JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	N. Yamamoto, A. Gamelin, P. Marchand, R. Nagaoka, and T. Yamaguchi, “Stability survey of a double RF system with RF feedback loops for bunch lengthening in a low-emittance synchrotron ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3498-3501. doi:10.18429/JACoW-IPAC2023-WEPL161
[n]	H. Hoteit et al., “Advancements in magnet power supply systems at KARA: enhancing stability, efficiency, and operational capabilities”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB002, unpublished. 
[n]	O. A. Shevchenko et al., “Electronic Modulation of the FEL-Oscillator Radiation Power Driven by ERL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 98-101. doi:10.18429/JACoW-FEL2019-TUP024
[n]	C. Peschke, R. M. Böhm, C. Dimopoulou, S. Wunderlich, and C. Zhang, “Beam Measurements of a Palmer Pick-up for the Collector Ring of FAIR”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 95-97. doi:10.18429/JACoW-COOL2023-THPOSRP20
[n]	T. Y. Lee, B. Y. Chen, T. W. Hsu, B. Y. Huang, C. H. Kuo, and W. Y. Lin, “A Remote-Controlled Robot-Car in the TPS Tunnel”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3435-3438. doi:10.18429/JACoW-IPAC2019-THYYPLS3
[n]	Y. F. Xu, Z. G. He, Q. K. Jia, and W. W. Li, “The Generation of Highly Intense THz Radiation based on Smith-Purcell Radiation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1654-1656. doi:10.18429/JACoW-IPAC2015-TUPJE017
[n]	J. Burke and M. Procter, “An objective approach to determining the steel penetration capabilities of X-ray cargo inspection systems”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5124-5126. doi:10.18429/JACoW-IPAC2023-THPM109
[n]	M. A. Allen, J. M. Paterson, J. R. Rees, and P. B. Wilson, “Beam Energy Loss to Parasitic Modes in SPEAR II”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1838-1843. 
[n]	E. P. Colton, “H- Injection into the Low Energy Booster of the SSC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 423-426. 
[n]	P. D. Hermes et al., “Studies on Heavy Ion Losses from Collimation Cleaning at the LHC”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB43, pp. 138-142. 
[n]	W. C. Barkley, C. E. Buechler, and E. N. Pulliam, “Assessing the Continued Suitability of an Existing Water System for an Accelerator Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3673-3676. doi:10.18429/JACoW-IPAC2018-THPAL023
[n]	C. Chu and T. A. Pelaia, “Beam Trajectory Correction for SNS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT015, pp. 1425-1427. 
[n]	D. Li et al., “RF Tests of an 805 MHz Pillbox Cavity at Lab G of Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB025, pp. 1246-1248. 
[n]	Y. A. Svistunov and M. F. Vorogushin, “Design and Construction of CDTC Accelerating System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI104, pp. 2810-2812. 
[n]	J. R. Rees, “The PEP Storage Ring-Current Status”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 1989-1994. 
[n]	M. Castellano, A. Cianchi, V. Verzilov, L. Catani, and G. Orlandi, “Time Resolved Energy Measurement of the TESLA Test Facility Beam through the Analysis of Optical Transition Radiation Angular Distribution”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA144, pp. 2196-2198. 
[n]	R. T. Lee, J. S. Fraser, and C. D. P. Levy, “Laser Stripping of the TRIUMF H- Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 414-417. 
[n]	E. Henestroza, S. Yu, S. Eylon, and B. Carlsten, “High Voltage, High Current, Long Pulse Electron Beam Injector for DARHT”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W006, pp. 2832-2834. 
[n]	K. McGee et al., “First high-Q treatments for FCC 800 MHz 5-cell elliptical cavities”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPS25, unpublished. 
[n]	K. Bongardt et al., “Theoretical Studies of the Ultra Slow Extraction for the Cooler Synchrotron COSY-Juelich”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1767-1770. 
[n]	G. T. Danby and J. W. Jackson, “Description of New Vacumn Chamber Correction Concept”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 384-387. 
[n]	J.-P. Thiry, A. Balling, A. Dieckmann, F. Frommberger, and W. Hillert, “The New Orbit Correction System at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME006, pp. 479-481. 
[n]	M. Valette et al., “Impact of Superconducting Magnet Protection Equipment on the Circulating Beam in HL-LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3115-3118. doi:10.18429/JACoW-IPAC2018-THPAF062
[n]	S. V. Kuzikov, S. Yu. Kazakov, M. E. Plotkin, and J. L. Hirshfield, “HIGH-GRADIENT TWO-BEAM ACCELERATING STRUCTURE”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAPH08, pp. XX-XX. 
[n]	O. Azuma, H. Mizuno, and S. Tokumoto, “High Power Operation Results of the X-Band SLED System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1202-1205. 
[n]	S. V. Kuzikov and M. E. Plotkin, “Multi-Mode Accelerating Structure with High Filling Factor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP068, pp. 2952-2954. 
[n]	M. Isaila and K. Prelec, “Heavy Ion Source with Pulsed Magnetic Field”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 85-87. 
[n]	S. White, L. Carver, L. Farvacque, and S. Liuzzo, “Status and recent developments of python Accelerator Toolbox”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3185-3188. doi:10.18429/JACoW-IPAC2023-WEPL031
[n]	J. R. Smith, W. Namkung, M. J. Rhee, and R. F. Schneider, “Emittance Analysis of Beam Propagation in Low Pressure Air”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1997-2000. 
[n]	P. J. Chou, B. Fellenz, and G. Jackson, “A Transverse Tune Monitor for the Fermilab Main Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ13, pp. 2479-2481. 
[n]	R. Ferdinand et al., “Development of a Permanent Magnet ECR Source to Produce a 5 mA Deuteron Beam at CEA/Saclay”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP73, pp. 192-194. 
[n]	V. Hardion et al., “Maturity of the MAX IV Laboratory in Operation and Phase II Development”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 1-8. doi:10.18429/JACoW-ICALEPCS2021-MOAL01
[n]	J. S. Berg et al., “Accelerating Stages for a Muon Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP86, pp. 3152-3154. 
[n]	J. K. Boyd, “Analytic Electrostatic Solution of an Axisymmetric Accelerator Gap”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC13, pp. 2339-2341. 
[n]	J. K. Boyd, “Computer Assisted Accelerator Tuning”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 463-466. 
[n]	D. Reistad, “Status of the CELSIUS Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 128-131. 
[n]	V. B. Kutner et al., “Operation and Recent Development of ECR Ion Sources at the FLNR (JINR) Cyclotrons”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-03, pp. 405-408. 
[n]	L. Carver et al., “Beam loading simulations in PyAT for the ESRF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3181-3184. doi:10.18429/JACoW-IPAC2023-WEPL030
[n]	Z. M. Dai and N, “STUDY OF ORBIT STABILITY IN THE SSRF STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP013, pp. XX-XX. 
[n]	C. Cyterski and E. P. Chin, “Master Beam Control Relocation and Upgrade at the SLAC National Accelerator Laboratory”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA039, pp. XX-XX. 
[n]	J. T. Seeman et al., “PEP-N: A 0.8 GeV X 3.1 GeV Collider at SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH138, pp. 3564-3566. 
[n]	J. Guo et al., “Design of the Electron Ion Collider Electron Storage Ring SRF Cavity”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1307-1310. doi:10.18429/JACoW-IPAC2022-TUPOTK040
[n]	M. J. Rhee and B. N. Ding, “Beam Loading in a High Current Accelerating Gap”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2999-3002. 
[n]	Ch. Steinbach and M. van Rooij, “A Scanning Wire Beam Profile Monitor”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1920-1923. 
[n]	H. V. Smith, L. M. Young, J. D. Schneider, L. J. Rybarcyk, and M. Schulze, “High Power Operations of LEDA”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TU201, pp. 336-340. 
[n]	W. R. Smythe, “The R-F System for the University of Colorado 52-Inch Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C06, pp. 167-170. 
[n]	C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 157-159. doi:10.18429/JACoW-ICALEPCS2015-MOPGF029
[n]	I. V. Pogorelsky and I. Ben-Zvi, “Emerging Terawatt Picosecond CO$_2$ Laser Technology and Possible Applications in Accelerator Physics”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V040, pp. 645-647. 
[n]	R. L. Kustom and S. O. Brauer, “Higher-Order Modes in the APS Storage Ring Waveguides”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1217-1220. 
[n]	S. Lee, Y.-S. Cho, H. S. Kim, and H.-J. Kwon, “Implementation and Preliminary Test of Electron Beam Ion Sources at KOMAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1311-1313. doi:10.18429/JACoW-IPAC2016-TUPMR031

For LaTeX

Use Complete Form

For BibTeX

References

Back to search