Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. R. Bett, A. Boccardi, M. Krupa, and M. Wendt, “Simulation of the Signal Processing for the New Interaction Region BPMs of the High Luminosity LHC”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 120-123. doi:10.18429/JACoW-IBIC2020-WEPP12
[n] M. A. Brubaker, C. A. Ekdahl, and C. P. Yakymyshyn, “Electro-Optic Beam Position and Pulsed Power Monitors for the Second Axis of DARHT”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB007, pp. 534-538.
[n] L. Tavian, “Large Cryogenic Systems at 1.8 K”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUXF204, pp. 212-216.
[n] X. K. Maruyama, S. Penner, and P. Sprangle, “Analysis of Free Electron Laser Performance Utilizing the National Bureau of Standards' CW Microtron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 205-209.
[n] D. Reggiani, T. Reiss, M. Seidel, V. Talanov, and M. Wohlmuther, “Simulation of a Beam Rotation System for the SINQ Spallation Source at PSI”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO083, pp. 3954-3956.
[n] T. Ota et al., “Measurement of an L-Band Three-Cell Superconducting Cavity Fabricated in TOSHIBA”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D004, pp. 80-82.
[n] B. Hanna, H. Jostlein, D. Plant, and S. Pruss, “In-Situ Non-Destructive Testing of Superconducting Dipoles in the Tevatron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 524-527.
[n] W. Guo, S. L. Kramer, F. J. Willeke, X. Yang, and L. Yu, “A Lattice Correction Approach through Betatron Phase Advance”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 62-64. doi:10.18429/JACoW-IPAC2016-MOOCB02
[n] J. Sebek, A. Hill, J. Judkins, A. Krasnykh, S. Park, and H. Schwarz, “SPEAR 2 RF System Loads”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH072, pp. 939-941.
[n] A. Compant La Fontaine, D. Guilhem, J.-L. Lemaire, and C. Quine, “Emission and Control of H+ Ions near an Electron-photon Conversion Target”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE096, pp. 1332-1334.
[n] W. W. Destler, D. W. Hudgings, and M. J. Rhee, “Observation and Suppression of Radial Beam Blowup in the Maryland ERA”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1642-1645.
[n] H. Hindi et al., “A Formal Approach to the Design of Multibunch Feedback Systems: LQG Controllers”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1622-1625.
[n] D. R. Monnier-Bourdin, T. F. Debelle, and M. M. Ravindran, “Commercial-Off-The-Shelf Technologies for Picosecond Timing and Synchronization”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP064, pp. 525-527.
[n] T. Rinckel, D. V. Baxter, A. Bogdanov, V. P. Derenchuk, W. Reass, and P. E. Sokol, “LENS Proton Linac 6 Kilowatt Operation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP068, pp. 4932-4934.
[n] V. Aleynikov and A. Nikiforov, “QNX Based Software for Control System of FLNR”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_036.
[n] F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820.
[n] X. Li, W. Long, H. Sun, C. L. Zhang, and F. C. Zhao, “Overview of the CSNS/RCS LLRF Control System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME022, pp. 2977-2979.
[n] P. Chevtsov and V. Vrankovic, “Magnet Measurement System Upgrade at PSI”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO032, pp. 111-113.
[n] A. A. Mondelli and D. P. Chernin, “Plasma-Focused Cyclic Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3521-3524.
[n] M. Larrañaga, R. Enparantza, and D. C. Plostinar, “Initial 2D Investigations into the Design and Parameters of an EM Quadrupole for FETS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC040, pp. 2097-2099.
[n] C. Tang, “The Development of Accelerator Applications in China”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THM202, pp. XX-XX.
[n] B. P. Murin, B. B. Bondarev, and A. P. Durkin, “An Approach to Design of a Robust Focusing Channel”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-44, pp. 731-733.
[n] R. P. Fischer et al., “Generation of Tunable, Monochromatic X-rays in the Laser Synchrotron Source Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH081, pp. 2644-2646.
[n] Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
[n] Y. Gao et al., “Initial results of applying an autoencoder to detect anomalies in the air conditioning systems of the Brookhaven accelerator complex”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4448-4451. doi:10.18429/JACoW-IPAC2023-THPL013
[n] R. B. Turner and J. Ungrin, “Brazing Techniques and Alloys for Accelerator RF Components”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B15, pp. 77-79.
[n] M. Kawase, M. Kinsho, O. Takeda, Y. Yamazaki, and M. Yoshimoto, “Reconstructions of the Control System for the Charge Exchange System at the 3GeV RCS in J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA060, pp. 214-216.
[n] Ch. Markovits, S. Jaccard, and Ch. Perret, “The Proton Beam Facility OPTIS for the Therapy of Ocular Tumours”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-02, pp. 507-510.
[n] D. Calandroni and Y. Hiramoto, “A Simple Beam Chopper for TOF Experiments”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-24, pp. 317-319.
[n] N. Tani, H. Hotchi, J. Kamiya, M. Kinsho, O. Takeda, and M. Yamamoto, “Alignment Plan and Survey Results of the Equipment for J-PARC 3 GeV RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME020, pp. 2971-2973.
[n] B. K. Scheidt, “Dipole Light Monitor System for the ESRF Injector”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM002, pp. XX-XX.
[n] C. Z. Antoine and R. Crooks, “Reducing Electropolishing Time with Chemical-Mechanical Polishing”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO071, pp. 405-405.
[n] T. H. Van Hagan, D. W. Doll, J. D. Schneider, and F. R. Spinos, “Design of an Ogive-Shaped Beamstop”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4092, pp. 618-620.
[n] B. K. Scheidt, “Detection of Hard X-Rays in Air for Precise Monitoring of Vertical Position amp; Emittance in the ESRF Dipoles”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper CTWM01, pp. XX-XX.
[n] D. R. Brett et al., “Near Beam-gas Backgrounds for LHCb at 3.5 TeV”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ031, pp. 1876-1878.
[n] P. Anthouard et al., “AIRIX Prototype Technological Results at CESTA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P071, pp. 1254-1256.
[n] Y. Wu, J. van der Laan, R. Maas, R. Hart, F. Schimmel, and G. van Garderen, “Parametrization of the AmPS Magnets for the Control System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1901-1903.
[n] W. E. Fischer, “Application of Spallation Neutron Sources”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THYLA001, pp. 114-118.
For LaTeX
Use Complete Form
For BibTeX
References
- D. R. Bett, A. Boccardi, M. Krupa, and M. Wendt, “Simulation of the Signal Processing for the New Interaction Region BPMs of the High Luminosity LHC”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 120-123.
- M. A. Brubaker, C. A. Ekdahl, and C. P. Yakymyshyn, “Electro-Optic Beam Position and Pulsed Power Monitors for the Second Axis of DARHT”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB007, pp. 534-538.
- L. Tavian, “Large Cryogenic Systems at 1.8 K”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUXF204, pp. 212-216.
- X. K. Maruyama, S. Penner, and P. Sprangle, “Analysis of Free Electron Laser Performance Utilizing the National Bureau of Standards' CW Microtron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 205-209.
- D. Reggiani, T. Reiss, M. Seidel, V. Talanov, and M. Wohlmuther, “Simulation of a Beam Rotation System for the SINQ Spallation Source at PSI”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO083, pp. 3954-3956.
- T. Ota et al., “Measurement of an L-Band Three-Cell Superconducting Cavity Fabricated in TOSHIBA”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D004, pp. 80-82.
- B. Hanna, H. Jostlein, D. Plant, and S. Pruss, “In-Situ Non-Destructive Testing of Superconducting Dipoles in the Tevatron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 524-527.
- W. Guo, S. L. Kramer, F. J. Willeke, X. Yang, and L. Yu, “A Lattice Correction Approach through Betatron Phase Advance”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 62-64.
- J. Sebek, A. Hill, J. Judkins, A. Krasnykh, S. Park, and H. Schwarz, “SPEAR 2 RF System Loads”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH072, pp. 939-941.
- A. Compant La Fontaine, D. Guilhem, J.-L. Lemaire, and C. Quine, “Emission and Control of H+ Ions near an Electron-photon Conversion Target”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE096, pp. 1332-1334.
- W. W. Destler, D. W. Hudgings, and M. J. Rhee, “Observation and Suppression of Radial Beam Blowup in the Maryland ERA”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1642-1645.
- H. Hindi et al., “A Formal Approach to the Design of Multibunch Feedback Systems: LQG Controllers”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1622-1625.
- D. R. Monnier-Bourdin, T. F. Debelle, and M. M. Ravindran, “Commercial-Off-The-Shelf Technologies for Picosecond Timing and Synchronization”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP064, pp. 525-527.
- T. Rinckel, D. V. Baxter, A. Bogdanov, V. P. Derenchuk, W. Reass, and P. E. Sokol, “LENS Proton Linac 6 Kilowatt Operation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP068, pp. 4932-4934.
- V. Aleynikov and A. Nikiforov, “QNX Based Software for Control System of FLNR”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_036.
- F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820.
- X. Li, W. Long, H. Sun, C. L. Zhang, and F. C. Zhao, “Overview of the CSNS/RCS LLRF Control System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME022, pp. 2977-2979.
- P. Chevtsov and V. Vrankovic, “Magnet Measurement System Upgrade at PSI”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO032, pp. 111-113.
- A. A. Mondelli and D. P. Chernin, “Plasma-Focused Cyclic Accelerators”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3521-3524.
- M. Larrañaga, R. Enparantza, and D. C. Plostinar, “Initial 2D Investigations into the Design and Parameters of an EM Quadrupole for FETS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC040, pp. 2097-2099.
- C. Tang, “The Development of Accelerator Applications in China”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THM202, pp. XX-XX.
- B. P. Murin, B. B. Bondarev, and A. P. Durkin, “An Approach to Design of a Robust Focusing Channel”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-44, pp. 731-733.
- R. P. Fischer et al., “Generation of Tunable, Monochromatic X-rays in the Laser Synchrotron Source Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH081, pp. 2644-2646.
- Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
- Y. Gao et al., “Initial results of applying an autoencoder to detect anomalies in the air conditioning systems of the Brookhaven accelerator complex”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL013, pp. 4448-4451.
- R. B. Turner and J. Ungrin, “Brazing Techniques and Alloys for Accelerator RF Components”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B15, pp. 77-79.
- M. Kawase, M. Kinsho, O. Takeda, Y. Yamazaki, and M. Yoshimoto, “Reconstructions of the Control System for the Charge Exchange System at the 3GeV RCS in J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA060, pp. 214-216.
- Ch. Markovits, S. Jaccard, and Ch. Perret, “The Proton Beam Facility OPTIS for the Therapy of Ocular Tumours”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper H-02, pp. 507-510.
- D. Calandroni and Y. Hiramoto, “A Simple Beam Chopper for TOF Experiments”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-24, pp. 317-319.
- N. Tani, H. Hotchi, J. Kamiya, M. Kinsho, O. Takeda, and M. Yamamoto, “Alignment Plan and Survey Results of the Equipment for J-PARC 3 GeV RCS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME020, pp. 2971-2973.
- B. K. Scheidt, “Dipole Light Monitor System for the ESRF Injector”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM002, pp. XX-XX.
- C. Z. Antoine and R. Crooks, “Reducing Electropolishing Time with Chemical-Mechanical Polishing”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO071, pp. 405-405.
- T. H. Van Hagan, D. W. Doll, J. D. Schneider, and F. R. Spinos, “Design of an Ogive-Shaped Beamstop”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4092, pp. 618-620.
- B. K. Scheidt, “Detection of Hard X-Rays in Air for Precise Monitoring of Vertical Position amp; Emittance in the ESRF Dipoles”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper CTWM01, pp. XX-XX.
- D. R. Brett et al., “Near Beam-gas Backgrounds for LHCb at 3.5 TeV”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ031, pp. 1876-1878.
- P. Anthouard et al., “AIRIX Prototype Technological Results at CESTA”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P071, pp. 1254-1256.
- Y. Wu, J. van der Laan, R. Maas, R. Hart, F. Schimmel, and G. van Garderen, “Parametrization of the AmPS Magnets for the Control System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1901-1903.
- W. E. Fischer, “Application of Spallation Neutron Sources”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THYLA001, pp. 114-118.
Back to search