Favourites
For Word
[n] P. Hamel et al., “ESS RFQ: Installation and Tuning at Lund”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1372-1374. doi:10.18429/JACoW-IPAC2021-TUPAB016
[n] S. E. Toporkov, A. B. Buleiko, and M. V. Lalayan, “Field Optimization Technique of the Multigap H-mode Resonators”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB04, pp. 162-163.
[n] W. J. Song et al., “Online Measurement of Bunch Lengths and Fill-pattern in the PLS-II Storage Ring Using a Fast Photodiode”, presented at the IPAC'22, Bangkok, Thailand, Jun. 2022, paper THOYGD3, unpublished.
[n] A. M. Fadeev, V. N. Belyaev, A. A. Blinnikov, S. M. Polozov, and E. A. Perelstein, “RF Power and Control Systems for Phased Dipoles Array System for Hyperthermia”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC038, pp. 524-525.
[n] B. Bravo, J. M. Alvarez, F. Perez, and A. Salom, “1.5 GHz Cavity Design for the CLIC Damping Ring and as Active Third Harmonic Cavity for ALBA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4263-4265. doi:10.18429/JACoW-IPAC2017-THPIK078
[n] R. Taylor, J. Pasternak, R. Appleby, A. Steinberg, S. Sheehy, and E. Benedetto, “Slow Extraction Techniques from Fixed Field Accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 945-948. doi:10.18429/JACoW-IPAC2023-MOPL176
[n] M. Saifulin et al., “ZnO(In) Scintillation Light Spectra Investigation for Heavy Ion Detector Application”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 294-295. doi:10.18429/JACoW-IBIC2022-TUP29
[n] J. W. Angle, G. V. Eremeev, M. J. Kelley, U. Pudasaini, C. E. Reece, and J. Tuggle, “Crystallographic Characterization of Nb?Sn Coatings and N-Doped Niobium via EBSD and SIMS”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 871-875. doi:10.18429/JACoW-SRF2019-THP017
[n] D. Ilia et al., “Novel photoinjector laser providing advanced pulse shaping for FLASH and EuXFEL”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2564-2567. doi:10.18429/JACoW-IPAC2025-THPB027
[n] N. Ito et al., “The R&D Works on the High Intensity Proton Linear Accelerator for Nuclear Waste Transmutation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG09, pp. 339-341.
[n] E. Salehi and M. Katoh, “Bayesian optimization of the dynamic aperture in UVSOR-IV design study”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 173-176. doi:10.18429/JACoW-IPAC2023-MOPA064
[n] P. Boutachkov et al., “Novel Fast Radiation-Hard Scintillation Detectors for Ion Beam Diagnostics”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 515-518. doi:10.18429/JACoW-IBIC2022-WE3I1
[n] S. M. Polozov and T. V. Bondarenko, “Beam Dynamics Simulation in Two Versions of New Photogun for FCC-ee Electron Injector Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1326-1329. doi:10.18429/JACoW-IPAC2017-TUPAB011
[n] A. M. Fadeev, V. N. Belyaev, S. M. Polozov, and E. A. Perelstein, “Cylindrical Phased Dipoles Array for Hyperthermia of Deep-Situated Tumors”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC037, pp. 521-523.
[n] F. Potepan, M. Mignacco, and G. Surace, “The Elettra Man-Machine Interface”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 460-463. doi:10.18429/JACoW-ICALEPCS1991-S13MMI04
[n] P. A. Seidl et al., “Overview of the Scientific Objectives of the High Current Experiment for Heavy-Ion Fusion”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH037, pp. 2932-2934.
[n] A. V. Smirnov et al., “KlyLac Conceptual Design for Borehole Logging”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4808-4811. doi:10.18429/JACoW-IPAC2017-THPVA147
[n] M. V. Lalayan, A. A. Kalashnikova, and S. E. Toporkov, “H-Cavity Based Accelerating Structure for Proton Accelerator”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC010, pp. 464-465.
[n] S. M. Polozov et al., “The Perspective of Jinr Lu-20 Replacement by a Superconducting Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 944-946. doi:10.18429/JACoW-IPAC2016-MOPOY042
[n] A. Shalnov, B.Yu. Bogdanovich, A. Ignatyev, and V. Senyukov, “Application of Accelerated Electron Beams for Rubber and Polymer Modification”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAB13, pp. 125-127.
[n] S. E. Toporkov, “Optimization of Electric Field Distribution Inside Multi-gap CH-Resonator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB05, pp. 164-165.
[n] G. V. Troubnikov et al., “Particle Dynamics in the Low Energy Positron Toroidal Accumulator: First Experiments and Results”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT104, pp. 1396-1398.
[n] A. M. Mihalache, V. Babin, M. R. Leonovici, V. I. R. Niculescu, F. Scarlat, and C. Stancu, “On a Skeleton CASSINI Ovals Current Undulator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH034, pp. 119-120.
[n] A. V. Bakhmutova, A. Golubev, A. V. Kantsyrev, and N. V. Markov, “Development of the Beam Diagnostic System for the Radiobiological Research at the Proton Linear Accelerator I-2”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 508-510. doi:10.18429/JACoW-RUPAC2016-WEPSB065
[n] A. Schnase et al., “Experience with a Broadband VitroPerm-filled Cavity at the Synchrotron COSY”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE092, pp. 2193-2195.
[n] A. M. Fadeev, A. A. Blinnikov, S. M. Ivanov, and S. M. Polozov, “A prototype of a Phased Array for Deep Thermoradiotherapy”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB36, pp. 240-242.
[n] M. M. Pande, V. K. Handu, N. R. Patel, V. Rao, K. R. Shinde, and A. Soni, “Development of A 35 Kw Power Amplifier At 350 Mhz For RFQ Accelerator Based Neutron Generator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA145, pp. 526-528.
[n] D. de Cos et al., “Beam Dynamics Simulations on the ESS Bilbao RFQ”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOODS6, pp. 100-102.
[n] A. Yu. Smirnov, E. V. Ivanov, A. A. Krasnov, S. A. Polikhov, I. Rezanov, and G. B. Sharkov, “72 MHz Solid-state Amplifier Power Test”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2270-2272. doi:10.18429/JACoW-IPAC2014-WEPME008
[n] M. Yamanaka and K. Shimada, “A Novel Manufacture of Niobium SRF Cavities by Cold Spray”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 545-548. doi:10.18429/JACoW-SRF2023-TUPTB052
[n] M. Gusarova et al., “QWR resonator Cavities Electrodynamics Simulations for new Nuclotron-NICA Injector”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 274-276. doi:10.18429/JACoW-RUPAC2016-TUPSA028
[n] R. D. Minea, M. M. Brasoveanu, E. Mazilu, M. R. Nemtanu, C. Oproiu, and N. Radulescu, “Accelerators Use for Irradiation of Fresh Medicinal Herbs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF043, pp. 2371-2373.
[n] W. Wan, C. Gattuso, D. E. Johnson, C. S. Mishra, and J. T. Volk, “Design and Implementation of the Medium-Beta Insert of the Fermilab Recycler Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH308, pp. 3621-3623.
[n] D. Martin et al., “Status on Linacs Developed at Institute of Atomic Physics - Bucharest, Romania”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W006, pp. 1123-1125.
[n] X. S. Geng, L. Ma, P. Shi, and K. R. Ye, “Beam Position Monitoring System for the BEPC Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP001L, pp. 1567-1569.
[n] S. M. Polozov, A. E. Aksentyev, A. A. Kalashnikova, T. Kulevoy, M. V. Lalayan, and S. E. Toporkov, “Study of Normal Conducting Accelerating Structures for Megawatt Proton Driver Linac”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC04, pp. 321-323.
[n] L. Schachter, S. Dobrescu, and K. E. Stiebing, “Microwave Power Saving and Reduced Bremsstrahlung Emission for a High Charge State Ion Production in an ECRIS Equipped with MD Structures”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-18, pp. 111-113.
[n] A. Tauschwitz et al., “Experimental Investigations of Plasma Lens Focusing and Plasma Channel Transport of Heavy Ion Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAQ04, pp. 1852-1854.
[n] K. Soutome, T. Hiraiwa, and H. Tanaka, “Update of Lattice Design of the SPring-8-II Storage Ring Towards 50 pmrad”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 477-480. doi:10.18429/JACoW-IPAC2022-MOPOTK017
[n] V. Balbekov, “Effect of Space Charge on Instabilities”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1A01, pp. 410-414.
[n] A. Shalnov, B.Yu. Bogdanovich, A. Ignatyev, and V. Senyukov, “RF-Power Upgrade Systems with Energy Compression for Electron Linacs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ23, pp. 1572-1574.
[n] Y. Ma et al., “Microphonics Investigation of ARIEL e-Linac Cryomodules”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 370-373. doi:10.18429/JACoW-LINAC2018-TUPO020
[n] C. W. Owen et al., “Status of Efforts to Improve the Transverse Properties of the Fermilab Booster”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2907-2910.
[n] L. R. Prost and P. Derwent, “The State of the Art in Hadron Beam Cooling”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper OPL06, pp. 32-39.
[n] J. Demercastel-Soulier et al., “Improvement of Chemical Etching Capabilities (BCP) for SRF Spoke Resonators at IJCLab”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 590. doi:10.18429/JACoW-SRF2021-WEPCAV002
[n] K. Hatanaka et al., “Development of HTS Magnets for Accelerators”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 294-296. doi:10.18429/JACoW-Cyclotrons2016-THB03
[n] A. N. Parfenov, N. P. Sobenin, and B. V. Zverev, “Analytical Calculation of a Coupler for the Linear Collider Accelerating Section”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2022-2025.
[n] L. Schachter, S. Dobrescu, and K. E. Stiebing, “Optimized Extraction Conditions From High Power ECRIS by Dedicated Dielectric Structures”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT014, pp. 147-149.
[n] D. B. Cline et al., “Intermediate Energy Electron Cooling for Anitoproton Sources Using a Pelletron Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2370-2373.
[n] V. A. Lebedev, P. Derwent, and S. D. Holmes, “An 800 MeV Superconducting Linac to Support Megawatt Proton Operations at Fermilab”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THIOA05, pp. 807-810.
[n] R. M. Thurman-Keup et al., “Commissioning and First Results of the Electron Beam Profiler in the Main Injector at Fermilab”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 330-334. doi:10.18429/JACoW-IBIC2017-WE3AB3
[n] S. M. Polozov, A. M. Fadeev, S. M. Ivanov, and E. A. Perelstein, “Temperature Control System for Thermoradiotherapy Facilities”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 474-476. doi:10.18429/JACoW-RUPAC2016-WEPSB049
[n] M. Boehnke, F.-J. Etzkorn, R. Maier, U. Rindfleisch, A. Schnase, and H. Stockhorst, “Broadband Synchrotron Cavity for COSY with Minimum Size Based on VitroPerm”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP79, pp. 851-853.
[n] A. Salom, B. Bravo, J. Marcos, and F. Perez, “ALBA LLRF Upgrades to Improve Beam Availability”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1022-1024. doi:10.18429/JACoW-IPAC2015-MOPTY042
For LaTeX
Use Complete Form
For BibTeX
References
- P. Hamel et al., “ESS RFQ: Installation and Tuning at Lund”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1372-1374.
- S. E. Toporkov, A. B. Buleiko, and M. V. Lalayan, “Field Optimization Technique of the Multigap H-mode Resonators”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB04, pp. 162-163.
- W. J. Song et al., “Online Measurement of Bunch Lengths and Fill-pattern in the PLS-II Storage Ring Using a Fast Photodiode”, presented at the 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, paper THOYGD3, unpublished.
- A. M. Fadeev, V. N. Belyaev, A. A. Blinnikov, S. M. Polozov, and E. A. Perelstein, “RF Power and Control Systems for Phased Dipoles Array System for Hyperthermia”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC038, pp. 524-525.
- B. Bravo, J. M. Alvarez, F. Perez, and A. Salom, “1.5 GHz Cavity Design for the CLIC Damping Ring and as Active Third Harmonic Cavity for ALBA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4263-4265.
- R. Taylor, J. Pasternak, R. Appleby, A. Steinberg, S. Sheehy, and E. Benedetto, “Slow Extraction Techniques from Fixed Field Accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL176, pp. 945-948.
- M. Saifulin et al., “ZnO(In) Scintillation Light Spectra Investigation for Heavy Ion Detector Application”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 294-295.
- J. W. Angle, G. V. Eremeev, M. J. Kelley, U. Pudasaini, C. E. Reece, and J. Tuggle, “Crystallographic Characterization of Nb?Sn Coatings and N-Doped Niobium via EBSD and SIMS”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 871-875.
- D. Ilia et al., “Novel photoinjector laser providing advanced pulse shaping for FLASH and EuXFEL”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB027, pp. 2564-2567.
- N. Ito et al., “The R&D Works on the High Intensity Proton Linear Accelerator for Nuclear Waste Transmutation”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPG09, pp. 339-341.
- E. Salehi and M. Katoh, “Bayesian optimization of the dynamic aperture in UVSOR-IV design study”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA064, pp. 173-176.
- P. Boutachkov et al., “Novel Fast Radiation-Hard Scintillation Detectors for Ion Beam Diagnostics”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 515-518.
- S. M. Polozov and T. V. Bondarenko, “Beam Dynamics Simulation in Two Versions of New Photogun for FCC-ee Electron Injector Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1326-1329.
- A. M. Fadeev, V. N. Belyaev, S. M. Polozov, and E. A. Perelstein, “Cylindrical Phased Dipoles Array for Hyperthermia of Deep-Situated Tumors”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC037, pp. 521-523.
- F. Potepan, M. Mignacco, and G. Surace, “The Elettra Man-Machine Interface”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S13MMI04, pp. 460-463.
- P. A. Seidl et al., “Overview of the Scientific Objectives of the High Current Experiment for Heavy-Ion Fusion”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH037, pp. 2932-2934.
- A. V. Smirnov et al., “KlyLac Conceptual Design for Borehole Logging”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4808-4811.
- M. V. Lalayan, A. A. Kalashnikova, and S. E. Toporkov, “H-Cavity Based Accelerating Structure for Proton Accelerator”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC010, pp. 464-465.
- S. M. Polozov et al., “The Perspective of Jinr Lu-20 Replacement by a Superconducting Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 944-946.
- A. Shalnov, B.Yu. Bogdanovich, A. Ignatyev, and V. Senyukov, “Application of Accelerated Electron Beams for Rubber and Polymer Modification”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAB13, pp. 125-127.
- S. E. Toporkov, “Optimization of Electric Field Distribution Inside Multi-gap CH-Resonator”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB05, pp. 164-165.
- G. V. Troubnikov et al., “Particle Dynamics in the Low Energy Positron Toroidal Accumulator: First Experiments and Results”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT104, pp. 1396-1398.
- A. M. Mihalache, V. Babin, M. R. Leonovici, V. I. R. Niculescu, F. Scarlat, and C. Stancu, “On a Skeleton CASSINI Ovals Current Undulator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH034, pp. 119-120.
- A. V. Bakhmutova, A. Golubev, A. V. Kantsyrev, and N. V. Markov, “Development of the Beam Diagnostic System for the Radiobiological Research at the Proton Linear Accelerator I-2”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 508-510.
- A. Schnase et al., “Experience with a Broadband VitroPerm-filled Cavity at the Synchrotron COSY”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE092, pp. 2193-2195.
- A. M. Fadeev, A. A. Blinnikov, S. M. Ivanov, and S. M. Polozov, “A prototype of a Phased Array for Deep Thermoradiotherapy”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB36, pp. 240-242.
- M. M. Pande, V. K. Handu, N. R. Patel, V. Rao, K. R. Shinde, and A. Soni, “Development of A 35 Kw Power Amplifier At 350 Mhz For RFQ Accelerator Based Neutron Generator”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA145, pp. 526-528.
- D. de Cos et al., “Beam Dynamics Simulations on the ESS Bilbao RFQ”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOODS6, pp. 100-102.
- A. Yu. Smirnov, E. V. Ivanov, A. A. Krasnov, S. A. Polikhov, I. Rezanov, and G. B. Sharkov, “72 MHz Solid-state Amplifier Power Test”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2270-2272.
- M. Yamanaka and K. Shimada, “A Novel Manufacture of Niobium SRF Cavities by Cold Spray”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB052, pp. 545-548.
- M. Gusarova et al., “QWR resonator Cavities Electrodynamics Simulations for new Nuclotron-NICA Injector”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 274-276.
- R. D. Minea, M. M. Brasoveanu, E. Mazilu, M. R. Nemtanu, C. Oproiu, and N. Radulescu, “Accelerators Use for Irradiation of Fresh Medicinal Herbs”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF043, pp. 2371-2373.
- W. Wan, C. Gattuso, D. E. Johnson, C. S. Mishra, and J. T. Volk, “Design and Implementation of the Medium-Beta Insert of the Fermilab Recycler Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH308, pp. 3621-3623.
- D. Martin et al., “Status on Linacs Developed at Institute of Atomic Physics - Bucharest, Romania”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W006, pp. 1123-1125.
- X. S. Geng, L. Ma, P. Shi, and K. R. Ye, “Beam Position Monitoring System for the BEPC Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP001L, pp. 1567-1569.
- S. M. Polozov, A. E. Aksentyev, A. A. Kalashnikova, T. Kulevoy, M. V. Lalayan, and S. E. Toporkov, “Study of Normal Conducting Accelerating Structures for Megawatt Proton Driver Linac”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC04, pp. 321-323.
- L. Schachter, S. Dobrescu, and K. E. Stiebing, “Microwave Power Saving and Reduced Bremsstrahlung Emission for a High Charge State Ion Production in an ECRIS Equipped with MD Structures”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-18, pp. 111-113.
- A. Tauschwitz et al., “Experimental Investigations of Plasma Lens Focusing and Plasma Channel Transport of Heavy Ion Beams”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAQ04, pp. 1852-1854.
- K. Soutome, T. Hiraiwa, and H. Tanaka, “Update of Lattice Design of the SPring-8-II Storage Ring Towards 50 pmrad”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 477-480.
- V. Balbekov, “Effect of Space Charge on Instabilities”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1A01, pp. 410-414.
- A. Shalnov, B.Yu. Bogdanovich, A. Ignatyev, and V. Senyukov, “RF-Power Upgrade Systems with Energy Compression for Electron Linacs”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ23, pp. 1572-1574.
- Y. Ma et al., “Microphonics Investigation of ARIEL e-Linac Cryomodules”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 370-373.
- C. W. Owen et al., “Status of Efforts to Improve the Transverse Properties of the Fermilab Booster”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2907-2910.
- L. R. Prost and P. Derwent, “The State of the Art in Hadron Beam Cooling”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper OPL06, pp. 32-39.
- J. Demercastel-Soulier et al., “Improvement of Chemical Etching Capabilities (BCP) for SRF Spoke Resonators at IJCLab”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 590.
- K. Hatanaka et al., “Development of HTS Magnets for Accelerators”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 294-296.
- A. N. Parfenov, N. P. Sobenin, and B. V. Zverev, “Analytical Calculation of a Coupler for the Linear Collider Accelerating Section”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2022-2025.
- L. Schachter, S. Dobrescu, and K. E. Stiebing, “Optimized Extraction Conditions From High Power ECRIS by Dedicated Dielectric Structures”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUPOT014, pp. 147-149.
- D. B. Cline et al., “Intermediate Energy Electron Cooling for Anitoproton Sources Using a Pelletron Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2370-2373.
- V. A. Lebedev, P. Derwent, and S. D. Holmes, “An 800 MeV Superconducting Linac to Support Megawatt Proton Operations at Fermilab”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THIOA05, pp. 807-810.
- R. M. Thurman-Keup et al., “Commissioning and First Results of the Electron Beam Profiler in the Main Injector at Fermilab”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 330-334.
- S. M. Polozov, A. M. Fadeev, S. M. Ivanov, and E. A. Perelstein, “Temperature Control System for Thermoradiotherapy Facilities”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 474-476.
- M. Boehnke, F.-J. Etzkorn, R. Maier, U. Rindfleisch, A. Schnase, and H. Stockhorst, “Broadband Synchrotron Cavity for COSY with Minimum Size Based on VitroPerm”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP79, pp. 851-853.
- A. Salom, B. Bravo, J. Marcos, and F. Perez, “ALBA LLRF Upgrades to Improve Beam Availability”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1022-1024.
Back to search