Favourites
For Word
[n] N. I. Balalykin and A. B. Kuznetsov, “Opportunity of Development of Niobium Coated Copper Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03K, pp. 1837-1839.
[n] B. Bojovic and A. Susini, “Concept of the Detuned Primary Coupling and Model Measurements for the Radiofrequency System of the VINCY Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-36, pp. 282-285.
[n] M. Mayer, G. Howard, H. Kuhn, G. H. Schroeder, and G. Wilkinson, “Metallized Ceramic Vacuum Chambers for the LEP Injection Kicker Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1378-1381.
[n] S. Krylov et al., “Compact Installation for Radiation Processing of Materials by Accelerated Electrons”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP140, pp. 2567-2569.
[n] T. Xue, G. H. Gong, H. Li, and J. M. Li, “Design of EPICS IOC Based on RAIN1000Z1 ZYNQ Module”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 905-906. doi:10.18429/JACoW-ICALEPCS2015-WEPGF090
[n] S. Vrcic, “Design Patterns for the SKA Control System”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 343-347. doi:10.18429/JACoW-ICALEPCS2021-TUBR02
[n] M. Cargnelutti, R. Hrovatin, and G. Jug, “Beam Position Electronics Based on System on Chip Platform”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC04, pp. 1145-1147.
[n] R. Perin, “Review of R & D Towards High-field Accelerator Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 289-294.
[n] J. Jarvis et al., “The Optical Stochastic Cooling Program at Fermilab”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA039, unpublished.
[n] K. Thomsen, “Visual Monitor for Near-Target Beam Diagnostics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP015, pp. 3982-3983.
[n] G. Besnier, “Normal Oscillating Modes of a One-Dimensional Maxwellian Beam in the Linear Space Charge Approximation”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 882-885.
[n] P. Schoessow, W. Gai, C.-J. Jing, A. Kanareykin, J. G. Power, and O. V. Sinitsyn, “Multipactor in Dielectric Loaded Accelerating Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP010, pp. 827-829.
[n] L. Pivetta, A. DeMarco, S. Riggi, L. Van den Heever, and S. Vrcic, “The SKA Telescope Control System Guidelines and Architecture”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 34-38. doi:10.18429/JACoW-ICALEPCS2017-MOBPL03
[n] I. V. Syrachev, “The Progress of X-Ban Open" Cavity RF Pulse Compression Systems"”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 375-380.
[n] R. Pardo, L. M. Bollinger, and W. Henning, “Longitudinal Beam Optimization of the Argonne Superconducting Heavy-Ion Linear Accelerator”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H05, pp. 270-273.
[n] G. Kube et al., “A MTCA Based BPM-System for PETRA IV”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 19-23. doi:10.18429/JACoW-IBIC2023-MO3C04
[n] S. Vrcic and T. Juerges, “Development of the SKA Control System, Progress, and Challenges”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1221-1226. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO14
[n] J. E. Richards, R. B. Nussbaumer, S. Rapaz, and G. Waters, “ISAC EPICS on Linux: The March of the Penguins”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS004, pp. 778-781.
[n] K. Primdahl and R. Kustom, “Cooling the APS Storage Ring Radio-Frequency Accelerating Cavities Thermal/Stress/Fatigue Analysis and Cavity Cooling Configuration”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPP14, pp. 1690-1692.
[n] S. Watanabe, K. Aoki, T. Katayama, K. Ohnishi, and J. Yoshizawa, “The New Control System for TARN-2”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 93-95. doi:10.18429/JACoW-ICALEPCS1991-S02SRU10
[n] W. A. Barth, A. S. Fomichev, L. V. Grigorenko, T. Kulevoy, S. M. Polozov, and S. Yaramyshev, “Charge Stripping at High Energy Heavy Ion Linacs”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3452-3455. doi:10.18429/JACoW-IPAC2019-THPMP005
[n] I. Colizzi et al., “Upgrade of a Clinical Facility to Achieve a High Transmission and Gantry Angle-Independent Flash Tune”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEBO05, pp. 191-195. doi:10.18429/JACoW-CYCLOTRONS2022-WEBO05
[n] A. Meseck et al., “Triple Period Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1728-1731. doi:10.18429/JACoW-IPAC2019-TUPRB022
[n] M. L. Lopes et al., “Magnetic Design Constraints of Helical Solenoids”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2731-2733. doi:10.18429/JACoW-IPAC2014-WEPRI100
[n] C. W. Roberson, P. Sprangle, and C. M. Tang, “Collective Ion Acceleration with an Intense REB in a Periodic Waveguide”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4229-4231.
[n] R. Kustom, D. Horan, K. Primdahl, and M. Ferguson, “A 2-Megawatt Load for Testing High Voltage DC Power Supplies”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1294-1297.
[n] M. Jaski, “Eight-piece quadrupole magnet allows precise pole tip positioning”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR41, unpublished.
[n] M. H. Wang, C. C. Kuo, and C. S. Hsue, “Linear Beam Dynamics Effects of Three Dimensional Static Magnetic Fields of Insertion Devices at SRRC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P033, pp. 3533-3535.
For LaTeX
Use Complete Form
For BibTeX
References
- N. I. Balalykin and A. B. Kuznetsov, “Opportunity of Development of Niobium Coated Copper Cavity”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03K, pp. 1837-1839.
- B. Bojovic and A. Susini, “Concept of the Detuned Primary Coupling and Model Measurements for the Radiofrequency System of the VINCY Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-36, pp. 282-285.
- M. Mayer, G. Howard, H. Kuhn, G. H. Schroeder, and G. Wilkinson, “Metallized Ceramic Vacuum Chambers for the LEP Injection Kicker Magnets”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1378-1381.
- S. Krylov et al., “Compact Installation for Radiation Processing of Materials by Accelerated Electrons”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP140, pp. 2567-2569.
- T. Xue, G. H. Gong, H. Li, and J. M. Li, “Design of EPICS IOC Based on RAIN1000Z1 ZYNQ Module”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 905-906.
- S. Vrcic, “Design Patterns for the SKA Control System”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 343-347.
- M. Cargnelutti, R. Hrovatin, and G. Jug, “Beam Position Electronics Based on System on Chip Platform”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC04, pp. 1145-1147.
- R. Perin, “Review of R & D Towards High-field Accelerator Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 289-294.
- J. Jarvis et al., “The Optical Stochastic Cooling Program at Fermilab”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA039, unpublished.
- K. Thomsen, “Visual Monitor for Near-Target Beam Diagnostics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP015, pp. 3982-3983.
- G. Besnier, “Normal Oscillating Modes of a One-Dimensional Maxwellian Beam in the Linear Space Charge Approximation”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 882-885.
- P. Schoessow, W. Gai, C.-J. Jing, A. Kanareykin, J. G. Power, and O. V. Sinitsyn, “Multipactor in Dielectric Loaded Accelerating Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP010, pp. 827-829.
- L. Pivetta, A. DeMarco, S. Riggi, L. Van den Heever, and S. Vrcic, “The SKA Telescope Control System Guidelines and Architecture”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 34-38.
- I. V. Syrachev, “The Progress of X-Ban Open" Cavity RF Pulse Compression Systems"”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 375-380.
- R. Pardo, L. M. Bollinger, and W. Henning, “Longitudinal Beam Optimization of the Argonne Superconducting Heavy-Ion Linear Accelerator”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H05, pp. 270-273.
- G. Kube et al., “A MTCA Based BPM-System for PETRA IV”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MO3C04, pp. 19-23.
- S. Vrcic and T. Juerges, “Development of the SKA Control System, Progress, and Challenges”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO14, pp. 1221-1226.
- J. E. Richards, R. B. Nussbaumer, S. Rapaz, and G. Waters, “ISAC EPICS on Linux: The March of the Penguins”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS004, pp. 778-781.
- K. Primdahl and R. Kustom, “Cooling the APS Storage Ring Radio-Frequency Accelerating Cavities Thermal/Stress/Fatigue Analysis and Cavity Cooling Configuration”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPP14, pp. 1690-1692.
- S. Watanabe, K. Aoki, T. Katayama, K. Ohnishi, and J. Yoshizawa, “The New Control System for TARN-2”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S02SRU10, pp. 93-95.
- W. A. Barth, A. S. Fomichev, L. V. Grigorenko, T. Kulevoy, S. M. Polozov, and S. Yaramyshev, “Charge Stripping at High Energy Heavy Ion Linacs”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3452-3455.
- I. Colizzi et al., “Upgrade of a Clinical Facility to Achieve a High Transmission and Gantry Angle-Independent Flash Tune”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEBO05, pp. 191-195.
- A. Meseck et al., “Triple Period Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1728-1731.
- M. L. Lopes et al., “Magnetic Design Constraints of Helical Solenoids”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2731-2733.
- C. W. Roberson, P. Sprangle, and C. M. Tang, “Collective Ion Acceleration with an Intense REB in a Periodic Waveguide”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4229-4231.
- R. Kustom, D. Horan, K. Primdahl, and M. Ferguson, “A 2-Megawatt Load for Testing High Voltage DC Power Supplies”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1294-1297.
- M. Jaski, “Eight-piece quadrupole magnet allows precise pole tip positioning”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR41, unpublished.
- M. H. Wang, C. C. Kuo, and C. S. Hsue, “Linear Beam Dynamics Effects of Three Dimensional Static Magnetic Fields of Insertion Devices at SRRC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P033, pp. 3533-3535.
Back to search