Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. M??ller et al., “Design, Production, and Testing of Superconducting Magnets for the Super-FRS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4128-4131. doi:10.18429/JACoW-IPAC2019-THPTS011
[n] K. Seiya et al., “Flattening the field during injection in the Fermilab booster using dipole corrector magnets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1014-1016. doi:10.18429/JACoW-IPAC2024-TUPC09
[n] Z. Zhang, F. S. Chen, H. Geng, and B. Yin, “The Magnetic Measurement for Low Magnetic Field Stability of Dipole Magnet for CEPC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2917-2920. doi:10.18429/JACoW-IPAC2015-WEPMN003
[n] N. Okuda and K. Yokoya, “Impedance Estimation by Parabolic Partial Differential Equation for Rectangular Taper”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IODN01, pp. 27-29.
[n] A. F. D. Morgan and G. Rehm, “Considerations and Improved Workflow for Simulation of Dissipated Power from Wake Losses”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 202-205. doi:10.18429/JACoW-IBIC2015-MOPB065
[n] Z. Li, Y. Jiao, S. Wang, and Y. Zhao, “Studies on beam instabilities in the storage ring of SAPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1103-1105. doi:10.18429/JACoW-IPAC2023-MOPM049
[n] Y. W. An, L. Huang, S. Wang, and S. Y. Xu, “Magnet Sorting of the CSNS/RCS Dipoles and Quadrupoles”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 106-108. doi:10.18429/JACoW-ICAP2015-WEP21
[n] M. Sanchez Barrueta, R. Bratton, W. Hall, J. Lewellen, and J. Lyles, “High-power amplifier considerations for testing the LAMP RFQ and first DTL cavity”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7346, unpublished.
[n] K. Sugita, P. G. Akishin, E. S. Fischer, A. Mierau, and P. Schnizer, “3D Static and Dynamic Field Quality Calculations for Superconducting SIS100 Corrector Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB027, pp. 337-339.
[n] A. Chmielinska, M. J. Barnes, W. Bartmann, F. Burkart, and B. Goddard, “Preliminary Estimate of Beam Induced Power Deposition in a FCC-hh Injection Kicker Magnet”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3475-3478. doi:10.18429/JACoW-IPAC2017-WEPVA095
[n] S. Cao et al., “Ultra-high spatial resolution in micron scale achieved by a practical cascade high energy electron radiography in HERPL”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1095-1097. doi:10.18429/JACoW-IPAC2025-TUPB057
[n] R. Burke et al., “Pellet Fusion by High Energy Heavy Ions”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1012-1015.
[n] J. M. Filhol, “Status of the ESRF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 8-13.
[n] P. Schnizer, P. G. Akishin, E. S. Fischer, and B. Schnizer, “Theoretical Field Analysis for Superferric Accelerator Magnets Using Elliptic Multipoles and its Advantages”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP105, pp. 1773-1775.
[n] M. K. Kempkes et al., “High Stability Klystron Modulator for Commercial Accelerator Application”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 762-763. doi:10.18429/JACoW-LINAC2022-THPOPA09
[n] J. Gunn, T. Lauritzen, P. F. Pellisier, and R. Sah, “A Precision Surveying System for PEP”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1367-1370.
[n] M. Steck et al., “The Concept of Antiproton Accumulation in the RESR Storage Ring of the FAIR Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC038, pp. 4140-4142.
[n] C. Kim et al., “Single Bunch Collective Effects in PLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH117, pp. 1939-1941.
[n] E. S. Masunov and N. E. Vinogradov, “Axisymmetric RF Focusing Development for Ion Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B09, pp. 836-838.
[n] S. Henderson et al., “The SNS Beam Power Upgrade”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT170, pp. 1527-1529.
[n] C.-S. Fann, J.-P. Chiou, S. Y. Hsu, and K.-B. Liu, “A Kicker Pulse Power Supply with Low Jitter”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT099, pp. 1387-1389.
[n] A. F. D. Morgan and G. Rehm, “A Fast Quadrupole Magnet for Machine Studies at Diamond”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF25, pp. 605-607.
[n] K. Ohmi and S. Matsumoto, “Beam-Photoelectron Instability at KEKB:Applying a Magnetic Field”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D021, pp. 435-437.
[n] G. Chen et al., “Performance of a Low Frequency QWR-Based SRF Gun”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 472. doi:10.18429/JACoW-SRF2021-TUPCAV015
[n] C. J. Richard and S. M. Lidia, “Simulating Non-Relativistic Beams Using Helical Pulse Lines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2288-2290. doi:10.18429/JACoW-IPAC2018-WEPAL049
[n] J. Ma, V. Litvinenko, and G. Wang, “Simulations of Cooling Rate and Diffusion for Coherent Electron Cooling Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2957-2960. doi:10.18429/JACoW-IPAC2018-THPAF006
[n] Q. Qin et al., “Beam dynamics studies in the BEPCII storage rings”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH03, pp. XX-XX.
[n] Q. Luo, T. Liu, C. Zhang, Z. Zhou, and A. Zhang, “Design Progress for Accelerators of a Super Tau Charm Facility in China”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL090, unpublished.
[n] W. Chen, B. Zhang, F. Li, and R. Yang, “Improved design of the emittancemeter for the c-band photoinjector at IHEP”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 554-558. doi:10.18429/JACoW-IBIC2025-TUPMO35
[n] A. Schempp, H. Liebermann, B. Hofmann, and L. Brendel, “Tuner Design for High Power 4-Rod-RFQs”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP10, pp. 617-619.
[n] D. Barr et al., “Beam Diagnostics Instrumentation for the Low-Energy Demonstration Accelerator LEDA: Commissioning and Operational Experience”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A06, pp. 1717-1719.
[n] W. Shields, R. Bartolini, A. F. D. Morgan, G. Rehm, and P. Karataev, “Longitudinal Beam Profile Monitor for Investigating the Microbunching Instability at Diamond Light Source”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC34, pp. 143-146.
[n] D. Wang et al., “The CEPC lattice design with combined dipole magnet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 315-318. doi:10.18429/JACoW-IPAC2018-MOPMF079
[n] J. M. Brennan and M. Blaskiewicz, “Bunched Beam Stochastic Cooling at RHIC”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper MOA1I01, pp. 25-29.
[n] C. H. Chang et al., “Field Characteristics of 9-Pole Adjustabale Phase Hybrid Undulator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP118G, pp. 2564-2566.
[n] A. M. Halling and X. P. Lu, “Observation of the Coalescing of Beam into an Asymmetric RF Bucket by Stochastic Cooling”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 472-474.
[n] C. H. Kuo et al., “Commissioning of New BPM System and its Related Diagnostic System for TLS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP008, pp. 3962-3964.
For LaTeX
Use Complete Form
For BibTeX
References
- H. M??ller et al., “Design, Production, and Testing of Superconducting Magnets for the Super-FRS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4128-4131.
- K. Seiya et al., “Flattening the field during injection in the Fermilab booster using dipole corrector magnets”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC09, pp. 1014-1016.
- Z. Zhang, F. S. Chen, H. Geng, and B. Yin, “The Magnetic Measurement for Low Magnetic Field Stability of Dipole Magnet for CEPC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2917-2920.
- N. Okuda and K. Yokoya, “Impedance Estimation by Parabolic Partial Differential Equation for Rectangular Taper”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IODN01, pp. 27-29.
- A. F. D. Morgan and G. Rehm, “Considerations and Improved Workflow for Simulation of Dissipated Power from Wake Losses”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 202-205.
- Z. Li, Y. Jiao, S. Wang, and Y. Zhao, “Studies on beam instabilities in the storage ring of SAPS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM049, pp. 1103-1105.
- Y. W. An, L. Huang, S. Wang, and S. Y. Xu, “Magnet Sorting of the CSNS/RCS Dipoles and Quadrupoles”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 106-108.
- M. Sanchez Barrueta, R. Bratton, W. Hall, J. Lewellen, and J. Lyles, “High-power amplifier considerations for testing the LAMP RFQ and first DTL cavity”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7346, this conference.
- K. Sugita, P. G. Akishin, E. S. Fischer, A. Mierau, and P. Schnizer, “3D Static and Dynamic Field Quality Calculations for Superconducting SIS100 Corrector Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB027, pp. 337-339.
- A. Chmielinska, M. J. Barnes, W. Bartmann, F. Burkart, and B. Goddard, “Preliminary Estimate of Beam Induced Power Deposition in a FCC-hh Injection Kicker Magnet”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3475-3478.
- S. Cao et al., “Ultra-high spatial resolution in micron scale achieved by a practical cascade high energy electron radiography in HERPL”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB057, pp. 1095-1097.
- R. Burke et al., “Pellet Fusion by High Energy Heavy Ions”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1012-1015.
- J. M. Filhol, “Status of the ESRF”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 8-13.
- P. Schnizer, P. G. Akishin, E. S. Fischer, and B. Schnizer, “Theoretical Field Analysis for Superferric Accelerator Magnets Using Elliptic Multipoles and its Advantages”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP105, pp. 1773-1775.
- M. K. Kempkes et al., “High Stability Klystron Modulator for Commercial Accelerator Application”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 762-763.
- J. Gunn, T. Lauritzen, P. F. Pellisier, and R. Sah, “A Precision Surveying System for PEP”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1367-1370.
- M. Steck et al., “The Concept of Antiproton Accumulation in the RESR Storage Ring of the FAIR Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC038, pp. 4140-4142.
- C. Kim et al., “Single Bunch Collective Effects in PLS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH117, pp. 1939-1941.
- E. S. Masunov and N. E. Vinogradov, “Axisymmetric RF Focusing Development for Ion Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B09, pp. 836-838.
- S. Henderson et al., “The SNS Beam Power Upgrade”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT170, pp. 1527-1529.
- C.-S. Fann, J.-P. Chiou, S. Y. Hsu, and K.-B. Liu, “A Kicker Pulse Power Supply with Low Jitter”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT099, pp. 1387-1389.
- A. F. D. Morgan and G. Rehm, “A Fast Quadrupole Magnet for Machine Studies at Diamond”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF25, pp. 605-607.
- K. Ohmi and S. Matsumoto, “Beam-Photoelectron Instability at KEKB:Applying a Magnetic Field”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D021, pp. 435-437.
- G. Chen et al., “Performance of a Low Frequency QWR-Based SRF Gun”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 472.
- C. J. Richard and S. M. Lidia, “Simulating Non-Relativistic Beams Using Helical Pulse Lines”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2288-2290.
- J. Ma, V. Litvinenko, and G. Wang, “Simulations of Cooling Rate and Diffusion for Coherent Electron Cooling Experiment”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2957-2960.
- Q. Qin et al., “Beam dynamics studies in the BEPCII storage rings”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper MOACH03, pp. XX-XX.
- Q. Luo, T. Liu, C. Zhang, Z. Zhou, and A. Zhang, “Design Progress for Accelerators of a Super Tau Charm Facility in China”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL090, unpublished.
- W. Chen, B. Zhang, F. Li, and R. Yang, “Improved design of the emittancemeter for the c-band photoinjector at IHEP”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 554-558.
- A. Schempp, H. Liebermann, B. Hofmann, and L. Brendel, “Tuner Design for High Power 4-Rod-RFQs”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP10, pp. 617-619.
- D. Barr et al., “Beam Diagnostics Instrumentation for the Low-Energy Demonstration Accelerator LEDA: Commissioning and Operational Experience”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A06, pp. 1717-1719.
- W. Shields, R. Bartolini, A. F. D. Morgan, G. Rehm, and P. Karataev, “Longitudinal Beam Profile Monitor for Investigating the Microbunching Instability at Diamond Light Source”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC34, pp. 143-146.
- D. Wang et al., “The CEPC lattice design with combined dipole magnet”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 315-318.
- J. M. Brennan and M. Blaskiewicz, “Bunched Beam Stochastic Cooling at RHIC”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper MOA1I01, pp. 25-29.
- C. H. Chang et al., “Field Characteristics of 9-Pole Adjustabale Phase Hybrid Undulator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP118G, pp. 2564-2566.
- A. M. Halling and X. P. Lu, “Observation of the Coalescing of Beam into an Asymmetric RF Bucket by Stochastic Cooling”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 472-474.
- C. H. Kuo et al., “Commissioning of New BPM System and its Related Diagnostic System for TLS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP008, pp. 3962-3964.
Back to search