Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Baskaran et al., “Recent Developments on ECR Ion Sources at the Medical Accelerator HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5A01, pp. 1607-1609.
[n] B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM055, unpublished.
[n] A. C. Mezger, D. Anicic, M. Gasche, T. Korhonen, and H. Lutz, “Upgrading the PROSCAN Control System to EPICS: A Success Story”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP032, pp. 733-735.
[n] P.-A. Duperrex, V. Gandel, D. C. Kiselev, Y. Lee, and U. M?â, “Current and Transmission Measurement Challenges for high Intensity Beams”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2A04, pp. 443-447.
[n] A. Marassi et al., “The SKA Dish Local Monitoring and Control System User Interface”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1880-1884. doi:10.18429/JACoW-ICALEPCS2017-THPHA188
[n] P. Forck, C. Dorn, M. H. Herty, V. Peplov, S. Sharamentov, and P. Strehl, “A Novel Device for Non-intersecting Bunch Shape Measurement at the High Current GSI-Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT030, pp. 2541-2543.
[n] A. Seryi et al., “Development of a Non-Magnetic Inertial Sensor for Vibration Stabilization in a Linear Collider”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP35, pp. 681-683.
[n] D. Dong, “2 Sigma Beam Signals for the Electro-gravitational Induction based on the Beam Instability in Charged Particle Storage Rings”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 141-142. doi:10.18429/JACoW-SAP2017-TUPH01
[n] Y. Cho, R. J. Holt, H. E. Jackson, T. K. Khoe, and G. S. Mavrogenes, “A Conceptual Design of a Linac-Stretcher Ring to Obtain a 2-GeV Continuous Electron Beam”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2119-2122.
[n] R. Tom?ís et al., “First Beta-Beating Measurement in the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP021, pp. 2531-2533.
[n] M. Eriksson et al., “MAX-IV Design: Pushing the Envelope”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZAAB02, pp. 74-76.
[n] R. P. Kujbida, A. V. Kryzhanovskij, and N. V. Lazarev, “On Proton Beam Emittance Growth in Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper D203, pp. 142-145.
[n] U. Mavric, J. Branlard, B. Chase, E. Cullerton, and D. W. Klepec, “A 96 Channel Receiver for the ILCTA LLRF System at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN102, pp. 2271-2273.
[n] B. M. Sabirov, “Recent Optimized Design of ILC Cryomodule With Explosion Welding Technology”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 141-143. doi:10.18429/JACoW-RUPAC2016-THCDMH02
[n] J. C. Amato, E. Blum, and R. Sundelin, “A Method of Correcting the SUPERFISH-Calculated Value of ZT2/Q for Cavities with Truncated Beam Tubes”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3630-3633.
[n] D.-K. Liu, I. Abe, A. Enomoto, K. Nakahara, J. Tanaka, and T. Urano, “Image Processing System for Electron Linac Beam Diagnosis”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-20, pp. 484-486.
[n] A. V. Elyutin et al., “Improved High Purity Niobium for Superconducting Accelerator Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E07, pp. XX-XX.
[n] A. Augustinus, P. Ch. Chochula, L. S. Jirden, and L. W. Wallet, “Standard Device Control via PVSS Object Libraries in ALICE”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA22, pp. 135-137.
[n] A. S. Boriskov, A. M. Opekunov, L. E. Polyakov, M. L. Smetanin, A. V. Telnov, and N. V. Zavyalov, “Development of a Program Code for Calculation of Charged Particle Dynamics in RFQ”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 256-258. doi:10.18429/JACoW-RuPAC2021-TUPSB12
[n] P. Giansiracusa et al., “Measurements of dark current and breakdown phenomena using Faraday cups at the Xband Laboratory for Accelerators and Beams (XLAB)”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS108, unpublished.
[n] R. E. Berg, P. Delphin, H. Kim, and M. Reiser, “Magnet and Extraction Studies for the University of Maryland Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 446-449.
[n] L. Teofili et al., “Design of the New Proton Synchrotron Booster Absorber Scraper (PSBAS) in the Framework of the Large Hadron Collider Injection Upgrade (LIU) Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3444-3447. doi:10.18429/JACoW-IPAC2018-THPAK091
[n] C. Grebogi and H. S. Uhm, “Ponderomotive Enhancement of Charged Particle Beam Limiting Current”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1093-1096.
[n] O. A. Gusev, V. M. Nikolaev, I. A. Prudnikov, V. I. Shakhov, and Yu. P. Vakhrushin, “The Unified Series Linear Electron Accelerators Development Results”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1845-1847.
[n] M. Kihara, “The Japan Linear Collider Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOZ03A, pp. 63-67.
[n] S. Okuda et al., “Generation of High-Intensity Two-Bunch Electron Beams with the L-Band Linac at ISIR for FELs and the other Applications”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-39, pp. 143-145.
[n] M. C. Lin and D. N. Smithe, “Study on Low-Frequency Oscillations in a Gyrotron Using a 3D CFDTD PIC Method”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP123, pp. 1713-1715.
[n] Y. Kawai, G. Alton, and Y. Liu, “The Effusive-Flow Properties of Target/Vapor-Transport Systems for Radioactive Ion Beam Applications”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE015, pp. 1422-1424.
[n] A. Zelinsky, P. Gladkikh, I. Karnaukhov, and Yu. Telegin, “The Electron Beam Dynamics Simulation in the Laser-Electron Storage Ring involving Compton and Intrabeam Scattering”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI108, pp. 787-789.
[n] M. Gyr and E. B. Vossenberg, “Half-Integer Fast Resonant Extraction with Quasi Rectangular Spill”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1501-1504.
[n] P. Saha et al., “High intensity beam operation of J-PARC RCS with minimum beam loss”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2331-2334. doi:10.18429/JACoW-IPAC2023-TUPM061
[n] J. Mi et al., “A Pulsed Modulator Power Supply for the g-2 Muon Storage Ring Injection Kicker”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP6, pp. 1488-1490.
[n] M. Awschalom, “Measurement of the Magnetic Median Surface of the Princeton-Pennsylvania Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 405-408.
[n] H. S. Uhm, R. C. Davidson, and I. D. Kaganovich, “Vlasov-Maxwell Description of Axisymmetric Two-Stream Instabilities in High-Intensity Particle Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH104, pp. 1912-1914.
[n] A. Hilaire, V. Mertens, and E. Weisse, “Beam Transfer to and Injection into LHC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07C, pp. 2117-2119.
[n] M. Awschalom, “The Radiation Shielding and Beam Dumps for the NAL 100-Ge V Proton Storage Rings”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 618-620.
[n] J. D. Jarvis, “Experimental Demonstration of Optical Stochastic Cooling: Single-Particle Feedback in the Optical Regime”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper TH2I3, unpublished.
[n] P. Strehl, G. Englert, M. Hartung, and H. Horneff, “A New Emittance Measuring Device of the Unilac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2216-2219.
[n] H. Li, N. Yang, and Z. Zhao, “Theoretical studies on polarization control of segmental undulator system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1250-1253. doi:10.18429/JACoW-IPAC2023-MOPM116
[n] R. Bourque and G. Laughon, “Thermal Analysis of a Refined APT Power Coupler and Thermal Shield and the Effect on the Cryoplant”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH131, pp. 1083-1085.
[n] D. Rapin, R. Hess, J. C. Nikl, and D. W. Werren, “Transfer Matrix Method for Computing Depolarization Effects of a Polarized Proton Beam in a Transport System”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 425-430.
[n] J. Chavanne, M. Hahn, R. Kersevan, C. A. Kitegi, C. Penel, and F. Revol, “Construction of a Cryogenic Permanent Magnet Undulator at ESRF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC105, pp. 2243-2245.
[n] G. Guignard and E. T. d, “Experimental Insertions made of Two Symmetric Triplets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP12A, pp. 894-896.
[n] C. C. A. de Villiers and B. Xaia, “Use of Tornado in KAT-?¡7 and MeerKAT Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 977-979. doi:10.18429/JACoW-ICALEPCS2015-WEPGF118
[n] A. K. Mitra et al., “Solid State Amplifiers for Linear Accelerators at TRIUMF”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO054, pp. 715-717.
[n] S. B. van der Geer and M. J. de Loos, “Applications of the General Particle Tracer Code”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P090, pp. 2577-2579.
[n] T. Sloan, O. Dermois, and M. Yurko, “Fabrication and Magnetic Field Measurements of the IUCF Cooler Ring Dipole Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1443-1446.
[n] E. D. Gazazian, M. I. Ivanian, and E. M. Laziev, “Photometry Method to Define the Charged Particle Longitudinal Distribution Function in the Bunch”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1711-1714.
[n] W. Bruns and S. Solyga, “Cavity Design for a Planar MM-Wave Sheet Beam Klystron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP039L, pp. 2140-2142.
[n] S. D. Williams et al., “Simulations of the Suitability of a DC Electron Photogun and S-Band Accelerating Structure as Input to an X-Band Linac”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2445-2448. doi:10.18429/JACoW-IPAC2022-THPOST006
[n] H. Yonehara et al., “Undulator and Wiggler of UVSOR”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3412-3415.
[n] H. Blosser, “Performance Estimate for a 200 MeV Sector Cyclotron”, in Proc. LINAC'61, Long Island, NY, USA, Apr. 1961, paper TALKS-17, pp. 105-109.
[n] P. S. Dester, L. Liu, and F. H. de S?â, “Energy Acceptance and on Momentum Aperture Optimization for the Sirius Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3041-3044. doi:10.18429/JACoW-IPAC2017-WEPIK052
[n] R. Amirikas and M. Kubczigk, “Introducing a Homepage for Information Retrieval and Backup of the Ground Vibration Measurements and Mechanical Vibrations of the Superconducting Modules at DESY”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN007, pp. 2059-2061.
[n] G. D. Toby, Y. W. Kang, S.-H. Kim, S. W. Lee, and J. S. Moss, “Multipacting Analysis of Warm Linac RF Vacuum Windows”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1044-1047. doi:10.18429/JACoW-IPAC2021-MOPAB336
[n] S. V. Ivanov, “Advances of Light-Ion Acceleration Program in the U70”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WECCH01, pp. 120-122.
[n] S. G. Tantawi and M. Yeddulla, “Design of Microwave Undulator Cavity”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP051, pp. 515-517.
[n] A. V. Ivanov et al., “The Electron Gun with Variable Beam Profile for Optimization of Electron Cooling”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI049, pp. 1356-1358.
[n] T. M. Nguyen, “Effect of Fabricate Condition on Properties of Bi-2212 Thin Films”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO070, pp. 905-907.
[n] J. P. Blewett et al., “Injection into the ISA”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 816-819.
[n] S. M. Polozov et al., “Commissioning and First Tests of the New Standing Wave 10 Mev Electron Accelerator”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 173-175. doi:10.18429/JACoW-RUPAC2016-TUCASH02
[n] M. E. Saleski and E. Carrone, “Configuration Management Plan for Interlock Safety Systems at the Linac Coherent Light Source (LCLS)”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP106, pp. XX-XX.
[n] A. R. D. Rodrigues, D. Wisnivesky, and C. E. T. Goncalves da Silva, “A Progress Report on the Laboratorio Nacional de Luz Sincrotron (Brazil)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1454-1457.
[n] V. I. Balbekov and P. N. Chirkov, “Coupling Resonance 2Qy-2Qx=0 Excited by Sextupolar Magnetic Fields”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 738-741.
[n] B. Bogdanovich, “RF-Field Generation in Wide Frequency Range by Electron Beam”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP48, pp. 178-180.
[n] A. Pisent et al., “Anthem project, construction of a RFQ driven BNCT neutron source”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 291-294. doi:10.18429/JACoW-LINAC2024-TUAA003
[n] I. S. Lehrman and G. Warrren, “Modeling of the End Regions of RFQ's Using the 3-D SOS Code”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO405, pp. 51-53.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Baskaran et al., “Recent Developments on ECR Ion Sources at the Medical Accelerator HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP5A01, pp. 1607-1609.
- B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM055, this conference.
- A. C. Mezger, D. Anicic, M. Gasche, T. Korhonen, and H. Lutz, “Upgrading the PROSCAN Control System to EPICS: A Success Story”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP032, pp. 733-735.
- P.-A. Duperrex, V. Gandel, D. C. Kiselev, Y. Lee, and U. M?â, “Current and Transmission Measurement Challenges for high Intensity Beams”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2A04, pp. 443-447.
- A. Marassi et al., “The SKA Dish Local Monitoring and Control System User Interface”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1880-1884.
- P. Forck, C. Dorn, M. H. Herty, V. Peplov, S. Sharamentov, and P. Strehl, “A Novel Device for Non-intersecting Bunch Shape Measurement at the High Current GSI-Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT030, pp. 2541-2543.
- A. Seryi et al., “Development of a Non-Magnetic Inertial Sensor for Vibration Stabilization in a Linear Collider”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP35, pp. 681-683.
- D. Dong, “2 Sigma Beam Signals for the Electro-gravitational Induction based on the Beam Instability in Charged Particle Storage Rings”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 141-142.
- Y. Cho, R. J. Holt, H. E. Jackson, T. K. Khoe, and G. S. Mavrogenes, “A Conceptual Design of a Linac-Stretcher Ring to Obtain a 2-GeV Continuous Electron Beam”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2119-2122.
- R. Tom?ís et al., “First Beta-Beating Measurement in the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP021, pp. 2531-2533.
- M. Eriksson et al., “MAX-IV Design: Pushing the Envelope”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOZAAB02, pp. 74-76.
- R. P. Kujbida, A. V. Kryzhanovskij, and N. V. Lazarev, “On Proton Beam Emittance Growth in Linac”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper D203, pp. 142-145.
- U. Mavric, J. Branlard, B. Chase, E. Cullerton, and D. W. Klepec, “A 96 Channel Receiver for the ILCTA LLRF System at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN102, pp. 2271-2273.
- B. M. Sabirov, “Recent Optimized Design of ILC Cryomodule With Explosion Welding Technology”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 141-143.
- J. C. Amato, E. Blum, and R. Sundelin, “A Method of Correcting the SUPERFISH-Calculated Value of ZT2/Q for Cavities with Truncated Beam Tubes”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3630-3633.
- D.-K. Liu, I. Abe, A. Enomoto, K. Nakahara, J. Tanaka, and T. Urano, “Image Processing System for Electron Linac Beam Diagnosis”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-20, pp. 484-486.
- A. V. Elyutin et al., “Improved High Purity Niobium for Superconducting Accelerator Cavities”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E07, pp. XX-XX.
- A. Augustinus, P. Ch. Chochula, L. S. Jirden, and L. W. Wallet, “Standard Device Control via PVSS Object Libraries in ALICE”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA22, pp. 135-137.
- A. S. Boriskov, A. M. Opekunov, L. E. Polyakov, M. L. Smetanin, A. V. Telnov, and N. V. Zavyalov, “Development of a Program Code for Calculation of Charged Particle Dynamics in RFQ”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 256-258.
- P. Giansiracusa et al., “Measurements of dark current and breakdown phenomena using Faraday cups at the Xband Laboratory for Accelerators and Beams (XLAB)”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS108, this conference.
- R. E. Berg, P. Delphin, H. Kim, and M. Reiser, “Magnet and Extraction Studies for the University of Maryland Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 446-449.
- L. Teofili et al., “Design of the New Proton Synchrotron Booster Absorber Scraper (PSBAS) in the Framework of the Large Hadron Collider Injection Upgrade (LIU) Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3444-3447.
- C. Grebogi and H. S. Uhm, “Ponderomotive Enhancement of Charged Particle Beam Limiting Current”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1093-1096.
- O. A. Gusev, V. M. Nikolaev, I. A. Prudnikov, V. I. Shakhov, and Yu. P. Vakhrushin, “The Unified Series Linear Electron Accelerators Development Results”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1845-1847.
- M. Kihara, “The Japan Linear Collider Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOZ03A, pp. 63-67.
- S. Okuda et al., “Generation of High-Intensity Two-Bunch Electron Beams with the L-Band Linac at ISIR for FELs and the other Applications”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-39, pp. 143-145.
- M. C. Lin and D. N. Smithe, “Study on Low-Frequency Oscillations in a Gyrotron Using a 3D CFDTD PIC Method”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP123, pp. 1713-1715.
- Y. Kawai, G. Alton, and Y. Liu, “The Effusive-Flow Properties of Target/Vapor-Transport Systems for Radioactive Ion Beam Applications”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE015, pp. 1422-1424.
- A. Zelinsky, P. Gladkikh, I. Karnaukhov, and Yu. Telegin, “The Electron Beam Dynamics Simulation in the Laser-Electron Storage Ring involving Compton and Intrabeam Scattering”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI108, pp. 787-789.
- M. Gyr and E. B. Vossenberg, “Half-Integer Fast Resonant Extraction with Quasi Rectangular Spill”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1501-1504.
- P. Saha et al., “High intensity beam operation of J-PARC RCS with minimum beam loss”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM061, pp. 2331-2334.
- J. Mi et al., “A Pulsed Modulator Power Supply for the g-2 Muon Storage Ring Injection Kicker”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP6, pp. 1488-1490.
- M. Awschalom, “Measurement of the Magnetic Median Surface of the Princeton-Pennsylvania Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 405-408.
- H. S. Uhm, R. C. Davidson, and I. D. Kaganovich, “Vlasov-Maxwell Description of Axisymmetric Two-Stream Instabilities in High-Intensity Particle Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH104, pp. 1912-1914.
- A. Hilaire, V. Mertens, and E. Weisse, “Beam Transfer to and Injection into LHC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07C, pp. 2117-2119.
- M. Awschalom, “The Radiation Shielding and Beam Dumps for the NAL 100-Ge V Proton Storage Rings”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 618-620.
- J. D. Jarvis, “Experimental Demonstration of Optical Stochastic Cooling: Single-Particle Feedback in the Optical Regime”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper TH2I3, unpublished.
- P. Strehl, G. Englert, M. Hartung, and H. Horneff, “A New Emittance Measuring Device of the Unilac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2216-2219.
- H. Li, N. Yang, and Z. Zhao, “Theoretical studies on polarization control of segmental undulator system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM116, pp. 1250-1253.
- R. Bourque and G. Laughon, “Thermal Analysis of a Refined APT Power Coupler and Thermal Shield and the Effect on the Cryoplant”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH131, pp. 1083-1085.
- D. Rapin, R. Hess, J. C. Nikl, and D. W. Werren, “Transfer Matrix Method for Computing Depolarization Effects of a Polarized Proton Beam in a Transport System”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 425-430.
- J. Chavanne, M. Hahn, R. Kersevan, C. A. Kitegi, C. Penel, and F. Revol, “Construction of a Cryogenic Permanent Magnet Undulator at ESRF”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC105, pp. 2243-2245.
- G. Guignard and E. T. d, “Experimental Insertions made of Two Symmetric Triplets”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP12A, pp. 894-896.
- C. C. A. de Villiers and B. Xaia, “Use of Tornado in KAT-?¡7 and MeerKAT Framework”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 977-979.
- A. K. Mitra et al., “Solid State Amplifiers for Linear Accelerators at TRIUMF”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO054, pp. 715-717.
- S. B. van der Geer and M. J. de Loos, “Applications of the General Particle Tracer Code”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P090, pp. 2577-2579.
- T. Sloan, O. Dermois, and M. Yurko, “Fabrication and Magnetic Field Measurements of the IUCF Cooler Ring Dipole Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1443-1446.
- E. D. Gazazian, M. I. Ivanian, and E. M. Laziev, “Photometry Method to Define the Charged Particle Longitudinal Distribution Function in the Bunch”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1711-1714.
- W. Bruns and S. Solyga, “Cavity Design for a Planar MM-Wave Sheet Beam Klystron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP039L, pp. 2140-2142.
- S. D. Williams et al., “Simulations of the Suitability of a DC Electron Photogun and S-Band Accelerating Structure as Input to an X-Band Linac”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2445-2448.
- H. Yonehara et al., “Undulator and Wiggler of UVSOR”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3412-3415.
- H. Blosser, “Performance Estimate for a 200 MeV Sector Cyclotron”, in Proc. 1961 Conf. on Linear Accelerators (LINAC'61), Long Island, NY, USA, Apr. 1961, paper TALKS-17, pp. 105-109.
- P. S. Dester, L. Liu, and F. H. de S?â, “Energy Acceptance and on Momentum Aperture Optimization for the Sirius Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3041-3044.
- R. Amirikas and M. Kubczigk, “Introducing a Homepage for Information Retrieval and Backup of the Ground Vibration Measurements and Mechanical Vibrations of the Superconducting Modules at DESY”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN007, pp. 2059-2061.
- G. D. Toby, Y. W. Kang, S.-H. Kim, S. W. Lee, and J. S. Moss, “Multipacting Analysis of Warm Linac RF Vacuum Windows”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1044-1047.
- S. V. Ivanov, “Advances of Light-Ion Acceleration Program in the U70”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WECCH01, pp. 120-122.
- S. G. Tantawi and M. Yeddulla, “Design of Microwave Undulator Cavity”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP051, pp. 515-517.
- A. V. Ivanov et al., “The Electron Gun with Variable Beam Profile for Optimization of Electron Cooling”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI049, pp. 1356-1358.
- T. M. Nguyen, “Effect of Fabricate Condition on Properties of Bi-2212 Thin Films”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO070, pp. 905-907.
- J. P. Blewett et al., “Injection into the ISA”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 816-819.
- S. M. Polozov et al., “Commissioning and First Tests of the New Standing Wave 10 Mev Electron Accelerator”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 173-175.
- M. E. Saleski and E. Carrone, “Configuration Management Plan for Interlock Safety Systems at the Linac Coherent Light Source (LCLS)”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP106, pp. XX-XX.
- A. R. D. Rodrigues, D. Wisnivesky, and C. E. T. Goncalves da Silva, “A Progress Report on the Laboratorio Nacional de Luz Sincrotron (Brazil)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1454-1457.
- V. I. Balbekov and P. N. Chirkov, “Coupling Resonance 2Qy-2Qx=0 Excited by Sextupolar Magnetic Fields”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 738-741.
- B. Bogdanovich, “RF-Field Generation in Wide Frequency Range by Electron Beam”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP48, pp. 178-180.
- A. Pisent et al., “Anthem project, construction of a RFQ driven BNCT neutron source”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 291-294.
- I. S. Lehrman and G. Warrren, “Modeling of the End Regions of RFQ's Using the 3-D SOS Code”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO405, pp. 51-53.
Back to search