Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y.-H. Kim, Y.-S. Cho, H.-J. Kwon, and M.-Y. Park, “Fabrication and Test of the Drift Tubes for PEFP 20 MeV DTL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT017, pp. 1552-1554.
[n] S. H. Kim, Y. H. Kim, H. S. Kim, K. O. Lee, and K. H. Chung, “Design of the Superconducting Linac for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E203, pp. 295-297.
[n] M. M. Pande, V. K. Handu, N. R. Patel, V. Rao, K. R. Shinde, and A. Soni, “Development of A 35 Kw Power Amplifier At 350 Mhz For RFQ Accelerator Based Neutron Generator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA145, pp. 526-528.
[n] P. Hurh, M. Gormley, J. S. Hangst, J. Howell, and S. O, “A Radiation-hardened Pulsed Magnet for the Tevatron-I Target Station”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2360-2363.
[n] N. H. Hu and T. Aihara, “Compact Accelerator Based Epithermal Neutron Source and Its Application for Cancer Therapy”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEBI02, pp. 176-178.
[n] D. B. Cline, “Overview of μ+μ- Collider Options”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR21, pp. 846-849.
[n] S. Imajo et al., “The Development of a Low Energy Neutron Accelerator for Rebunching Pulsed Neutrons”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 751-753. doi:10.18429/JACoW-IPAC2014-MOPRI065
[n] D. Martin et al., “Status on Linacs Developed at Institute of Atomic Physics - Bucharest, Romania”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W006, pp. 1123-1125.
[n] C. F. Crowley et al., “LBNF 1.2 MW Target: Conceptual Design & Fabrication”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3315-3317. doi:10.18429/JACoW-IPAC2015-WEPTY023
[n] G. Penn, “Prospects of Cascaded Harmonic Generation FELs”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUBAU01, pp. 281-286.
[n] I. P. Parajuli, G. Ciovati, W. A. Clemens, J. R. Delayen, A. V. Gurevich, and J. Nice, “Design and Commissioning of a Magnetic Field Scanning System for SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 547-549. doi:10.18429/JACoW-SRF2019-TUP052
[n] H. E. Conzett, “Influence of Cyclotron Beam Properties on Experiments”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-001, pp. XX-XX.
[n] S. M. Pruss et al., “Hybrid Permanent Quadrupoles for the 8 GeV Transfer Line at Fermilab”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P032, pp. 3286-3287.
[n] C. I. Clarke et al., “LCLS-II Beam Containment System for Radiation Safety”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 187-192. doi:10.18429/JACoW-FLS2018-THP1WD02
[n] H. Singh, H. Witte, S. Notaro, and V. Teotia, “Extended Jiles-Atherton hysteresis model to accurately predict fields in a Rapid Cycling Synchrotron dipole magnet”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1510-1513. doi:10.18429/JACoW-IPAC2024-TUPR43
[n] Y. Sugiyama, M. Yoshii, and F. Tamura, “Measurement of the Longitudinal Coupled Bunch Instabilities in the J-PARC Main Ring”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 225-228. doi:10.18429/JACoW-IBIC2017-TUPCF10
[n] S. Barbanotti, H. Hintz, K. Jensch, and W. Maschmann, “Quality Control of the Vessel and Cold Mass Production for the 1.3 GHz XFEL Cryomodules”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP031, pp. 168-170.
For LaTeX
Use Complete Form
For BibTeX
References
- Y.-H. Kim, Y.-S. Cho, H.-J. Kwon, and M.-Y. Park, “Fabrication and Test of the Drift Tubes for PEFP 20 MeV DTL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT017, pp. 1552-1554.
- S. H. Kim, Y. H. Kim, H. S. Kim, K. O. Lee, and K. H. Chung, “Design of the Superconducting Linac for KOMAC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E203, pp. 295-297.
- M. M. Pande, V. K. Handu, N. R. Patel, V. Rao, K. R. Shinde, and A. Soni, “Development of A 35 Kw Power Amplifier At 350 Mhz For RFQ Accelerator Based Neutron Generator”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA145, pp. 526-528.
- P. Hurh, M. Gormley, J. S. Hangst, J. Howell, and S. O, “A Radiation-hardened Pulsed Magnet for the Tevatron-I Target Station”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2360-2363.
- N. H. Hu and T. Aihara, “Compact Accelerator Based Epithermal Neutron Source and Its Application for Cancer Therapy”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEBI02, pp. 176-178.
- D. B. Cline, “Overview of μ+μ- Collider Options”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR21, pp. 846-849.
- S. Imajo et al., “The Development of a Low Energy Neutron Accelerator for Rebunching Pulsed Neutrons”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 751-753.
- D. Martin et al., “Status on Linacs Developed at Institute of Atomic Physics - Bucharest, Romania”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W006, pp. 1123-1125.
- C. F. Crowley et al., “LBNF 1.2 MW Target: Conceptual Design & Fabrication”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3315-3317.
- G. Penn, “Prospects of Cascaded Harmonic Generation FELs”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUBAU01, pp. 281-286.
- I. P. Parajuli, G. Ciovati, W. A. Clemens, J. R. Delayen, A. V. Gurevich, and J. Nice, “Design and Commissioning of a Magnetic Field Scanning System for SRF Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 547-549.
- H. E. Conzett, “Influence of Cyclotron Beam Properties on Experiments”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-001, pp. XX-XX.
- S. M. Pruss et al., “Hybrid Permanent Quadrupoles for the 8 GeV Transfer Line at Fermilab”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P032, pp. 3286-3287.
- C. I. Clarke et al., “LCLS-II Beam Containment System for Radiation Safety”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 187-192.
- H. Singh, H. Witte, S. Notaro, and V. Teotia, “Extended Jiles-Atherton hysteresis model to accurately predict fields in a Rapid Cycling Synchrotron dipole magnet”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR43, pp. 1510-1513.
- Y. Sugiyama, M. Yoshii, and F. Tamura, “Measurement of the Longitudinal Coupled Bunch Instabilities in the J-PARC Main Ring”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 225-228.
- S. Barbanotti, H. Hintz, K. Jensch, and W. Maschmann, “Quality Control of the Vessel and Cold Mass Production for the 1.3 GHz XFEL Cryomodules”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP031, pp. 168-170.
Back to search