Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Madec et al., “Status of E-XFEL String and Cryomodule Assembly at CEA-Saclay”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB09, pp. 831-833.
[n] Y. Sumitomo, K. Hayakawa, Y. Hayakawa, K. Nogami, T. Sakai, and T. Tanaka, “Toward THz Coherent Undulator Radiation Experiment with a Combination of Velocity Bunchings”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1663-1665. doi:10.18429/JACoW-IPAC2021-TUPAB116
[n] C. J. Gardner, Y. Y. Lee, and A. U. Luccio, “Accumulator Ring Lattice for the National Spallation Neutron Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W006, pp. 962-964.
[n] P. Michel et al., “Investigation and Improvement of Beam Stability at the ELBE FELs”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper FRAAU03, pp. 543-547.
[n] A. A. Polyanskii et al., “Inhomogeneous Flux Penetration in Niobium Sheet Sampled Across the Cavity Production Route”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP55, pp. 375-378.
[n] J. D. Fox, L. Beckman, D. Teytelman, D. Van Winkle, and A. Young, “Development and Testing of a Low Group-delay Woofer Channel for PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT155, pp. 2822-2824.
[n] A. A. S. Awwal, S. W. Ferguson, B. Horowitz, V. J. Miller Kamm, C. A. Reynolds, and K. C. Wilhelmsen, “Automatic Alignment System for the National Ignition Facility”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper ROAA02, pp. 486-490.
[n] W. Van Goethem, F. Antoniou, F. Asvesta, H. Bartosik, and A. Huschauer, “Zero Dispersion Optics to Improve Horizontal Emittance Measurements at the CERN Proton Synchrotron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 503-506. doi:10.18429/JACoW-IPAC2022-MOPOTK028
[n] I. Pinayev, J. Rose, T. V. Shaftan, and L.-H. Yu, “Injection Simulations for NSLS-II Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS077, pp. 1350-1352.
[n] G. Fortuna et al., “The Alpi Project at Legnaro National Laboratory”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87D04, pp. XX-XX.
[n] M. J. Hogan et al., “Review of Beam-Driven Plasma Wakefield Experiments at SLAC”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TOPA002, unpublished.
[n] G. Feng et al., “Beam Dynamics Simulation for FLASH2 HGHG Option”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP020, pp. 471-474.
[n] M. Kuntzsch, M. Gensch, U. Lehnert, P. Michel, R. Schurig, and J. Teichert, “Jitter Analysis at CW Repetition Rate With Large Spectral Range and High Resolution”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 43-45. doi:10.18429/JACoW-IBIC2015-MOPB009
[n] M. A. Fraser, J. C. Broere, S. Haastrup, D. Lanaia, D. Valuch, and D. Voulot, “Understanding the Error Tolerances Required to Automatically Phase the HIE-ISOLDE Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP031, pp. 496-498.
[n] J. Wu, R. A. Bosch, B. Jia, A. A. Lutman, and J. J. Welch, “The Imperfectness of Electron Bunch Initial Longitudinal Phase Space on a Seeded Free Electron Laser Performance”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB27, pp. 87-90.
[n] Z. Li, D. Chabot, S. Cogan, S. M. Lidia, and R. C. Webber, “FRIB Fast Machine Protection System: Chopper Monitor System Design”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 336-338. doi:10.18429/JACoW-LINAC2018-TUPO007
[n] H. Carter, G. Romanov, T. Arkan, N. Khabiboulline, and G. Linder, “Measurements of High Order Modes in High Phase Advance Damped Detuned Accelerating Structure for NLC”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP83, pp. 791-793.
[n] D. C. Plostinar and G. H. Rees, “A Linac-Based Approach to Modelling an Orbit Separated Cyclotron”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP130, pp. 364-366.
[n] Y. Jung et al., “Low Temperature Heat Treatment on the HWR Cavity”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 779. doi:10.18429/JACoW-SRF2021-THPCAV002
[n] B. List, L. Hagge, J. Kreutzkamp, and N. J. Walker, “Engineering Data Management for the ILC Site Specific Design Phase”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1839-1841. doi:10.18429/JACoW-IPAC2014-TUPRI116
For LaTeX
Use Complete Form
For BibTeX
References
- C. Madec et al., “Status of E-XFEL String and Cryomodule Assembly at CEA-Saclay”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB09, pp. 831-833.
- Y. Sumitomo, K. Hayakawa, Y. Hayakawa, K. Nogami, T. Sakai, and T. Tanaka, “Toward THz Coherent Undulator Radiation Experiment with a Combination of Velocity Bunchings”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1663-1665.
- C. J. Gardner, Y. Y. Lee, and A. U. Luccio, “Accumulator Ring Lattice for the National Spallation Neutron Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W006, pp. 962-964.
- P. Michel et al., “Investigation and Improvement of Beam Stability at the ELBE FELs”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper FRAAU03, pp. 543-547.
- A. A. Polyanskii et al., “Inhomogeneous Flux Penetration in Niobium Sheet Sampled Across the Cavity Production Route”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP55, pp. 375-378.
- J. D. Fox, L. Beckman, D. Teytelman, D. Van Winkle, and A. Young, “Development and Testing of a Low Group-delay Woofer Channel for PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT155, pp. 2822-2824.
- A. A. S. Awwal, S. W. Ferguson, B. Horowitz, V. J. Miller Kamm, C. A. Reynolds, and K. C. Wilhelmsen, “Automatic Alignment System for the National Ignition Facility”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper ROAA02, pp. 486-490.
- W. Van Goethem, F. Antoniou, F. Asvesta, H. Bartosik, and A. Huschauer, “Zero Dispersion Optics to Improve Horizontal Emittance Measurements at the CERN Proton Synchrotron”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 503-506.
- I. Pinayev, J. Rose, T. V. Shaftan, and L.-H. Yu, “Injection Simulations for NSLS-II Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS077, pp. 1350-1352.
- G. Fortuna et al., “The Alpi Project at Legnaro National Laboratory”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87D04, pp. XX-XX.
- M. J. Hogan et al., “Review of Beam-Driven Plasma Wakefield Experiments at SLAC”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOPA002, unpublished.
- G. Feng et al., “Beam Dynamics Simulation for FLASH2 HGHG Option”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP020, pp. 471-474.
- M. Kuntzsch, M. Gensch, U. Lehnert, P. Michel, R. Schurig, and J. Teichert, “Jitter Analysis at CW Repetition Rate With Large Spectral Range and High Resolution”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 43-45.
- M. A. Fraser, J. C. Broere, S. Haastrup, D. Lanaia, D. Valuch, and D. Voulot, “Understanding the Error Tolerances Required to Automatically Phase the HIE-ISOLDE Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP031, pp. 496-498.
- J. Wu, R. A. Bosch, B. Jia, A. A. Lutman, and J. J. Welch, “The Imperfectness of Electron Bunch Initial Longitudinal Phase Space on a Seeded Free Electron Laser Performance”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOPB27, pp. 87-90.
- Z. Li, D. Chabot, S. Cogan, S. M. Lidia, and R. C. Webber, “FRIB Fast Machine Protection System: Chopper Monitor System Design”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 336-338.
- H. Carter, G. Romanov, T. Arkan, N. Khabiboulline, and G. Linder, “Measurements of High Order Modes in High Phase Advance Damped Detuned Accelerating Structure for NLC”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP83, pp. 791-793.
- D. C. Plostinar and G. H. Rees, “A Linac-Based Approach to Modelling an Orbit Separated Cyclotron”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP130, pp. 364-366.
- Y. Jung et al., “Low Temperature Heat Treatment on the HWR Cavity”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 779.
- B. List, L. Hagge, J. Kreutzkamp, and N. J. Walker, “Engineering Data Management for the ILC Site Specific Design Phase”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1839-1841.
Back to search