JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. W. Haberl and A. Taylor, “Operation of a 4 ma. Dynamitron as a Monoenergetic Neutron Source”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 152-156. 
[n]	Y. Jongen et al., “Status Report on the Catholic University of Louvain Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 110-114. 
[n]	K. Ammigan et al., “Experimental Results of Beryllium Exposed to Intense High Energy Proton Beam Pulses”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 102-105. doi:10.18429/JACoW-NAPAC2016-MOPOB14
[n]	M. Justus et al., “Upgrade of Timing System at HZDR ELBE Facility”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 931-934. doi:10.18429/JACoW-ICALEPCS2021-THPV031
[n]	R. K. Agrawal et al., “Implementation and Experience of Energy Ramping for Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA085, pp. 443-445. 
[n]	K. I. Tiedtke et al., “Challenges for Detection of Highly Intense FEL Radiation: Photon Beam Diagnostics at FLASH1 and FLASH2”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO81, pp. 417-420. 
[n]	K. Halbach, S. Marks, E. Hoyer, D. Humphries, B. Kincaid, and R. Schlueter, “Modeling and Measurement of the ALS U5 Undulator End Magnetic Structures”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1581-1584. 
[n]	P. Shrivastava, S. Krishnagopal, P. N. Prakash, and S. Som, “Progress of Recent SRF Activities in India”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp.. doi:10.18429/JACoW-SRF2021-THOTEV03
[n]	S. Saadat, M. Boland, and P. Kallakuri, “Multimethod signal processing for comprehensive tune coupling characterization at Canadian Light Source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM106, unpublished. 
[n]	F. Schmidt, E. Forest, and P. K. Skowronski, “Advances in MAD-X using PTC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN070, pp. 3381-3383. 
[n]	L. Ebeling, D. Reschke, L. Steder, and W. Hillert, “Commissioning of a Calibration Device for Second Sound Quench Detection”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 124. doi:10.18429/JACoW-SRF2021-SUPTEV006
[n]	R. Kuroda et al., “Present Status of Photo-cathode RF Gun System and its Applications at Waseda University”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT081, pp. 2685-2687. 
[n]	M. G. Hoffmann, M. Hoffmann, F. Ludwig, P. Morozov, and Ch. Schmidt, “Recent LLRF Measurements of the 3rd Harmonic System for FLASH”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA042, pp. 1422-1424. 
[n]	O. Napoli and B. Zotter, “Progress on the Final Focus System for CLIC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1408-1411. 
[n]	D. J. Wang, R. Chen, and C. K. Kuan and J, “EXPERIMENTAL STUDY OF THERMAL DEFORMATION OF THE MAGNET GIRDER AT SRRC STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP033, pp. XX-XX. 
[n]	M. Bieler, S. Choroba, R. Giebeler, S. Gold, J. Hameister, and H.-Ch. Lewin, “Commissioning of the Hard Tube Pulser Experiment at DESY”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1933-1936. 
[n]	P. Wang et al., “Beam Position Monitors for Duke FEL Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA93, pp. 2099-2101. 
[n]	C. H. Yu et al., “INTERACTION REGION DESIGN AND REALIZATION FOR BEPCII”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH09, pp. XX-XX. 
[n]	E. Forest and H. Nishimura, “Vertically Integraged Simulation Tools for Self-Consistent Tracking and Analysis”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1304-1307. 
[n]	D. Broemmelsiek and R. J. Pasquinelli, “Fermilab Recycler Stochastic Cooling Commissioning and Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB070, pp. 3431-3433. 
[n]	W. Li, “A New Tool for Beam-Life Research at HLS Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG057, pp. 2715-2717. 
[n]	M. S. Champion et al., “Progress on the Proton Power Upgrade Project at the Spallation Neutron Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 390-393. doi:10.18429/JACoW-LINAC2022-TUPOJO19
[n]	N. Nishimori, R. Hajima, H. Iijima, R. Nagai, and T. Nishitani, “Development of an Electron Gun for the ERL Light Source in Japan”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 10, pp. 11-14. 
[n]	Y. Sakai et al., “Initial status report on BNL ATF AE131 experiment harmonic nonlinear inverse Compton scattering”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1365-1368. doi:10.18429/JACoW-IPAC2024-TUPG53
[n]	J. M. Meyer et al., “Facing the Challenges of Experiment Control and Data Management at ESRF-EBS”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 66-70. doi:10.18429/JACoW-ICALEPCS2023-MO2AO01
[n]	T. Wilksen et al., “A New Timing System for PETRA IV”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 916-918. doi:10.18429/JACoW-ICALEPCS2021-THPV025
[n]	A. Compant La Fontaine, D. Guilhem, J.-L. Lemaire, and C. Quine, “Emission and Control of H+ Ions near an Electron-photon Conversion Target”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE096, pp. 1332-1334. 
[n]	D. Kr?ñmer, “A Multistage HGHG-Scheme for the BESSY Soft X-ray FEL Multiuser Facility”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS04, pp. XX-XX. 
[n]	A. S. Raja Rao, “Status of SRS INDUS-2”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A003, pp. 641-644. 
[n]	P. Cameron, I. Ben-Zvi, J. Kewisch, and V. Litvinenko, “A First Look at Beam Diagnostics for the RHIC Electron Cooling Project”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM004, pp. XX-XX. 
[n]	V. N. Litvinenko, S. H. Park, Y. Wu, and I. V. Pinayev, “The Duke XUV FEL Storage Ring Facility”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D066, pp. 834-836. 
[n]	H. Schlarb et al., “Experimental Layout of 30 nm High Harmonic Laser Seeding at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC028, pp. 127-129. 
[n]	J. Watson et al., “Design of the SSC Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 572-575. 
[n]	J. Norem et al., “Bunch Shortening Experiments in the Fermilab Booster and the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W024, pp. 396-398. 
[n]	L. T. Sun et al., “All Permanent Magnet ECR Ion Source Development and Operation Status at IMP”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper FRXA02, pp. 185-189. 
[n]	P. P. Goryl et al., “Tango Controls RFCs”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 317-321. doi:10.18429/JACoW-ICALEPCS2021-TUBL03
[n]	C. Leon, A. Scheinker, N. Yampolsky, and P. Anisimov, “Utilizing neural networks to speed up coherent synchrotron radiation computations”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 901-904. doi:10.18429/JACoW-IPAC2024-MOPS73
[n]	S. M. Wei et al., “Beam Extraction System for CYCIAE-14”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP026, pp. 105-107. 
[n]	V. I. Moiseev and V. Korchuganov, “Em Fields in a Metal in an External Magnetic Field at Low Temperatures”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 340-342. doi:10.18429/JACoW-RUPAC2018-WEPSB28
[n]	J. J. Yang et al., “Space Charge Simulation on High Intensity Cyclotrons: Code Development and Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU3PBC05, pp. 730-732. 
[n]	D. T. Abell et al., “Thermal Modeling and Benchmarking of Crystalline Laser Amplifiers”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2921-2924. doi:10.18429/JACoW-IPAC2022-THPOTK062
[n]	J. Kewisch, I. Ben-Zvi, and X. Y. Chang, “Electron Beam Generation and Transport for the RHIC Electron Cooler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE043, pp. 2774-2776. 
[n]	K. Hiramoto and M. Nishi, “A Particle Tracking Method for Accelerators with Small Radius of Curvature”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 717-720. 
[n]	Y. Morita et al., “Correcting asymmetry of closed-orbit distortion in J-PARC main ring by reducing current ripples of main magnet power supplies”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 931-934. doi:10.18429/JACoW-IPAC2024-TUAD2
[n]	K. Takayama et al., “A POP Experiment Scenario of Induction Synchrotron at the KEK 12GeV-PS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB093, pp. 1807-1809. 
[n]	A. Mazzolari et al., “Fabrication of Silicon Strip Crystals for UA9 Experiment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC080, pp. 4243-4245. 
[n]	F.-T. Chung et al., “Development of a Fast Signal-Gating Circuit for Observation of Fast Glitch of Photon Beam Intensity at NSRRC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP004, pp. 3956-3958. 
[n]	E. Peschardt and M. Studer, “Stochastic Cooling in the CERN ISR during ppbar Colliding Beam Physics”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2584-2587. 
[n]	E. Haebel, “Beam Tube Couplers for the Superconducting LEP Cavity”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-19, pp. XX-XX. 
[n]	M. Teichmann, B. C. Heisen, K. Weger, and J. Wiggins, “Karabo-GUI: A Multi-Purpose Graphical Front-End for the Karabo Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1063-1065. doi:10.18429/JACoW-ICALEPCS2015-WEPGF153
[n]	H. Ao, D. Luo, F. Marti, K. Saito, and S. Shanab, “Polarity Check of the FRIB Cryomodule Solenoids by Measuring Leakage Magnetic Field”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 821-823. doi:10.18429/JACoW-LINAC2016-THPRC024
[n]	A. Sharma, A. D. Ghodke, A. Rahim, and G. Singh, “Design of the Transfer Line-2 for the CTF-3 at CERN”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUC2MA02, pp. 71-73. 
[n]	G. Muelhaupt, “Status of the ESRF”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 65-70. 
[n]	T. H. Nicol et al., “SSR1 Cryomodule Design for PXIE”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA09, pp. 1373-1375. 
[n]	M. Boccioli and U. Frankenfeld, “Very High Voltage Control for ALICE TPC”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_106. 
[n]	S. I. Kurokawa, “B-Factory Commissioning and First Result”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOAL002, pp. 6-10. 
[n]	G. V. Eremeev et al., “4 K SRF Operation of the 10 MeV CEBAF Photo-Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 155-157. doi:10.18429/JACoW-LINAC2016-MOPLR010
[n]	A. Coraluppi, G. Coudert, H. Muller, and F. V?Âlker, “Power Converters of the Main Dipole and Quadrupole Magnet Strings of the Antiproton Decelerator at CERN”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A16, pp. 2220-2224. 
[n]	A. Savalle and O. Kamalou, “History and Prospectives of GANIL”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper TUAO01, pp. 115-117. doi:10.18429/JACoW-CYCLOTRONS2022-TUAO01
[n]	A. V. Fedotov et al., “IBS Suppression Lattice in RHIC: Theory and Experimental Verification”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA28, pp. 148-152. 
[n]	K. Takayama, T. Adachi, W. Jiang, Y. Oguri, and H. Tsutsui, “Induction Sector Cyclotron for Cluster Ions”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper TUA2CCO02, pp. 314-316. 
[n]	J. Norem, A. Hassanein, and I. Konkashbaev, “Mechanisms Limiting High Gradient RF Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB002, pp. 1180-1182. 
[n]	K. J. Gofron et al., “Deployment of ADTimePix3 areaDetector Driver at Neutron and X-ray User Facilities”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 90-94. doi:10.18429/JACoW-ICALEPCS2023-MO2AO05
[n]	F. Chambers et al., “Diagnostics and Data Analysis for the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3085-3088. 
[n]	I. N. Meshkov, A. O. Sidorin, A. V. Smirnov, and E. M. Syresin, “The Particle Dynamics in the Low Energy Storage Rings with Longitudinal Magnetic Field”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP05J, pp. 1067-1069. 
[n]	L. D. Hansborough, J. D. Sherman, and H. V. Smith, “An Injector and LEBT for the AAA Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH009, pp. 2096-2098. 
[n]	G. Vashchenko et al., “Recent Electron Beam Optimization at PITZ”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP007, pp. 689-691. 
[n]	S. Posen, M. Merio, A. Romanenko, and Y. Trenikhina, “Fermilab Nb3Sn R&D Program”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB048, pp. 678-680. 
[n]	Z. Zhu and A. Edelen, “Machine learning for the LCLS-II injector online modeling and optimization”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPG86, unpublished. 
[n]	O. Mouton and D. Guilhem, “Thin Foil Physical Effects on the Transport of an Intense Relativistic Electron Beam”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE097, pp. 1374-1376. 
[n]	T. Aoki et al., “Generation and Application of High Quality Photoelectron Beam at  Waseda University”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B15, pp. 1654-1656. 
[n]	P. Pizzol et al., “CVD Deposition of Nb Based Materials for SRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2241-2244. doi:10.18429/JACoW-IPAC2016-WEPMB056
[n]	E. N. Lomakin, Yu. S. Khodyrev, I. V. Krouptchenkov, V. S. Seleznev, M. Yu. Vrazhnov, and K. Wittenburg, “STUDY OF SR-MONITOR HEATING FROM E+E-- BEAMS AT DESY”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP12, pp. XX-XX. 
[n]	P. G. O'Shea et al., “Accelerator Archeology - The Resurrection of the Stanford MARKIII Electron Linac at Duke”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA17, pp. 1090-1092. 
[n]	L. L. Goldin, N. E. Ivanov, B. I. Kruglov, V. I. Nikolaev, K. K. Onosovsky, and Ju. B. Zudinov, “Vacuum Chamber for Proton-Heavy Ion Synchrotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 876-878. 
[n]	P. Mallon, D. Arbelaez, K. Hanzel, M. Kota, K. McCombs, and K. Ray, “Mechanical analysis and design for the LCLS-II-HE soft X-Ray undulator reconfiguration”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 142-145. doi:10.18429/JACoW-IPAC2024-MOPC37
[n]	R. K. Agrawal et al., “Synchronous Ramping Scheme for SRS INDUS-2”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_017. 
[n]	L. Sito et al., “Impedance and thermal studies of the CERN SPS wire scanners and mitigation of wire heating”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2260-2263. doi:10.18429/JACoW-IPAC2024-WEPG29
[n]	D. E. Kim et al., “Magnet Systems for Korea 4GSR Light Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2781-2783. doi:10.18429/JACoW-IPAC2022-THPOTK007
[n]	D. Bloess, “Chemistry and Surface Treatment”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-23, pp. XX-XX. 
[n]	F. H. de S?í, “Collective Instability Studies for Sirius”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 61-64. doi:10.18429/JACoW-IPAC2019-MOPGW003
[n]	W. Long, X. Li, S. H. Liu, and Y. Liu, “Development of a Single Cavity Regulation Based on microTCA.4 for SAPS-TP”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 286-289. doi:10.18429/JACoW-ICALEPCS2021-TUAL02
[n]	R. J. Roussel et al., “Transformer Ratio Measurements from Ramped Beams in the Plasma Blowout Regime using Emittance Exchange”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3778-3781. doi:10.18429/JACoW-IPAC2019-THPGW088
[n]	K. J. Kleman, “A New 50 MHz RF Cavity for Aladdin”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 924-927. 
[n]	J. E. Spencer, “Some Uses of REPMM's in Storage Rings and Colliders”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3666-3669. 
[n]	S. O. Schriber, “Pi-Mode Structures -- Results and Implications for Operation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH143, pp. 1113-1115. 
[n]	R. M. Ronningen, T. Baumann, and M. A. Kostin, “Materials under Irradiation by Heavy Ions and Perspectives for FRIB”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C03, pp. 662-666. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search