Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Vall?®au et al., “Construction and Optimization of Cryogenic Undulators at SOLEIL”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 193-198. doi:10.18429/JACoW-FLS2018-THP2WD01
[n] A. L. Allen et al., “Measurements of Reduced Corkscrew Motion on the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3094-3097.
[n] J. Cheng, G. S. Nusinovich, and P. E. Latham, “Stability of Gyrotwistrons”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2659-2661.
[n] D. H. Edgell, I. N. Bogatu, J. S. Kim, R. C. Pardo, and R. C. Vondrasek, “Modeling of Electron Cyclotron Resonance Ion Source Plasmas”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH026, pp. 2135-2137.
[n] S. A. Martin et al., “COSY-A Cooler Synchrotron and Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2694-2697.
[n] W. B. Herrmannsfeldt, “The SLAC Recirculating Linear Accelerator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 910-914.
[n] P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
[n] K. F. Johnson et al., “Phase-Scan Analysis Results for the First Drift Tube Linac Module in the Ground Test Accelerator: Data Reproducibility and Comparison to Simulations”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR19, pp. 1161-1163.
[n] C. M. Jones, J. L. Fricke, B. Piosczyk, and J. E. Vetter, “A Slow Tuner for Superconducting Helically Loaded Resonant Cavities”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G02, pp. 163-167.
[n] J. Y. Tang et al., “Spallation Neutron Source Drift Tube Linac Resonance Control Cooling System Modeling”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT068, pp. 3754-3756.
[n] T.-S. Ueng, J.-C. Chang, Y.-C. Lin, and H. S. Wang, “The Conceptual Design of TPS Grounding System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP050, pp. 2911-2913.
[n] R. J. Ducar, “A CAMAC Serial Crate Controller for the Tevatron Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2303-2305.
[n] J. H. Kamperschroer, J. R. Nelson, D. W. O, and R. T. Shelton, “Target Diagnostic Instrument-Based Controls Framework for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB10, pp. 184-186.
[n] I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2910-2913. doi:10.18429/JACoW-IPAC2017-WEPIK002
[n] D. H. Nordby, “Ion Source Work at ANL”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-2, pp. 470-473.
[n] R. D?Âlling, R. Dressler, and L. Calabretta, “A Test of Stripper Foil Lifetime in PSI's 72 MeV Proton Beam”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 338-341. doi:10.18429/JACoW-HB2018-WEP2PO033
[n] E. Daly et al., “Procurements for LCLS-II Cryomodules at JLab”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB110, pp. 1405-1408.
[n] S. Meyer and A. Chan, “A Components Database Design and Implementation for Accelerators and Detectors”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P031, pp. 2517-2519.
[n] N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX.
[n] V. Variale, V. Valentino, G. Brautti, A. Boggia, and A. Raino', “First Tests of the Trapped Ion Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA11, pp. 1905-1907.
[n] R. E. Hester et al., “The Experimental Test Accelerator (ETA)”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4180-4183.
[n] A. Mondelli, C. Chang, A. Drobot, K. Ko, A. Mankofsky, and J. Petillo, “Application of the ARGUS Code to Accelerator Design Calculations”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 877-880.
[n] S. J. Werkema, “Control of Trapped Ion Instabilities in the Fermilab Antiproton Accumulator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR20, pp. 3397-3399.
[n] N. V. Mokhov, J. C. Goldstein, D. C. Wilson, R. P. Godwin, and C. A. Wingate, “Hydrodynamic Calculations of 20-TeV Beam Interactions with the SSC Beam Dump”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3090-3093.
[n] A. McElderry, B. Billett, J. A. Carter, and K. J. Wakefield, “Final Design of NEG-Coated Aluminum Vacuum Chambers & Stainless Steel Keyhole Vacuum Chambers for the APS-U Storage Ring”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 480-482. doi:10.18429/JACoW-NAPAC2019-TUPLS12
For LaTeX
Use Complete Form
For BibTeX
References
- M. Vall?®au et al., “Construction and Optimization of Cryogenic Undulators at SOLEIL”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 193-198.
- A. L. Allen et al., “Measurements of Reduced Corkscrew Motion on the ETA-II Linear Induction Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3094-3097.
- J. Cheng, G. S. Nusinovich, and P. E. Latham, “Stability of Gyrotwistrons”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2659-2661.
- D. H. Edgell, I. N. Bogatu, J. S. Kim, R. C. Pardo, and R. C. Vondrasek, “Modeling of Electron Cyclotron Resonance Ion Source Plasmas”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH026, pp. 2135-2137.
- S. A. Martin et al., “COSY-A Cooler Synchrotron and Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2694-2697.
- W. B. Herrmannsfeldt, “The SLAC Recirculating Linear Accelerator”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 910-914.
- P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
- K. F. Johnson et al., “Phase-Scan Analysis Results for the First Drift Tube Linac Module in the Ground Test Accelerator: Data Reproducibility and Comparison to Simulations”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR19, pp. 1161-1163.
- C. M. Jones, J. L. Fricke, B. Piosczyk, and J. E. Vetter, “A Slow Tuner for Superconducting Helically Loaded Resonant Cavities”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G02, pp. 163-167.
- J. Y. Tang et al., “Spallation Neutron Source Drift Tube Linac Resonance Control Cooling System Modeling”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT068, pp. 3754-3756.
- T.-S. Ueng, J.-C. Chang, Y.-C. Lin, and H. S. Wang, “The Conceptual Design of TPS Grounding System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP050, pp. 2911-2913.
- R. J. Ducar, “A CAMAC Serial Crate Controller for the Tevatron Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2303-2305.
- J. H. Kamperschroer, J. R. Nelson, D. W. O, and R. T. Shelton, “Target Diagnostic Instrument-Based Controls Framework for the National Ignition Facility (NIF)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB10, pp. 184-186.
- I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2910-2913.
- D. H. Nordby, “Ion Source Work at ANL”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART5-2, pp. 470-473.
- R. D?Âlling, R. Dressler, and L. Calabretta, “A Test of Stripper Foil Lifetime in PSI's 72 MeV Proton Beam”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 338-341.
- E. Daly et al., “Procurements for LCLS-II Cryomodules at JLab”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB110, pp. 1405-1408.
- S. Meyer and A. Chan, “A Components Database Design and Implementation for Accelerators and Detectors”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P031, pp. 2517-2519.
- N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX.
- V. Variale, V. Valentino, G. Brautti, A. Boggia, and A. Raino', “First Tests of the Trapped Ion Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA11, pp. 1905-1907.
- R. E. Hester et al., “The Experimental Test Accelerator (ETA)”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4180-4183.
- A. Mondelli, C. Chang, A. Drobot, K. Ko, A. Mankofsky, and J. Petillo, “Application of the ARGUS Code to Accelerator Design Calculations”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 877-880.
- S. J. Werkema, “Control of Trapped Ion Instabilities in the Fermilab Antiproton Accumulator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR20, pp. 3397-3399.
- N. V. Mokhov, J. C. Goldstein, D. C. Wilson, R. P. Godwin, and C. A. Wingate, “Hydrodynamic Calculations of 20-TeV Beam Interactions with the SSC Beam Dump”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3090-3093.
- A. McElderry, B. Billett, J. A. Carter, and K. J. Wakefield, “Final Design of NEG-Coated Aluminum Vacuum Chambers & Stainless Steel Keyhole Vacuum Chambers for the APS-U Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 480-482.
Back to search