JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. M. Gibson, A. Arteche, A. Bosco, S. E. Bashforth, M. Krupa, and T. Lefevre, “Enhanced Bunch Monitoring by Interferometric Electro-Optic Methods”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2353-2356. doi:10.18429/JACoW-IPAC2018-WEPAL073
[n]	E. Van der Bij et al., “Open Hardware for CERN's Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUBAULT04, pp. 554-557. 
[n]	E. Wang et al., “Heat Load of a P-Doped GaAs Photocathode in an SRF Electron Gun”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC024, pp. 1767-1769. 
[n]	R. Arcidiacono et al., “CMS DCS Design Concepts”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_062. 
[n]	P. A. Piminov and E. B. Levichev, “Symplectic Integrator for Particle Tracking in Complex Magnetic Field”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI054, pp. 1655-1657. 
[n]	W. Booth, E. B. Blanco Vinuela, B. Bradu, L. Gomez Palacin, M. Quilichini, and D. Willeman, “Re-Engineering Control Systems using Automatic Generation Tools and Process Simulation: the LHC Water Cooling Case”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC076, pp. 1242-1245. 
[n]	Yu. A and N. Yu. Yazvitskii, “DESIGN AND TESTS OF A SUPERCONDUCTING MAGNET WITH A CRYOCOOLER FOR THE ION SOURCE DECRIS-SC”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP09, pp. XX-XX. 
[n]	G. Penacoba Fernandez et al., “Design of an FPGA-based Radiation Tolerant Agent for WorldFIP Fieldbus”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS102, pp. 1780-1782. 
[n]	S. Wagner, R. Schmidt, B. Todd, J. A. Uythoven, and M. Zerlauth, “A Failure Catalogue for the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC174, pp. 2394-2396. 
[n]	W. Xu et al., “Beam Commissioning of the SRF 704 MHz Photoemission Gun”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP012, pp. 70-72. 
[n]	R. Alemany-Fernandez et al., “The LHC Sequencer”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN027, pp. 300-303. 
[n]	G. Eremeev, H. Padamsee, M. Liepe, and R. Roy, “Effect of Mild Baking on High Field Q-Drop of BCP Cavity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP18, pp. 70-73. 
[n]	F. Loehl and P. Szypryt, “Active Beam Current Stabilization in the Cornell ERL Prototype Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO018, pp. 523-525. 
[n]	R. Stassen, P. B. Brittner, R. Greven, H. Singer, H. Stockhorst, and L. Thorndahl, “Recent Developments for the HESR Stochastic Cooling System”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP13, pp. 191-193. 
[n]	C.-C. Chang, C. K. Chan, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and S-N. Hsu, “Manufacturing and Welding Process of Straight Section of Aluminum Alloy UHV Chambers for Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD019, pp. 2537-2539. 
[n]	S. Nagaitsev et al., “Status of the Fermilab Electron Cooling Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI032, pp. 1094-1096. 
[n]	P. Mandrillon et al., “Feasibility Studies of the EULIMA Light Ion Medical Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 179-182. 
[n]	V. Dudnikov, R. Hren, C. W. Schmidt, and J. Wendt, “High Current Density Negative Ion Source for Beam Line Transport Studies”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH006, pp. 2090-2092. 
[n]	C. D. Beard et al., “EMMA RF Cavity Design and Prototype Testing at Daresbury”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP002, pp. 3374-3376. 
[n]	X. Cui, C. H. Yu, J. Y. Zhai, and Y. Zhang, “An On-axis Injection Design for CEPC”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 143. doi:10.18429/JACoW-eeFACT2018-TUPAB05
[n]	Ch. Schmidt et al., “Performance of the MTCA.4 Based LLRF System at FLASH”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2433-2435. doi:10.18429/JACoW-IPAC2014-WEPME067
[n]	S. Schlenker et al., “The ATLAS Detector Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOBAUST02, pp. 5-8. 
[n]	E. Wang et al., “Quantum Efficiency, Temporal Response and Lifetime of GaAs cathode in SRF Electron Gun”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC023, pp. 1764-1766. 
[n]	G. Daniluk and E. Gousiou, “Plans at CERN for Electronics and Communication in the Distributed I/O Tier”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1552-1556. doi:10.18429/JACoW-ICALEPCS2017-THPHA071
[n]	M. Koratzinos et al., “TLEP: High-performance Circular e+e- Collider to Study the Higgs Boson”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME040, pp. 1658-1660. 
[n]	D. E. Young, V. Dudnikov, M. Popovic, C. W. Schmidt, and D. Sun, “Low Energy Improvements to the Fermilab 400-MeV Linear Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH102, pp. 3915-3917. 
[n]	G. Turemen et al., “Current Status of the SANAEM RFQ Accelerator Beamline”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3952-3955. doi:10.18429/JACoW-IPAC2015-THPF103
[n]	R. A. Rimmer, J. Guo, J. Henry, H. Wang, S. Wang, and Y. L. Huang, “RF System Requirements for a Medium-Energy Electron-Ion Collider (MEIC) at JLab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3536-3539. doi:10.18429/JACoW-IPAC2015-WEPWI022
[n]	Ch. Schmidt et al., “Recent Developments of the European XFEL LLRF System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME009, pp. 2941-2943. 
[n]	F. Varela, W. J. Fabian, P. Golonka, M. Gonzalez-Berges, and L. B. Petrova, “High-level Functions for Modern Control Systems: A Practical Example”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC081, pp. 1262-1265. 
[n]	A. Guirao et al., “Update on the Development of the New Electronic Instrumentation for the LIPAc/IFMIF Beam Position Monitors”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1025-1028. doi:10.18429/JACoW-IPAC2015-MOPTY043
[n]	R. E. Laxdal, G. Stanford, Y. Bylinskii, T. Ries, B. Rawnsley, and I. Sekatchev, “Engineering and Cryogenic Testing of the ISAC-II Medium Beta Cryomodule”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP16, pp. 630-632. 
[n]	K. Szamota-Leandersson et al., “PolFEL ÔÇö New Facility in Poland”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 746-748. doi:10.18429/JACoW-FEL2019-THP081
[n]	D. Alesini et al., “High Power Test Results of the SPARC C-Band Accelerating Structures”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 39-41. doi:10.18429/JACoW-IPAC2014-MOOCA01
[n]	U. Mavric et al., “Performance of a Compact LLRF System using Analog RF Backplane in MTCA.4 Crates”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2438-2440. doi:10.18429/JACoW-IPAC2014-WEPME069
[n]	F. Varela, F. B. Bernard, M. Gonzalez-Berges, H. Milcent, and L. B. Petrova, “Monitoring Control Applications at CERN”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU033, pp. 1141-1144. 
[n]	M. Galonska et al., “Commissioning of the Ion Beam Gantry at HIT”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOAB03, pp. 2874-2876. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search