Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Bölte et al., “Simultaneous electron beam acceleration and compression with a radiofrequency cavity in ultrafast electron diffraction experiments”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS026, unpublished.
[n] P. Charrue et al., “Role-Based Access Control for the Accelerator Control System at CERN”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA04, pp. 90-92.
[n] S. Khan et al., “Echo-enabled harmonic generation at electron storage rings”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2036, unpublished.
[n] J. Wei, H. Enokizono, X.-P. Li, H. Okamoto, A. Sessler, and Y. Yuri, “Phonon Modes and the Maintenance Condition of a Crystalline Beam”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT082, pp. 4111-4113.
[n] S. Hermle, D. Einfeld, E. Huttel, and G. Heidenreich, “Layout of the Absorbers for the Synchrotron Light Source ANKA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA121, pp. 1360-1362.
[n] R. Ferdinand et al., “Development of a Permanent Magnet ECR Source to Produce a 5 mA Deuteron Beam at CEA/Saclay”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP73, pp. 192-194.
[n] G. Vandoni et al., “Project management structures, processes, and tools for the HL-LHC project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1656-1659. doi:10.18429/JACoW-IPAC2023-TUPA154
[n] G. Giordano et al., “Beam Dynamics Issues in an Extended Relativistic Klystron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC17, pp. 740-742.
[n] G. Flucke et al., “Status of the Karabo Control and Data Processing Framework”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 938. doi:10.18429/JACoW-ICALEPCS2019-WECPR03
[n] C. Mai et al., “Observation of coherent Terahertz bursts during low-energy operation of DELTA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1061-1063. doi:10.18429/JACoW-IPAC2023-MOPM033
[n] O. Boldt et al., “Manufacturing and Commissioning of Cyclotrons in a Series Production at Varian”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 192-194. doi:10.18429/JACoW-CYCLOTRONS2019-TUP017
[n] M. Schneider et al., “High gradient C-band cryogenic copper silver structures”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 519-522. doi:10.18429/JACoW-IPAC2024-MOPR29
[n] N. Us Saqib, A. Jurado, C. Toy, D. A. Nawaz, and E. Andrade, “Design and commissioning of the upgraded ALS SR RF cavity water control system”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 587-590. doi:10.18429/JACoW-ICALEPCS2025-TUPD030
[n] B. B??sing, A. Held, H. Kaiser, S. Khan, C. Mai, and A. Radha Krishnan, “Progress Towards EEHG Seeding at the DELTA Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1420-1422. doi:10.18429/JACoW-IPAC2022-TUPOMS011
[n] B. B??sing et al., “Optics Studies on the Operation of a New Wiggler and Bunch Shortening at the DELTA Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2772-2774. doi:10.18429/JACoW-IPAC2021-WEPAB079
[n] M. Schneider et al., “REBCO sample testing for a HTS high Q cavity”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3067-3070. doi:10.18429/JACoW-IPAC2023-WEPA183
[n] P. A. Schmelzbach et al., “Steps Towards a 3 mA, 1.8 MW Proton Beam at the PSI Cyclotron Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE035, pp. 2405-2406.
[n] A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
[n] E. Keil, A. Sessler, and D. Trbojevic, “Hadron Cancer Therapy Complex Employing Non-scaling FFAG Accelerator and Fixed Field Gantry Design”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS079, pp. 1681-1683.
[n] P. Lebrun, J. R. Cary, P. Spentzouris, P. Stolz, and S. A. Veitzer, “Accurate Simulation of the Electron Cloud in the Fermilab Main Injector with VORPAL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD015, pp. 1955-1957.
[n] M. Yoon, J. Y. Huang, J. S. Jang, M. Kwon, T. Lee, and S. H. Nam, “Commissioning of the PLS 2 GeV Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG06, pp. 171-173.
[n] S. Khan et al., “Echo-enabled harmonic generation at the DELTA storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1354-1357. doi:10.18429/JACoW-IPAC2024-TUPG50
[n] G. Rakowsky, J. Aspenleiter, R. Carr, R. Ruland, and S. Lidia, “Measurement and Optimization of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA35, pp. 2698-2700.
[n] C. A. Preissner, S. J. Izzo, Z. Liu, and J. Nudell, “Le Guide for Support: A Cookbook for Modeling of Accelerator Structures”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 252-254. doi:10.18429/JACoW-MEDSI2018-WEPH22
[n] G. Wu et al., “ECR Plasma Cleaning: An In-situ Processing Technique for RF Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP49, pp. XX-XX.
[n] J. C. Brunet et al., “Mechanical Design and Layout of the LHC Standard Half-Cell”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P013, pp. 3368-3370.
[n] P. N. Ostroumov, D. Capatina, K.-J. Kim, S. A. Kondrashev, B. Mustapha, and R. Nassiri, “Optimized Design of an Ultra-Low Emittance Injector for Future X-Ray FEL Oscillator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP046, pp. 461-463.
[n] V. P. Ovchinnikov, M. P. Svinin, N. G. Tolstun, and A. S. Ivanov, “New Irradiation Field Shaping Systems of High Voltage Electron Accelerators for Industry”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 555-558.
[n] S. Khan et al., “Echo-enabled harmonic generation at the DELTA storage ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 87-90. doi:10.18429/JACoW-IPAC2025-MOPB007
[n] N. Us Saqib, H. Huang, and M. Lopez, “Upgrading the ALS beamline equipment protection system: software development and implementation”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 594-597. doi:10.18429/JACoW-ICALEPCS2025-TUPD032
[n] D. Teytelman, “Beam Loading Compensation for Super B-Factories”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAC002, pp. 154-158.
[n] A. Wolski and A. Sessler, “Linear and Nonlinear Coupling Using Decoupling Transformations”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH060, pp. 2059-2061.
[n] P. Lebrun and P. H. Garbincius, “Assessing Risk in Costing High-energy Accelerators: from Existing Projects to the Future Linear Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE021, pp. 3392-3394.
[n] P. Micke et al., “An Optical Atomic Clock Based on a Highly Charged Ion”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR1WH01, unpublished.
[n] P. A. Schmelzbach et al., “1.8 MW Upgrade of the PSI Proton Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEOBPA03, pp. 1879-1881.
[n] A. Sessler, E. Henestroza, and S. Yu, “Ion Motion in the Adiabatic Focuser”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH101, pp. 2149-2151.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Bölte et al., “Simultaneous electron beam acceleration and compression with a radiofrequency cavity in ultrafast electron diffraction experiments”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS026, unpublished.
- P. Charrue et al., “Role-Based Access Control for the Accelerator Control System at CERN”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA04, pp. 90-92.
- S. Khan et al., “Echo-enabled harmonic generation at electron storage rings”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2036, this conference.
- J. Wei, H. Enokizono, X.-P. Li, H. Okamoto, A. Sessler, and Y. Yuri, “Phonon Modes and the Maintenance Condition of a Crystalline Beam”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT082, pp. 4111-4113.
- S. Hermle, D. Einfeld, E. Huttel, and G. Heidenreich, “Layout of the Absorbers for the Synchrotron Light Source ANKA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA121, pp. 1360-1362.
- R. Ferdinand et al., “Development of a Permanent Magnet ECR Source to Produce a 5 mA Deuteron Beam at CEA/Saclay”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP73, pp. 192-194.
- G. Vandoni et al., “Project management structures, processes, and tools for the HL-LHC project”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA154, pp. 1656-1659.
- G. Giordano et al., “Beam Dynamics Issues in an Extended Relativistic Klystron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC17, pp. 740-742.
- G. Flucke et al., “Status of the Karabo Control and Data Processing Framework”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 938.
- C. Mai et al., “Observation of coherent Terahertz bursts during low-energy operation of DELTA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM033, pp. 1061-1063.
- O. Boldt et al., “Manufacturing and Commissioning of Cyclotrons in a Series Production at Varian”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 192-194.
- M. Schneider et al., “High gradient C-band cryogenic copper silver structures”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR29, pp. 519-522.
- N. Us Saqib, A. Jurado, C. Toy, D. A. Nawaz, and E. Andrade, “Design and commissioning of the upgraded ALS SR RF cavity water control system”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 587-590.
- B. B??sing, A. Held, H. Kaiser, S. Khan, C. Mai, and A. Radha Krishnan, “Progress Towards EEHG Seeding at the DELTA Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1420-1422.
- B. B??sing et al., “Optics Studies on the Operation of a New Wiggler and Bunch Shortening at the DELTA Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2772-2774.
- M. Schneider et al., “REBCO sample testing for a HTS high Q cavity”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA183, pp. 3067-3070.
- P. A. Schmelzbach et al., “Steps Towards a 3 mA, 1.8 MW Proton Beam at the PSI Cyclotron Facility”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE035, pp. 2405-2406.
- A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
- E. Keil, A. Sessler, and D. Trbojevic, “Hadron Cancer Therapy Complex Employing Non-scaling FFAG Accelerator and Fixed Field Gantry Design”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS079, pp. 1681-1683.
- P. Lebrun, J. R. Cary, P. Spentzouris, P. Stolz, and S. A. Veitzer, “Accurate Simulation of the Electron Cloud in the Fermilab Main Injector with VORPAL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD015, pp. 1955-1957.
- M. Yoon, J. Y. Huang, J. S. Jang, M. Kwon, T. Lee, and S. H. Nam, “Commissioning of the PLS 2 GeV Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPG06, pp. 171-173.
- S. Khan et al., “Echo-enabled harmonic generation at the DELTA storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG50, pp. 1354-1357.
- G. Rakowsky, J. Aspenleiter, R. Carr, R. Ruland, and S. Lidia, “Measurement and Optimization of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA35, pp. 2698-2700.
- C. A. Preissner, S. J. Izzo, Z. Liu, and J. Nudell, “Le Guide for Support: A Cookbook for Modeling of Accelerator Structures”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 252-254.
- G. Wu et al., “ECR Plasma Cleaning: An In-situ Processing Technique for RF Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP49, pp. XX-XX.
- J. C. Brunet et al., “Mechanical Design and Layout of the LHC Standard Half-Cell”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P013, pp. 3368-3370.
- P. N. Ostroumov, D. Capatina, K.-J. Kim, S. A. Kondrashev, B. Mustapha, and R. Nassiri, “Optimized Design of an Ultra-Low Emittance Injector for Future X-Ray FEL Oscillator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP046, pp. 461-463.
- V. P. Ovchinnikov, M. P. Svinin, N. G. Tolstun, and A. S. Ivanov, “New Irradiation Field Shaping Systems of High Voltage Electron Accelerators for Industry”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 555-558.
- S. Khan et al., “Echo-enabled harmonic generation at the DELTA storage ring”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB007, pp. 87-90.
- N. Us Saqib, H. Huang, and M. Lopez, “Upgrading the ALS beamline equipment protection system: software development and implementation”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 594-597.
- D. Teytelman, “Beam Loading Compensation for Super B-Factories”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAC002, pp. 154-158.
- A. Wolski and A. Sessler, “Linear and Nonlinear Coupling Using Decoupling Transformations”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH060, pp. 2059-2061.
- P. Lebrun and P. H. Garbincius, “Assessing Risk in Costing High-energy Accelerators: from Existing Projects to the Future Linear Collider”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE021, pp. 3392-3394.
- P. Micke et al., “An Optical Atomic Clock Based on a Highly Charged Ion”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR1WH01, unpublished.
- P. A. Schmelzbach et al., “1.8 MW Upgrade of the PSI Proton Facility”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEOBPA03, pp. 1879-1881.
- A. Sessler, E. Henestroza, and S. Yu, “Ion Motion in the Adiabatic Focuser”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH101, pp. 2149-2151.
Back to search