Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD095, pp. 3320-3322.
[n] D. Horan, M. Ferguson, and R. Kustom, “Design and Performance of a 2-Megawatt High Voltage DC Test Load”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1936-1939.
[n] C. Beltran, A. Browman, and R. J. Macek, “Calculations and Observations of the Longitudinal Instability Caused by the Ferrite Inductors at the Los Alamos Proton Storage Ring (PSR)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPD004, pp. 326-328.
[n] P. G. Lane, P. Snopok, Y. Torun, E. Behnke, I. Y. Levine, and D. W. Peterson, “Acoustic Breakdown Localization in RF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2658-2660. doi:10.18429/JACoW-IPAC2015-WEPWA067
[n] H. A. Willax, “Status Report on the SIN Ring Cyclotron (Invited paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 114-126.
[n] D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356.
[n] H. Takaki, Y. Kobayashi, K. Matsuda, and Y. Kamiya, “A Lattice for the Future Project of VUV and Soft X-Ray High Brilliant Light Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR09, pp. 281-283.
[n] D. O. McCarron, J. F. Amundson, W. Pellico, L. K. Spentzouris, P. Spentzouris, and R. E. Tomlin, “Measurement and Simulation of Space-Charge Dependent Tune Separation in FNAL Booster”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAAB02, pp. 772-774.
[n] S. M. Meykopff, “Converting the Emittance Measurement MATLAB Tool Into a C++ Control System Server”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOPHA094, pp. XX-XX.
[n] J. Choi, “NSLS-II Dedicated Python Tools for Simulation and Analysis”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4134-4136. doi:10.18429/JACoW-IPAC2016-THPOY021
[n] Y. Irie et al., “Low-Output-Impedance RF System for the ISIS Second Harmonic Cavity”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC119, pp. 343-345.
[n] R. Veness, W. Andreazza, D. Gudkov, A. Miarnau Marin, and S. Samuelsson, “Metal 3D Additive Machining for in-Vacuum Beam Instrumentation”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 121-124. doi:10.18429/JACoW-MEDSI2018-TUPH36
[n] H. A. Willax, “Proposal for a 500 MeV Isochronous Cyclotron with Ring Magnet”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63H04, pp. XX-XX.
[n] K. Dunkel, C. Piel, P. vom Stein, and H. Vogel, “Production of S-band Accelerating Structures”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP30, pp. 666-668.
[n] K. Dunkel, F. Kremer, and C. Piel, “Performance of the SARAF Ion Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN009, pp. 1407-1409.
[n] L. Ventura, M. Migliorati, H. Damerau, and G. Sterbini, “Excitation of Longitudinal Coupled-bunch Oscillations with the Wide-band Cavity in the CERN PS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1724-1727. doi:10.18429/JACoW-IPAC2016-TUPOR028
[n] S. Kuroguchi et al., “Harnessing machine learning for the optimal design of ILC e-driven positron source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 886-888. doi:10.18429/JACoW-IPAC2024-MOPS69
[n] K. Dunkel, F. Kremer, C. Piel, and J. Plitzko, “Development and Performance of a Proton and Deuteron ECR Ion Source”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPPE023, unpublished.
[n] N. Tsoupas, J. Claus, E. Rodger, and H. W. Foelsche, “Design of a Lambertson Injection Magnet for the RHIC Machine”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2895-2898.
For LaTeX
Use Complete Form
For BibTeX
References
- M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD095, pp. 3320-3322.
- D. Horan, M. Ferguson, and R. Kustom, “Design and Performance of a 2-Megawatt High Voltage DC Test Load”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1936-1939.
- C. Beltran, A. Browman, and R. J. Macek, “Calculations and Observations of the Longitudinal Instability Caused by the Ferrite Inductors at the Los Alamos Proton Storage Ring (PSR)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPD004, pp. 326-328.
- P. G. Lane, P. Snopok, Y. Torun, E. Behnke, I. Y. Levine, and D. W. Peterson, “Acoustic Breakdown Localization in RF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2658-2660.
- H. A. Willax, “Status Report on the SIN Ring Cyclotron (Invited paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 114-126.
- D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356.
- H. Takaki, Y. Kobayashi, K. Matsuda, and Y. Kamiya, “A Lattice for the Future Project of VUV and Soft X-Ray High Brilliant Light Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR09, pp. 281-283.
- D. O. McCarron, J. F. Amundson, W. Pellico, L. K. Spentzouris, P. Spentzouris, and R. E. Tomlin, “Measurement and Simulation of Space-Charge Dependent Tune Separation in FNAL Booster”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAAB02, pp. 772-774.
- S. M. Meykopff, “Converting the Emittance Measurement MATLAB Tool Into a C++ Control System Server”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper MOPHA094, pp. XX-XX.
- J. Choi, “NSLS-II Dedicated Python Tools for Simulation and Analysis”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4134-4136.
- Y. Irie et al., “Low-Output-Impedance RF System for the ISIS Second Harmonic Cavity”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC119, pp. 343-345.
- R. Veness, W. Andreazza, D. Gudkov, A. Miarnau Marin, and S. Samuelsson, “Metal 3D Additive Machining for in-Vacuum Beam Instrumentation”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 121-124.
- H. A. Willax, “Proposal for a 500 MeV Isochronous Cyclotron with Ring Magnet”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63H04, pp. XX-XX.
- K. Dunkel, C. Piel, P. vom Stein, and H. Vogel, “Production of S-band Accelerating Structures”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP30, pp. 666-668.
- K. Dunkel, F. Kremer, and C. Piel, “Performance of the SARAF Ion Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN009, pp. 1407-1409.
- L. Ventura, M. Migliorati, H. Damerau, and G. Sterbini, “Excitation of Longitudinal Coupled-bunch Oscillations with the Wide-band Cavity in the CERN PS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1724-1727.
- S. Kuroguchi et al., “Harnessing machine learning for the optimal design of ILC e-driven positron source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS69, pp. 886-888.
- K. Dunkel, F. Kremer, C. Piel, and J. Plitzko, “Development and Performance of a Proton and Deuteron ECR Ion Source”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE023, unpublished.
- N. Tsoupas, J. Claus, E. Rodger, and H. W. Foelsche, “Design of a Lambertson Injection Magnet for the RHIC Machine”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2895-2898.
Back to search