Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. D. Joo, I. Hwang, C. Kim, and B.-J. Lee, “Design of SLED System with Dual Side-wall Coupling Irises and Biplanar Power Splitter for PAL XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC059, pp. 3425-3427.
[n] L. Monaco et al., “Fabrication and Treatment of the ESS Medium Beta Prototype Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1003-1006. doi:10.18429/JACoW-IPAC2017-MOPVA060
[n] A. Asami et al., “Progress of Positron Generator at KEK”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-20, pp. 577-579.
[n] R. A. Early and J. K. Cobb, “TOSCA Calculations and Measurements for the SLAC SLC Damping Ring Dipole Manget”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3654-3657.
[n] F. Marhauser, R. Rodriguez, and Z. Li, “A Novel Design of a High Brightness Superconducting RF Photoinjector Gun Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD078, pp. 1581-1583.
[n] S. A. Blankenburg, J. K. Cobb, and J. J. Muray, “Secondary Emission from Thin Metal Foils Bombarded with 70 - MeV Electrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 935-943.
[n] M. Bertucci et al., “Test, Diagnostics and Computed Tomographic Inspection of a Large Grain 3.9 GHz Prototype Cavity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1011-1014. doi:10.18429/JACoW-IPAC2017-MOPVA062
[n] L. R. Lucas and D. R. Walz, “A Precision Actuator and Shaft Encoder for a High Radiation Environment and Other Beam Component Developments at SLAC”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 792-795.
[n] S. Ohsawa et al., “Progress of Electron Gun Systems for the e-/e+ Linac at KEK”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-50, pp. 434-436.
[n] R. A. Early, J. K. Cobb, and J. E. Oijala, “Design Calculations and Measurements of a Dipole Magnet with Permendur Pole Pieces”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 351-354.
[n] G. E. Fischer et al., “Precision Fiducialization of Transport Components”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 138-141.
[n] M. E. Herniter and W. D. Getty, “Development of High-Current-Density Lab 6 Thermionic Emitters for a Space-Charge-Limited Electron Gun”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 292-295.
[n] S. Pirani et al., “Investigation of HOM Frequency Shifts Induced by Mechanical Tolerances”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1071-1073. doi:10.18429/JACoW-IPAC2017-MOPVA091
[n] J. H. Han, I. Hwang, and H.-S. Kang, “Microbunching Instability Study for the PAL-XFEL Linac”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD42, pp. 125-128.
[n] G. Cheng, E. Daly, and M. Wiseman, “Pressure Safety of JLAB 12GeV Upgrade Cryomodule”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO055, pp. 718-722.
[n] Y. Nakamura, “STATUS REPORT ON JAERI-AVF CYCLOTRON SYSTEM”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P23, pp. XX-XX.
[n] Q. S. Shu et al., “SQUID-based Nondestructive Testing Instrument of Dished Niobium Sheets for SRF Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS055, pp. 2469-2471.
[n] R. Paparella et al., “INFN-LASA for the PIP-II Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 205-209. doi:10.18429/JACoW-SRF2019-MOP060
[n] D. R. Walz and L. R. Lucas, “The Sphere-Dump" - A New Low-Cost High-Power Beam Dump Concept and a Catalytic Hydrogen-Oxygen Recombiner for Radioactive Water Systems"”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 613-618.
[n] J. H. Hong, J. H. Han, C. Kim, and H. Yang, “Bunch Arrival Time Monitor Test at PAL-XFEL ITF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 223-225. doi:10.18429/JACoW-IPAC2016-MOPMB058
[n] G. Chen and B. R. An, “Towards a Time-Constrained Service-Oriented Architecture for Automation and Control in Large-Scale Dynamic Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 760-764. doi:10.18429/JACoW-ICALEPCS2017-TUPHA152
[n] J. K. Cobb and J. J. Muray, “Magnetic Field Measurement and Spectroscopy in Multipole Fields”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 395-401.
[n] R. A. Early and J. K. Cobb, “Calculations and Measurements for the SLAC SLC Positron Return Quadrupole Magnet”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1428-1431.
[n] M. Bertucci et al., “In-Depth Analysis of the Vertical Test Results of the Third-Harmonic Cavities for the E-XFEL Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2644-2647. doi:10.18429/JACoW-IPAC2018-WEPMK008
[n] A. A. Sulimov et al., “First RF Measurement Results for the European XFEL SC Cavity Production”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB012, pp. 195-197.
[n] C. Fischer et al., “Performance of the CERN ISR at 31.4 GeV”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3155-3158.
[n] M. Duncan, N. Eddy, R. Ainsworth, and Y.-K. Kim, “Instability threshold measurements in the IOTA ring at Fermilab”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP041, unpublished.
[n] R. Rodriguez, R. I. Cutler, J. Grippe, and J. Mynk, “Overview and Status of RF Systems for the SSC Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1250-1253.
[n] J. F. Chen, “Status of SRF Activities for SHINE”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper MOIXA01, unpublished.
[n] Y. D. Joo et al., “RF Accelerating Voltage of PLS-II Superconducting RF System for Stable Top-up Operation with Beam Current of 400 mA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3015-3017. doi:10.18429/JACoW-IPAC2015-WEPMN039
[n] S. K. Howry and A. R. Wilmunder, “A Microprocessor Controller for Phasing the Accelerator”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1804-1807.
[n] Y. Kim, J. Yu, S. Park, and S. Kang, “Design of the machine interlock system for Korea-4GSR”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1656-1658. doi:10.18429/JACoW-ICALEPCS2025-THPD035
[n] P. Tenenbaum et al., “Precision Measurement of Transoprt Components”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2838-2841.
[n] S. Park, J. Yu, S. Kang, and Y. Kim, “Design of the Korea-4GSR Timing system”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 678-680. doi:10.18429/JACoW-ICALEPCS2025-TUPD075
[n] M. Duncan, N. Eddy, R. Ainsworth, and Y.-K. Kim, “Instability threshold measurements in the IOTA ring at Fermilab”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 479-483. doi:10.18429/JACoW-NAPAC2025-TUP053
[n] H. Hanaki et al., “Construction of Injector System for SPring-8 X-FEL”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP014, pp. 425-427.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. D. Joo, I. Hwang, C. Kim, and B.-J. Lee, “Design of SLED System with Dual Side-wall Coupling Irises and Biplanar Power Splitter for PAL XFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC059, pp. 3425-3427.
- L. Monaco et al., “Fabrication and Treatment of the ESS Medium Beta Prototype Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1003-1006.
- A. Asami et al., “Progress of Positron Generator at KEK”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-20, pp. 577-579.
- R. A. Early and J. K. Cobb, “TOSCA Calculations and Measurements for the SLAC SLC Damping Ring Dipole Manget”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3654-3657.
- F. Marhauser, R. Rodriguez, and Z. Li, “A Novel Design of a High Brightness Superconducting RF Photoinjector Gun Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD078, pp. 1581-1583.
- S. A. Blankenburg, J. K. Cobb, and J. J. Muray, “Secondary Emission from Thin Metal Foils Bombarded with 70 - MeV Electrons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 935-943.
- M. Bertucci et al., “Test, Diagnostics and Computed Tomographic Inspection of a Large Grain 3.9 GHz Prototype Cavity”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1011-1014.
- L. R. Lucas and D. R. Walz, “A Precision Actuator and Shaft Encoder for a High Radiation Environment and Other Beam Component Developments at SLAC”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 792-795.
- S. Ohsawa et al., “Progress of Electron Gun Systems for the e-/e+ Linac at KEK”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-50, pp. 434-436.
- R. A. Early, J. K. Cobb, and J. E. Oijala, “Design Calculations and Measurements of a Dipole Magnet with Permendur Pole Pieces”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 351-354.
- G. E. Fischer et al., “Precision Fiducialization of Transport Components”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 138-141.
- M. E. Herniter and W. D. Getty, “Development of High-Current-Density Lab 6 Thermionic Emitters for a Space-Charge-Limited Electron Gun”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 292-295.
- S. Pirani et al., “Investigation of HOM Frequency Shifts Induced by Mechanical Tolerances”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1071-1073.
- J. H. Han, I. Hwang, and H.-S. Kang, “Microbunching Instability Study for the PAL-XFEL Linac”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD42, pp. 125-128.
- G. Cheng, E. Daly, and M. Wiseman, “Pressure Safety of JLAB 12GeV Upgrade Cryomodule”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO055, pp. 718-722.
- Y. Nakamura, “STATUS REPORT ON JAERI-AVF CYCLOTRON SYSTEM”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P23, pp. XX-XX.
- Q. S. Shu et al., “SQUID-based Nondestructive Testing Instrument of Dished Niobium Sheets for SRF Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS055, pp. 2469-2471.
- R. Paparella et al., “INFN-LASA for the PIP-II Project”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 205-209.
- D. R. Walz and L. R. Lucas, “The Sphere-Dump" - A New Low-Cost High-Power Beam Dump Concept and a Catalytic Hydrogen-Oxygen Recombiner for Radioactive Water Systems"”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 613-618.
- J. H. Hong, J. H. Han, C. Kim, and H. Yang, “Bunch Arrival Time Monitor Test at PAL-XFEL ITF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 223-225.
- G. Chen and B. R. An, “Towards a Time-Constrained Service-Oriented Architecture for Automation and Control in Large-Scale Dynamic Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 760-764.
- J. K. Cobb and J. J. Muray, “Magnetic Field Measurement and Spectroscopy in Multipole Fields”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 395-401.
- R. A. Early and J. K. Cobb, “Calculations and Measurements for the SLAC SLC Positron Return Quadrupole Magnet”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1428-1431.
- M. Bertucci et al., “In-Depth Analysis of the Vertical Test Results of the Third-Harmonic Cavities for the E-XFEL Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2644-2647.
- A. A. Sulimov et al., “First RF Measurement Results for the European XFEL SC Cavity Production”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB012, pp. 195-197.
- C. Fischer et al., “Performance of the CERN ISR at 31.4 GeV”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3155-3158.
- M. Duncan, N. Eddy, R. Ainsworth, and Y.-K. Kim, “Instability threshold measurements in the IOTA ring at Fermilab”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP041, unpublished.
- R. Rodriguez, R. I. Cutler, J. Grippe, and J. Mynk, “Overview and Status of RF Systems for the SSC Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1250-1253.
- J. F. Chen, “Status of SRF Activities for SHINE”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOIXA01, unpublished.
- Y. D. Joo et al., “RF Accelerating Voltage of PLS-II Superconducting RF System for Stable Top-up Operation with Beam Current of 400 mA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3015-3017.
- S. K. Howry and A. R. Wilmunder, “A Microprocessor Controller for Phasing the Accelerator”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1804-1807.
- Y. Kim, J. Yu, S. Park, and S. Kang, “Design of the machine interlock system for Korea-4GSR”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1656-1658.
- P. Tenenbaum et al., “Precision Measurement of Transoprt Components”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2838-2841.
- S. Park, J. Yu, S. Kang, and Y. Kim, “Design of the Korea-4GSR Timing system”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 678-680.
- M. Duncan, N. Eddy, R. Ainsworth, and Y.-K. Kim, “Instability threshold measurements in the IOTA ring at Fermilab”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 479-483.
- H. Hanaki et al., “Construction of Injector System for SPring-8 X-FEL”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP014, pp. 425-427.
Back to search