Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. C. Lira, F. C. Arroyo, and E. K. C. S. Hayashi, “Septum and Kicker Pulsers for the LNLS 500-MeV Booster Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH016, pp. 3699-3701.
[n] C. R. J. Charles, F. Ames, M. Cavenaile, and B. E. Schultz, “Simulations of the CANREB EBIS: Where Might the Issue(s) Be?”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper TH2WH04, unpublished.
[n] S. M. Qaim et al., “Production of Longer-Lived Positron Emitters 73Se, 82mRb and 124I”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-03, pp. 541-544.
[n] K. Oide et al., “A Few Issues on the Upgrade of KEKB B-Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO3RAI01, pp. 23-27.
[n] J. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and R. X. Yuan, “Beam Experiment of Low Q CBPM Prototype for SXFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 202-204. doi:10.18429/JACoW-IPAC2016-MOPMB049
[n] Y. Shobuda, Y. H. Chin, K. Takata, K. G. Nakamura, and T. Toyama, “Stripline Beam Position Monitors With Improved Frequency Response and Their Coupling Impedances”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 523-528. doi:10.18429/JACoW-HB2016-THPM10X01
[n] Y. B. Leng, L. W. Lai, L. Y. Yu, R. X. Yuan, J. Chen, and Z. C. Chen, “Cavity BPM Performance Online Evaluation using PCA Method”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 208-210. doi:10.18429/JACoW-IPAC2016-MOPMB051
[n] E. Meintanis and E. Stiliaris, “Estimation of Transversal Emittance using an Artificial Neural Network”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B17, pp. 1812-1814.
[n] J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 304-308. doi:10.18429/JACoW-MEDSI2016-WECA07
[n] K. Kaspar and H. G. K?Ânig, “Development of the Fast Feedback System for the GSI SIS Cavities”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A08, pp. 1841-1843.
[n] R. Amirikas and M. Kubczigk, “Introducing a Homepage for Information Retrieval and Backup of the Ground Vibration Measurements and Mechanical Vibrations of the Superconducting Modules at DESY”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN007, pp. 2059-2061.
[n] C. Boffo, D. Connolly, L. Elementi, and Y. Tereshkin, “Control System for the BCP Processing Facility at FNAL”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP04, pp. 278-281.
[n] J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 152-155. doi:10.18429/JACoW-MEDSI2016-TUPE01
[n] E. Tanabe, A. McEuen, M. Trail, G. Meddaugh, and S. Bandy, “Microwave Field Emission”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-74, pp. 525-527.
[n] C. J. Taylor, “Livermore Cyclotron Beam Features”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D07, pp. 208-210.
[n] S. Takeuchi, T. Ishii, and H. Ikezoe, “Progress in RF-Superconductivity for Heavy-Ion Acceleration at JAERI”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G05, pp. XX-XX.
[n] H.-J. Eckoldt et al., “XFEL Modulators with Pulse Cables”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2487-2489. doi:10.18429/JACoW-IPAC2018-WEPMF053
[n] C. Wiesner, L. P. Chau, M. Droba, O. Meusel, and U. Ratzinger, “A 250 kHz Chopper for Low Energy High Intensity Proton Beams”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP111, pp. 3623-3625.
[n] D. A. Zavadtsev et al., “Construction and RF Test of the Debuncher for NICA Light Ion Beam Line”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 197-199. doi:10.18429/JACoW-RUPAC2018-TUPSA25
[n] Y. Tereshkin, C. Boffo, G. Davis, H. Edwards, and A. Rowe, “BCP Processing Facility”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP47, pp. 447-450.
[n] G. Arnolds-Mayer, H. Downar, and T. Friesen, “On Niobium Sputter Coated Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1187-1190.
[n] N. Pupeter et al., “A Modular Digital LLRF Control System for Normal as well as Superconducting RF Accelerators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP072, pp. 2174-2176.
[n] T. Hoffmann et al., “Beam Instrumentation and Data Acquisition for CRYRING@ESR”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 446-448. doi:10.18429/JACoW-ICALEPCS2015-MOPGF153
[n] J. Dedic, D. Golob, A. Hasanovic, and M. Plesko, “Extremely Low-jitter FPGA Based Synchronization Timing System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN063, pp. 296-298.
[n] J. Kamiya et al., “Evaluation of 2-D Transverse Beam Profile Monitor Using Gas Sheet at J-PARC LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2539-2542. doi:10.18429/JACoW-IPAC2019-WEPGW032
[n] N. Marks, J. B. Lyall, and M. W. Poole, “NINA Programmed Quadrupoles”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1586-1589.
[n] V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 689-692. doi:10.18429/JACoW-ICALEPCS2015-WEPGF001
[n] H. Ao et al., “Fabrication and Cold Test Result of FRIB =0.53 Pre-production Cryomodule”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 120-124. doi:10.18429/JACoW-SRF2017-MOPB031
[n] E. Schneidmiller and M. V. Yurkov, “Harmonic Lasing in X-ray FELs”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2873-2875. doi:10.18429/JACoW-IPAC2014-THPRO009
[n] K. Endo, K. Egawa, Z. Fang, and S. Yamanaka, “Hardware Tracking Related to Compact Medical Pulse Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP032, pp. 2260-2262.
[n] S. I. Bibko, I. K. Sedlyarov, and V. G. Veshtcherevich, “Superconducting RF Cavity for Factory”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E06, pp. XX-XX.
[n] F. Sonnemann, K. Dahlerup-Petersen, F. Rodriguez-Mateos, and R. Schmidt, “Energy Extraction for the LHC Superconducting Circuits”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH093, pp. 3448-3450.
[n] S. Y. Lee, “A High Betatron Amplitude Insertion for the SSCMEB Lattice”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 694-696.
[n] K. Nakayoshi, Y. Fujii, and K. Sakashita, “Improvements in the T2K Primary Beamline Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA10, pp. 940-943.
[n] F. Hug and R. G. Heine, “Injector Linac Stability Requirements for High Precision Experiments at MESA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 876-879. doi:10.18429/JACoW-IPAC2017-MOPVA014
[n] W. Xu, S. A. Belomestnykh, I. Ben-Zvi, H. Hahn, and E. C. Johnson, “New HOM Coupler Design for High Current SRF Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP060, pp. 925-927.
[n] E. Schneidmiller and M. V. Yurkov, “Reverse Undulator Tapering for Polarization Control at XFELs”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 722-724. doi:10.18429/JACoW-IPAC2016-MOPOW008
[n] P. Li, L. J. Mao, J. W. Xia, J. C. Yang, D. Y. Yin, and Y. J. Yuan, “Simulation Study of Transverse Spectrum in HIRFL-CSR”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP130, pp. 1722-1724.
[n] I. Ben-Zvi et al., “Beam Break-up Estimates for the ERL at BNL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEOBRA03, pp. 2441-2443.
[n] G. Bachy, C. Hauviller, R. Messerli, and M. Mottier, “Computer-Aided Engineering in High Energy Physics”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1146-1149.
[n] G. V. Stupakov et al., “Direct Measurement of Geometric Wakefields from Tapered Rectangular Collimators”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOA09, pp. 56-58.
For LaTeX
Use Complete Form
For BibTeX
References
- A. C. Lira, F. C. Arroyo, and E. K. C. S. Hayashi, “Septum and Kicker Pulsers for the LNLS 500-MeV Booster Synchrotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH016, pp. 3699-3701.
- C. R. J. Charles, F. Ames, M. Cavenaile, and B. E. Schultz, “Simulations of the CANREB EBIS: Where Might the Issue(s) Be?”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper TH2WH04, unpublished.
- S. M. Qaim et al., “Production of Longer-Lived Positron Emitters 73Se, 82mRb and 124I”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-03, pp. 541-544.
- K. Oide et al., “A Few Issues on the Upgrade of KEKB B-Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO3RAI01, pp. 23-27.
- J. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and R. X. Yuan, “Beam Experiment of Low Q CBPM Prototype for SXFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 202-204.
- Y. Shobuda, Y. H. Chin, K. Takata, K. G. Nakamura, and T. Toyama, “Stripline Beam Position Monitors With Improved Frequency Response and Their Coupling Impedances”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 523-528.
- Y. B. Leng, L. W. Lai, L. Y. Yu, R. X. Yuan, J. Chen, and Z. C. Chen, “Cavity BPM Performance Online Evaluation using PCA Method”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 208-210.
- E. Meintanis and E. Stiliaris, “Estimation of Transversal Emittance using an Artificial Neural Network”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B17, pp. 1812-1814.
- J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 304-308.
- K. Kaspar and H. G. K?Ânig, “Development of the Fast Feedback System for the GSI SIS Cavities”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A08, pp. 1841-1843.
- R. Amirikas and M. Kubczigk, “Introducing a Homepage for Information Retrieval and Backup of the Ground Vibration Measurements and Mechanical Vibrations of the Superconducting Modules at DESY”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN007, pp. 2059-2061.
- C. Boffo, D. Connolly, L. Elementi, and Y. Tereshkin, “Control System for the BCP Processing Facility at FNAL”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP04, pp. 278-281.
- J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 152-155.
- E. Tanabe, A. McEuen, M. Trail, G. Meddaugh, and S. Bandy, “Microwave Field Emission”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-74, pp. 525-527.
- C. J. Taylor, “Livermore Cyclotron Beam Features”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D07, pp. 208-210.
- S. Takeuchi, T. Ishii, and H. Ikezoe, “Progress in RF-Superconductivity for Heavy-Ion Acceleration at JAERI”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G05, pp. XX-XX.
- H.-J. Eckoldt et al., “XFEL Modulators with Pulse Cables”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2487-2489.
- C. Wiesner, L. P. Chau, M. Droba, O. Meusel, and U. Ratzinger, “A 250 kHz Chopper for Low Energy High Intensity Proton Beams”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP111, pp. 3623-3625.
- D. A. Zavadtsev et al., “Construction and RF Test of the Debuncher for NICA Light Ion Beam Line”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 197-199.
- Y. Tereshkin, C. Boffo, G. Davis, H. Edwards, and A. Rowe, “BCP Processing Facility”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP47, pp. 447-450.
- G. Arnolds-Mayer, H. Downar, and T. Friesen, “On Niobium Sputter Coated Cavities”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1187-1190.
- N. Pupeter et al., “A Modular Digital LLRF Control System for Normal as well as Superconducting RF Accelerators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP072, pp. 2174-2176.
- T. Hoffmann et al., “Beam Instrumentation and Data Acquisition for CRYRING@ESR”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 446-448.
- J. Dedic, D. Golob, A. Hasanovic, and M. Plesko, “Extremely Low-jitter FPGA Based Synchronization Timing System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN063, pp. 296-298.
- J. Kamiya et al., “Evaluation of 2-D Transverse Beam Profile Monitor Using Gas Sheet at J-PARC LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2539-2542.
- N. Marks, J. B. Lyall, and M. W. Poole, “NINA Programmed Quadrupoles”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1586-1589.
- V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 689-692.
- H. Ao et al., “Fabrication and Cold Test Result of FRIB =0.53 Pre-production Cryomodule”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 120-124.
- E. Schneidmiller and M. V. Yurkov, “Harmonic Lasing in X-ray FELs”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2873-2875.
- K. Endo, K. Egawa, Z. Fang, and S. Yamanaka, “Hardware Tracking Related to Compact Medical Pulse Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP032, pp. 2260-2262.
- S. I. Bibko, I. K. Sedlyarov, and V. G. Veshtcherevich, “Superconducting RF Cavity for Factory”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E06, pp. XX-XX.
- F. Sonnemann, K. Dahlerup-Petersen, F. Rodriguez-Mateos, and R. Schmidt, “Energy Extraction for the LHC Superconducting Circuits”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH093, pp. 3448-3450.
- S. Y. Lee, “A High Betatron Amplitude Insertion for the SSCMEB Lattice”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 694-696.
- K. Nakayoshi, Y. Fujii, and K. Sakashita, “Improvements in the T2K Primary Beamline Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA10, pp. 940-943.
- F. Hug and R. G. Heine, “Injector Linac Stability Requirements for High Precision Experiments at MESA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 876-879.
- W. Xu, S. A. Belomestnykh, I. Ben-Zvi, H. Hahn, and E. C. Johnson, “New HOM Coupler Design for High Current SRF Cavity”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP060, pp. 925-927.
- E. Schneidmiller and M. V. Yurkov, “Reverse Undulator Tapering for Polarization Control at XFELs”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 722-724.
- P. Li, L. J. Mao, J. W. Xia, J. C. Yang, D. Y. Yin, and Y. J. Yuan, “Simulation Study of Transverse Spectrum in HIRFL-CSR”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP130, pp. 1722-1724.
- I. Ben-Zvi et al., “Beam Break-up Estimates for the ERL at BNL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEOBRA03, pp. 2441-2443.
- G. Bachy, C. Hauviller, R. Messerli, and M. Mottier, “Computer-Aided Engineering in High Energy Physics”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1146-1149.
- G. V. Stupakov et al., “Direct Measurement of Geometric Wakefields from Tapered Rectangular Collimators”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOA09, pp. 56-58.
Back to search