JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Morales Vigo et al., “Linearity and Response Time of the LHC Diamond Beam Loss Monitors in the CLEAR Beam Test Facility at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 355-358. doi:10.18429/JACoW-IPAC2022-MOPOPT046
[n]	N. Voumard, C. Boucly, M. P. Pimentel, P. Van Trappen, and L. Strobino, “Use of Multi-Network Fieldbus for Integration of Low-Level Intelligent Controller Within Control Architecture of Fast Pulsed System at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 590. doi:10.18429/JACoW-ICALEPCS2019-MOPHA152
[n]	M. Migliorati, L. Palumbo, G. Dattoli, and L. Mezi, “A Saw Tooth Instability Model in Storage Rings”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA60, pp. 1219-1221. 
[n]	L. van Riesen-Haupt, R. Tomas, and T. Pieloni, “Insertion Region Optics Correction Strategies for FCC-ee”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL057, unpublished. 
[n]	K. F. Mulholland, J. Knudstrup, and F. Pellegrin, “A New Communication Interface for the European Southern Observatory (ESO)'s Very Large Telescope Technical Detector Control System Using Aravis, an Open-Source Library for GenICam Cameras”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 443. doi:10.18429/JACoW-ICALEPCS2019-MOPHA098
[n]	S. Padden, E. Kukstas, K. Nordlund, P. Pusa, V. Rodin, and C. P. Welsch, “End to End Simulations of Antiproton Transport and Degradation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 847-850. doi:10.18429/JACoW-IPAC2021-MOPAB267
[n]	L. van Riesen-Haupt, G. Iadarola, R. Tomas, T. Pieloni, and T. Persson, “Updates on Accelerator Code Comparison Studies”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL056, unpublished. 
[n]	M. Oyamada et al., “CHARACTERIZATION AND CONDITIONING OF RF SYSTEMS OF THE SIAM PHOTON SOURCE”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEAM05, pp. XX-XX. 
[n]	B. Hendricks and R. H. Joshel, “Overview of the Next Generation of Fermilab Collider Software”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 243-245. doi:10.18429/JACoW-ICALEPCS1991-S06SA01
[n]	O. Brüning, “Overall status of the HL-LHC project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1322-1327. doi:10.18429/JACoW-IPAC2023-TUYG1
[n]	L. J. Laslett and L. Smith, “Stability of Intense Transported Beams”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3080-3083. 
[n]	H. N. Jungwirth et al., “Progress with New Beams and Facilities at NAC”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-09, pp. 625-628. 
[n]	P. Wang, N. Hower, and P. G. O'Shea, “RF Phasing of the Duke Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA13, pp. 932-934. 
[n]	K. Chen, S. Wang, G. Wang, and W. Xu, “Beam Based Alignment Using a Neural Network”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM066, unpublished. 
[n]	P. A. Kulyavtsev, G. V. Eremeev, S. Posen, B. Tennis, and J. Zasadzinski, “Commissioning of Dedicated Furnace for Nb₃Sn Coatings of 2.6 GHz Single Cell Cavities”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 216-218. doi:10.18429/JACoW-SRF2023-MOPMB047
[n]	J. E. Clendenin, G. A. Loew, R. H. Miller, J.-L. Pellegrin, and J. B. Truher, “Single Bunch Beam Measurements for the Proposed SLAC Linear Collider”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2452-2455. 
[n]	C. M. Celata et al., “Transverse Combining of Four Beams in MBE-4”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPA10, pp. 3220-3222. 
[n]	V. N. Litvinenko et al., “Commissioning of the Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA08, pp. 213-215. 
[n]	Y. Makdisi, K. Brown, J. W. Glenn, and E. Rodger, “Beam Catcher/Dump”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3057-3060. 
[n]	P. Collier et al., “Reducing the SPS Machine Impedance”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI082, pp. 1458-1460. 
[n]	D. Raparia, N. Okay, K. Saadatmand, J. W. Lenz, and J. Hebert, “Comparison of Experimental and Simulated Results for the SSC LEBT”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3151-3154. 
[n]	R. Hettel et al., “Digital Orbit Feedback Control for SPEAR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ22, pp. 2717-2719. 
[n]	S. Hermle, D. Einfeld, E. Huttel, and G. Heidenreich, “Layout of the Absorbers for the Synchrotron Light Source ANKA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA121, pp. 1360-1362. 
[n]	N. Orr et al., “On Line Isotopic Separator Test Benches at GANIL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1792-1795. 
[n]	D. Garcia, G. Adhikari, P. Musumeci, and T. Vecchione, “Wafer-compatible photocathode plug design for high gradient RF photoinjector”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1464-1466. doi:10.18429/JACoW-IPAC2025-TUPS024
[n]	J. N. Weaver, J. Sebek, H. Morales, P. Golceff, and R. D. Genin, “Experience with a Radio Frequency Gun on the SSRL Injector Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3018-3021. 
[n]	L. Sabato, L. Mether, G. Iadarola, and T. Pieloni, “Electron cloud build-up studies for FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2854-2857. doi:10.18429/JACoW-IPAC2023-WEPA092
[n]	S. R. Marques et al., “Improvements on Sirius Beam Stability”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 226-229. doi:10.18429/JACoW-IPAC2022-MOPOPT002
[n]	D. Reitmann, “A Brief History of South Africa's Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper BNQT-01, pp. 3-5. 
[n]	M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2889-2892. doi:10.18429/JACoW-IPAC2021-WEPAB122

For LaTeX

Use Complete Form

For BibTeX

References

Back to search