Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Zha et al., “Choke-Mode Damped Structure Design for the CLIC Main Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR015, pp. 1840-1842.
[n] S. Barbanotti et al., “The prototype cryomodule for the EUROTRANS program”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP83, pp. XX-XX.
[n] C. Y. Liao et al., “Design of Machine Protection System for the Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD046, pp. 2618-2620.
[n] M. Akemoto and S. Takeda, “Pulse Modulator for 85 MW Klystron in ATF Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-22, pp. 415-417.
[n] S. S. Kurennoy, “3D Effects in RFQ Accelerators”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP097, pp. 1077-1079.
[n] A. Saini, A. Latina, A. Lunin, K. Ranjan, N. Solyak, and V. P. Yakovlev, “Study of Coupler's Effects on ILC Like Lattice”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD088, pp. 4491-4493.
[n] I. Izotov et al., “ECR Discharge in a Single Solenoid Magnetic Field as a Source of the Wide-Aperture Dense Plasma Fluxes”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 47-49. doi:10.18429/JACoW-ECRIS2020-MOZZO02
[n] M. Yadav, B. Naranjo, C. Welsch, G. Andonian, J. Rosenzweig, and O. Apsimon, “Simulation study of betatron radiation for perturbed beams in plasma”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1564-1566. doi:10.18429/JACoW-IPAC2023-TUPA108
[n] Y. Nakayama, K. Tada, S. Takeda, and M. Yoshioka, “Ground Motion Measurement at J-PARC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH121, pp. 330-332.
[n] P. Gladkikh, E. V. Bulyak, T. Omori, V. A. Skomorokhov, and J. Urakawa, “Gamma-Ray Source for Nuclear Resonance Fluorescence Based on Compton Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA038, pp. 154-156.
[n] N. C. Shipman et al., “A Ferroelectric Fast Reactive Tuner for Superconducting Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 781-788. doi:10.18429/JACoW-SRF2019-WETEB7
[n] F. Gerigk and I. Hofmann, “Beam Dynamics of Non-Equipartitioned Beams in the Case of the SPL Project at CERN”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH014, pp. 2872-2874.
[n] H. Takeda and J. H. Billen, “Recent Developments in the Accelerator Design Code PARMILA”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4047, pp. 156-158.
[n] D. E. Kim, C. W. Chung, I. S. Ko, J.-S. Oh, and K.-H. Park, “Physics Requirement of a PLS-XFEL Undulator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS132, pp. 3592-3594.
[n] T. Petersen et al., “Niobium-tin as a transformative technology for low-beta linacs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2709-2712. doi:10.18429/JACoW-IPAC2024-WEPS09
[n] T. Y. Chung, C. H. Chang, C.-S. Hwang, and H. W. Luo, “Quantitative Analysis of Multipole Errors Induced by Mechanical Deformations of an Undulator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4321-4324. doi:10.18429/JACoW-IPAC2018-THPMK014
[n] Y. Shobuda et al., “A Possible Modification of Ceramic Chambers in the Injection Area at the RCS in J-PARC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3205-3208. doi:10.18429/JACoW-IPAC2021-WEPAB245
[n] Y.-C. Chen, A. Schillaci, O. Chimalpopoca, and R. Agustsson, “Multiphysics design of a high heat-load superconducting undulator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1402-1405. doi:10.18429/JACoW-IPAC2024-TUPG65
[n] G. E. Krafczyk, C. C. Jensen, H. Pfeffer, and G. J. Warchol, “Fermilab's Booster Correction Element Power Supply Silicon Temperature Rise”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP007, pp. 1544-1546.
[n] Y. Chen, “Space Charge Effect of Bunched Beam with Different Density Distributions in Linac”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 765-768.
[n] A. B??chner, F. Gabriel, E. Grosse, P. Michel, W. Seidel, and J. Voigtl?ñnder, “The ELBE-Project at Dresden-Rossendorf”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B04, pp. 732-734.
[n] K. Furukawa, E. Kadokura, A. Kazakov, M. Satoh, and T. Suwada, “Timing System Upgrade for Top-up Injection at KEK Linac”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH115, pp. 3071-3073.
[n] F. Sannibale, D. Filippetto, G. V. Stupakov, and M. S. Zolotorev, “Absolute Bunch Length Measurements at the ALS by Incoherent Synchrotron Radiation Fluctuation Analysis”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOBC02, pp. 2661-2663.
[n] S. S. Kurennoy, “Electromagnetic Modeling of Beam Position and Phase Monitors for LANSCE Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS053, pp. 4111-4113.
[n] X. Wu, U. Wienands, T. Hunter, R. York, and S. Sheynin, “Extraction System Design for the SSC Low Energy Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 393-396.
[n] Z. Z. Li, A. Chao, X. J. Deng, Z. Pan, and C.-X. Tang, “Generalized Longitudinal Strong Focusing: A Ring-Based Beam Manipulation Technique”, in Proc. SAP'23, Xichang, China, Jul. 2023, pp. 85-87. doi:10.18429/JACoW-SAP2023-MOPB037
[n] J. Feikes et al., “Commissioning and Operation of the Metrology Light Source (MLS)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC012, pp. 2010-2012.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Zha et al., “Choke-Mode Damped Structure Design for the CLIC Main Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR015, pp. 1840-1842.
- S. Barbanotti et al., “The prototype cryomodule for the EUROTRANS program”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP83, pp. XX-XX.
- C. Y. Liao et al., “Design of Machine Protection System for the Taiwan Photon Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD046, pp. 2618-2620.
- M. Akemoto and S. Takeda, “Pulse Modulator for 85 MW Klystron in ATF Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-22, pp. 415-417.
- S. S. Kurennoy, “3D Effects in RFQ Accelerators”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP097, pp. 1077-1079.
- A. Saini, A. Latina, A. Lunin, K. Ranjan, N. Solyak, and V. P. Yakovlev, “Study of Coupler's Effects on ILC Like Lattice”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD088, pp. 4491-4493.
- I. Izotov et al., “ECR Discharge in a Single Solenoid Magnetic Field as a Source of the Wide-Aperture Dense Plasma Fluxes”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOZZO02, pp. 47-49.
- M. Yadav, B. Naranjo, C. Welsch, G. Andonian, J. Rosenzweig, and O. Apsimon, “Simulation study of betatron radiation for perturbed beams in plasma”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA108, pp. 1564-1566.
- Y. Nakayama, K. Tada, S. Takeda, and M. Yoshioka, “Ground Motion Measurement at J-PARC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH121, pp. 330-332.
- P. Gladkikh, E. V. Bulyak, T. Omori, V. A. Skomorokhov, and J. Urakawa, “Gamma-Ray Source for Nuclear Resonance Fluorescence Based on Compton Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA038, pp. 154-156.
- N. C. Shipman et al., “A Ferroelectric Fast Reactive Tuner for Superconducting Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 781-788.
- F. Gerigk and I. Hofmann, “Beam Dynamics of Non-Equipartitioned Beams in the Case of the SPL Project at CERN”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH014, pp. 2872-2874.
- H. Takeda and J. H. Billen, “Recent Developments in the Accelerator Design Code PARMILA”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4047, pp. 156-158.
- D. E. Kim, C. W. Chung, I. S. Ko, J.-S. Oh, and K.-H. Park, “Physics Requirement of a PLS-XFEL Undulator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS132, pp. 3592-3594.
- T. Petersen et al., “Niobium-tin as a transformative technology for low-beta linacs”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS09, pp. 2709-2712.
- T. Y. Chung, C. H. Chang, C.-S. Hwang, and H. W. Luo, “Quantitative Analysis of Multipole Errors Induced by Mechanical Deformations of an Undulator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4321-4324.
- Y. Shobuda et al., “A Possible Modification of Ceramic Chambers in the Injection Area at the RCS in J-PARC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3205-3208.
- Y.-C. Chen, A. Schillaci, O. Chimalpopoca, and R. Agustsson, “Multiphysics design of a high heat-load superconducting undulator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG65, pp. 1402-1405.
- G. E. Krafczyk, C. C. Jensen, H. Pfeffer, and G. J. Warchol, “Fermilab's Booster Correction Element Power Supply Silicon Temperature Rise”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP007, pp. 1544-1546.
- Y. Chen, “Space Charge Effect of Bunched Beam with Different Density Distributions in Linac”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 765-768.
- A. B??chner, F. Gabriel, E. Grosse, P. Michel, W. Seidel, and J. Voigtl?ñnder, “The ELBE-Project at Dresden-Rossendorf”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B04, pp. 732-734.
- K. Furukawa, E. Kadokura, A. Kazakov, M. Satoh, and T. Suwada, “Timing System Upgrade for Top-up Injection at KEK Linac”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH115, pp. 3071-3073.
- F. Sannibale, D. Filippetto, G. V. Stupakov, and M. S. Zolotorev, “Absolute Bunch Length Measurements at the ALS by Incoherent Synchrotron Radiation Fluctuation Analysis”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOBC02, pp. 2661-2663.
- S. S. Kurennoy, “Electromagnetic Modeling of Beam Position and Phase Monitors for LANSCE Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS053, pp. 4111-4113.
- X. Wu, U. Wienands, T. Hunter, R. York, and S. Sheynin, “Extraction System Design for the SSC Low Energy Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 393-396.
- Z. Z. Li, A. Chao, X. J. Deng, Z. Pan, and C.-X. Tang, “Generalized Longitudinal Strong Focusing: A Ring-Based Beam Manipulation Technique”, in Proc. 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, pp. 85-87.
- J. Feikes et al., “Commissioning and Operation of the Metrology Light Source (MLS)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC012, pp. 2010-2012.
Back to search