam Losses in the Axial Injection Systems of the FLNR Heavy Ion Cyclotrons”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP08K, pp. 2172-2174. 
[n]	S. A. Kostromin et al., “Testing of SC-Magnets of NICA booster synchrotron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3461-3463. doi:10.18429/JACoW-IPAC2017-WEPVA088
[n]	I. A. Ivanenko, I. V. Kalagin, V. I. Kazacha, and N. Yu. Kazarinov, “Getting Uniform Ion Density on Target in High-Energy Beam Line of Cyclotron U-400M with Two”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT007, pp. 335-337. 
[n]	G. G. Gulbekyan et al., “The Project of the HV Axial Injection for the DC-280 Cyclotron at the FLNR JINR”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC08, pp. 333-335. 
[n]	M. Giannini et al., “Design, Construction and Installation of the ELETTRA Injection System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2352-2355. 
[n]	M. N. El-Shazly, M. V. Khabarov, A. I. Ivanenko, and G. G. Gulbekian, “Vacuum Beam Losses in the Axial Injection Systems of the FLNR Heavy Ion Cyclotrons”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P010, pp. 3607-3609. 
[n]	A. Tauschwitz et al., “Experimental Investigations of Plasma Lens Focusing and Plasma Channel Transport of Heavy Ion Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAQ04, pp. 1852-1854. 
[n]	D. H. An et al., “The Stripping Extraction System in the KIRAMS-13 Cyclotron”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15014, pp. XX-XX. 
[n]	N. Yu. Kazarinov et al., “Axial Injection System of DC140 Cyclotron of FLNR JINR”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 209-212. doi:10.18429/JACoW-RuPAC2021-MOPSA50
[n]	N. Yu. Kazarinov et al., “Design and Simulation of the Axial Injection Beam Line of DC140 Cyclotron of FLNR JINR”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1852-1854. doi:10.18429/JACoW-IPAC2021-TUPAB191
[n]	K. Paraschou et al., “Tests of commissioning simulation tools in operation of storage ring light sources”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5076, unpublished. 
[n]	M. Leporis et al., “The New 14 GHz Ion Source for the U-400 Heavy Ion Cyclotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS099, pp. 1732-1734. 
[n]	S. Neff et al., “Heavy Ion Beam Transport in Plasma Channels”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT021, pp. 1183-1185. 
[n]	A. V. Demyanov, S. L. Bogomolov, G. G. Gulbekian, V. B. Kutner, and R. Ts. Oganessian, “Radioactive Beam Injector for Short-Lived Heavy Ions”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-06, pp. 355-358. 
[n]	S. Mitrofanov et al., “SEE Testing Facilities at FLNR Accelerators Complex: State of the Art and Future Plans”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WECA12, pp. 152-154. 
[n]	V. S. Anashin, P. A. Chubunov, G. A. Protopopov, S. V. Mitrofanov, V. A. Skuratov, and Yu. G. Teterev, “Estimation of Heavy Ion Beam Parameters During Single Event Effects Testing”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 94-97. doi:10.18429/JACoW-IBIC2017-MOPCF10
[n]	I. V. Kalagin et al., “SHE Factory: Cyclotron Facility for Super Heavy Elements Research”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 305-309. doi:10.18429/JACoW-CYCLOTRONS2019-THC01
[n]	K. Ko, T. Raubenheimer, and B. McCandless, “SLAC Parallel Tracking Code Development and Applications”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA16, pp. 775-778. 
[n]	D. H. Ha et al., “Design and Manufacture of 10 kW, 83.2 MHz 4-way Power Combiner for Solid State Amplifier”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 97-99. doi:10.18429/JACoW-CYCLOTRONS2019-MOP029
[n]	V. I. Lisov et al., “Design and Simulation of the Extraction System of DC140 Cyclotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1849-1851. doi:10.18429/JACoW-IPAC2021-TUPAB190

For LaTeX

Use Complete Form

For BibTeX

References

Back to search