Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. A. Leitner et al., “H$^-$ Ion Source Development for the National Spallation Neutron Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W026, pp. 2758-2760.
[n] Y. Tang et al., “NSLS Control System Upgrade Status”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1852-1855.
[n] S. Lenci, H. Bohlen, A. Mizuhara, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE118, pp. 2326-2328.
[n] M. Akemoto and S. Takeda, “Development of an X-Band Klystron Modulator with a Pulse-Forming Line and Magnetic Switch”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-28, pp. 374-376.
[n] S. A. Gavrilov and A. Feschenko, “Bunch Shape Monitors for Modern Ion Linacs”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 176-178. doi:10.18429/JACoW-IBIC2017-TUPCC12
[n] J. Buon, J. Jeanjean, F. Le Diberdier, V. Lepeltier, and P. Puzo, “Results of the Orsay Spot Size Monitor for the Final Focus Test Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP059L, pp. 1683-1685.
[n] K. C. Harkay et al., “Generation of Short X-Ray Pulses Using Crab Cavities at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB009, pp. 668-670.
[n] N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2239-2242. doi:10.18429/JACoW-IPAC2018-WEPAL034
[n] W. C. Sellyey and C. G. Parazzoli, “Heating of the LSS Wiggler Beam Tube due to Induced Surface Current”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2769-2772.
[n] E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1215-1218.
[n] J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580.
[n] T. L. Houck, G. A. Westenskow, J. Haimson, and B. Mecklenburg, “Choppertron II”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ03, pp. 1524-1526.
[n] D. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Nonlinear Optimization in the C Beam Optics Code”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A08, pp. 1071-1073.
[n] M. J. Boland, Y. E. Tan, and D. Zhu, “Layout Options for the AXXS Injector and XFEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1394-1396. doi:10.18429/JACoW-IPAC2015-TUPWA002
[n] Y. Xiao, C. Feng, H. Sun, and B. Liu, “Feasibility verification of ultrafast FEL generation experimental scheme based on SXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1920-1923. doi:10.18429/JACoW-IPAC2023-TUPL078
[n] J. L. Muñoz et al., “Multiharmonic Buncher for the Isolde Superconducting Recoil Separator Project”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 321-325. doi:10.18429/JACoW-HB2023-WEC4C2
[n] D. Einfeld, S. Hermle, E. Huettel, R. Rossmanith, and R. Walther, “The Injection Scheme for the ANKA Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP17F, pp. 2135-2136.
[n] F. J. Mumford, P. G. Blaine, and H. N. Jungwirth, “Design of a Vacuum Chamber for the Magnets of a Separated Sector Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-13, pp. 1934-1937.
[n] R. J. Wood and M. P. Martinez, “The OPC-Based System at SNS: An EPICS Supplement”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB29, pp. 223-225.
[n] J. W. Hurd et al., “Commissioning Plans for SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-53, pp. 462-464.
[n] A. J. Clapp, L. Bobb, G. Cook, and P. Karataev, “One Dimensional Beam Position Monitor Prototype using Incoherent Cherenkov Diffraction Radiation”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 94-98. doi:10.18429/JACoW-IBIC2023-MOP032
[n] P. P. Goryl et al., “Tango Controls RFCs”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 317-321. doi:10.18429/JACoW-ICALEPCS2021-TUBL03
[n] V. N. Litvinenko and I. Ben-Zvi, “Potential Use of eRHIC's ERL for FELs and Light Sources”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper WEBOS04, pp. XX-XX.
[n] G. Brautti, I. Boscolo, R. Coisson, M. Leo, and A. Tepore, “Production and Dynamics of High Intensity Electron Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 286-289.
[n] C. D. Striffler et al., “Electron Ring Accelerator Research at the University of Maryland”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4234-4237.
[n] W. R. Rawnsley and R. E. Laxdal, “A Beam Current Monitor for the VECC Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF27, pp. 275-278.
[n] S. U. De Silva, J. R. Delayen, H. Park, P. Berrutti, and N. A. Huque, “Room Temperature Measurements of Higher Order Modes for the SPS Prototype RF-Dipole Crabbing Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3805-3807. doi:10.18429/JACoW-IPAC2018-THPAL067
[n] A. Hassanein et al., “The Design of a Liquid Lithium Lens for a Muon Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP48, pp. 3062-3064.
[n] R. Brogle, P. Muggli, P. Davis, G. Hairapetian, and C. Joshi, “Studies of Linear and Nonlinear Photoelectric Emission for Advanced Accelerator Applications”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC20, pp. 1039-1042.
[n] W. C. Sellyey and J. D. Gilpatrick, “A Compact Residual Gas Ionization Profile Monitor (RGIPM) System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA122, pp. 2152-2154.
[n] L. D. Hansborough et al., “Mechanical Engineering of a 75-keV Proton Injector for the Low Energy Demonstration Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W020, pp. 2740-2742.
[n] M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
[n] D. Shu et al., “Conceptual Design of the Cavity Mechanical System for Cavity-Based X-Ray Free Electron Laser”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 103. doi:10.18429/JACoW-MEDSI2020-TUOA02
[n] N. Gerasimova, H. Sinn, S. Dziarzhytski, and R. Treusch, “The Photon Beam Loss Monitors as a Part of Equipment Protection System at European XFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP010, pp. 37-40.
[n] C. Taylor et al., “Study on Switching from H- to H+ Beam Delivery to the Proton Radiography and Ultra Cold Neutron Facilities at the Los Alamos Neutron Science Center (LANSCE)”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPM050, unpublished.
[n] S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
[n] Z. Liang et al., “Superconducting β=0.19 half-wave cavity for CiADS”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1738-1740. doi:10.18429/JACoW-IPAC2025-WEPB009
[n] D. Mihalcea et al., “Field-Emission Electron Source Embedded in a Field-Enhanced Conduction-Cooled Superconducting RF Cavity”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 192-195. doi:10.18429/JACoW-NAPAC2019-MOPLH10
[n] R. E. Giacone et al., “Simulations of Electron Injection into Plasma Wake Fields by Colliding Laser Pulses Using XOOPIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH149, pp. 4023-4025.
[n] C. R. Ader, M. W. McGee, L. E. Nobrega, and E. A. Voirin, “Overview of Fabrication Techniques and Lessons Learned with Accelerator Vacuum Windows”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 51-54. doi:10.18429/JACoW-IPAC2018-MOZGBE4
[n] K. A. Young et al., “5 MW 805 MHz SNS RF System Experience”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT054, pp. 3280-3282.
[n] A. Balkcum et al., “Design and Operation of a High Power L-Band Multiple Beam Klystron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT031, pp. 2170-2172.
[n] G. Bellomo and F. Resmini, “A Method for Minimizing Trim Coil Power Requirements in Superconducting Cyclotrons”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-12, pp. 2095-2100.
[n] Y.-J. Chen et al., “Heavy Ion Fusion Injector Program”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 703-706.
[n] S. Lenci and E. Eisen, “Large Scale Production of 805-MHz Pulsed Klystrons for SNS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF076, pp. 1114-1116.
[n] A. P. Zhukov, S. Assadi, R. Dickson, V. Gaidash, and J. Pogge, “SNS BLM System Evolution: Detectors, Electronics, and Software”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP038, pp. 4853-4855.
[n] P. Horodek, I. N. Meshkov, A. G. Kobets, O. Orlov, and A. A. Sidorin, “Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB32, pp. 231-233.
[n] R. F. Welton et al., “The ORNL Helicon H- Ion Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP038, pp. 441-441.
[n] W. T. Weng and M. Diwan, “Neutrino Beam Facilities and Projects”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAD001, pp. 429-433.
[n] T. Hiatt et al., “Cryogenic Testing of the RF Input Waveguide for the CEBAF Upgrade Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH158, pp. 1155-1157.
[n] S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548.
[n] E. B. Blum and J. L. Rothman, “Self Triggered Single Pulse Beam Position Monitor”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2307-2310.
For LaTeX
Use Complete Form
For BibTeX
References
- M. A. Leitner et al., “H$^-$ Ion Source Development for the National Spallation Neutron Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W026, pp. 2758-2760.
- Y. Tang et al., “NSLS Control System Upgrade Status”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1852-1855.
- S. Lenci, H. Bohlen, A. Mizuhara, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE118, pp. 2326-2328.
- M. Akemoto and S. Takeda, “Development of an X-Band Klystron Modulator with a Pulse-Forming Line and Magnetic Switch”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-28, pp. 374-376.
- S. A. Gavrilov and A. Feschenko, “Bunch Shape Monitors for Modern Ion Linacs”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 176-178.
- J. Buon, J. Jeanjean, F. Le Diberdier, V. Lepeltier, and P. Puzo, “Results of the Orsay Spot Size Monitor for the Final Focus Test Beam”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP059L, pp. 1683-1685.
- K. C. Harkay et al., “Generation of Short X-Ray Pulses Using Crab Cavities at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAB009, pp. 668-670.
- N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2239-2242.
- W. C. Sellyey and C. G. Parazzoli, “Heating of the LSS Wiggler Beam Tube due to Induced Surface Current”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2769-2772.
- E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1215-1218.
- J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 576-580.
- T. L. Houck, G. A. Westenskow, J. Haimson, and B. Mecklenburg, “Choppertron II”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ03, pp. 1524-1526.
- D. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Nonlinear Optimization in the C Beam Optics Code”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6A08, pp. 1071-1073.
- M. J. Boland, Y. E. Tan, and D. Zhu, “Layout Options for the AXXS Injector and XFEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1394-1396.
- Y. Xiao, C. Feng, H. Sun, and B. Liu, “Feasibility verification of ultrafast FEL generation experimental scheme based on SXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL078, pp. 1920-1923.
- J. L. Muñoz et al., “Multiharmonic Buncher for the Isolde Superconducting Recoil Separator Project”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEC4C2, pp. 321-325.
- D. Einfeld, S. Hermle, E. Huettel, R. Rossmanith, and R. Walther, “The Injection Scheme for the ANKA Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP17F, pp. 2135-2136.
- F. J. Mumford, P. G. Blaine, and H. N. Jungwirth, “Design of a Vacuum Chamber for the Magnets of a Separated Sector Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-13, pp. 1934-1937.
- R. J. Wood and M. P. Martinez, “The OPC-Based System at SNS: An EPICS Supplement”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB29, pp. 223-225.
- J. W. Hurd et al., “Commissioning Plans for SSC Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-53, pp. 462-464.
- A. J. Clapp, L. Bobb, G. Cook, and P. Karataev, “One Dimensional Beam Position Monitor Prototype using Incoherent Cherenkov Diffraction Radiation”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP032, pp. 94-98.
- P. P. Goryl et al., “Tango Controls RFCs”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 317-321.
- V. N. Litvinenko and I. Ben-Zvi, “Potential Use of eRHIC's ERL for FELs and Light Sources”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper WEBOS04, pp. XX-XX.
- G. Brautti, I. Boscolo, R. Coisson, M. Leo, and A. Tepore, “Production and Dynamics of High Intensity Electron Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 286-289.
- C. D. Striffler et al., “Electron Ring Accelerator Research at the University of Maryland”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4234-4237.
- W. R. Rawnsley and R. E. Laxdal, “A Beam Current Monitor for the VECC Accelerator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF27, pp. 275-278.
- S. U. De Silva, J. R. Delayen, H. Park, P. Berrutti, and N. A. Huque, “Room Temperature Measurements of Higher Order Modes for the SPS Prototype RF-Dipole Crabbing Cavity”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3805-3807.
- A. Hassanein et al., “The Design of a Liquid Lithium Lens for a Muon Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP48, pp. 3062-3064.
- R. Brogle, P. Muggli, P. Davis, G. Hairapetian, and C. Joshi, “Studies of Linear and Nonlinear Photoelectric Emission for Advanced Accelerator Applications”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC20, pp. 1039-1042.
- W. C. Sellyey and J. D. Gilpatrick, “A Compact Residual Gas Ionization Profile Monitor (RGIPM) System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA122, pp. 2152-2154.
- L. D. Hansborough et al., “Mechanical Engineering of a 75-keV Proton Injector for the Low Energy Demonstration Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W020, pp. 2740-2742.
- M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
- D. Shu et al., “Conceptual Design of the Cavity Mechanical System for Cavity-Based X-Ray Free Electron Laser”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 103.
- N. Gerasimova, H. Sinn, S. Dziarzhytski, and R. Treusch, “The Photon Beam Loss Monitors as a Part of Equipment Protection System at European XFEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP010, pp. 37-40.
- C. Taylor et al., “Study on Switching from H- to H+ Beam Delivery to the Proton Radiography and Ultra Cold Neutron Facilities at the Los Alamos Neutron Science Center (LANSCE)”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM050, unpublished.
- S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
- Z. Liang et al., “Superconducting β=0.19 half-wave cavity for CiADS”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB009, pp. 1738-1740.
- D. Mihalcea et al., “Field-Emission Electron Source Embedded in a Field-Enhanced Conduction-Cooled Superconducting RF Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 192-195.
- R. E. Giacone et al., “Simulations of Electron Injection into Plasma Wake Fields by Colliding Laser Pulses Using XOOPIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH149, pp. 4023-4025.
- C. R. Ader, M. W. McGee, L. E. Nobrega, and E. A. Voirin, “Overview of Fabrication Techniques and Lessons Learned with Accelerator Vacuum Windows”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 51-54.
- K. A. Young et al., “5 MW 805 MHz SNS RF System Experience”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT054, pp. 3280-3282.
- A. Balkcum et al., “Design and Operation of a High Power L-Band Multiple Beam Klystron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT031, pp. 2170-2172.
- G. Bellomo and F. Resmini, “A Method for Minimizing Trim Coil Power Requirements in Superconducting Cyclotrons”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-12, pp. 2095-2100.
- Y.-J. Chen et al., “Heavy Ion Fusion Injector Program”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 703-706.
- S. Lenci and E. Eisen, “Large Scale Production of 805-MHz Pulsed Klystrons for SNS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF076, pp. 1114-1116.
- A. P. Zhukov, S. Assadi, R. Dickson, V. Gaidash, and J. Pogge, “SNS BLM System Evolution: Detectors, Electronics, and Software”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP038, pp. 4853-4855.
- P. Horodek, I. N. Meshkov, A. G. Kobets, O. Orlov, and A. A. Sidorin, “Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB32, pp. 231-233.
- R. F. Welton et al., “The ORNL Helicon H- Ion Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP038, pp. 441-441.
- W. T. Weng and M. Diwan, “Neutrino Beam Facilities and Projects”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAD001, pp. 429-433.
- T. Hiatt et al., “Cryogenic Testing of the RF Input Waveguide for the CEBAF Upgrade Cryomodule”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH158, pp. 1155-1157.
- S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548.
- E. B. Blum and J. L. Rothman, “Self Triggered Single Pulse Beam Position Monitor”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2307-2310.
Back to search